Testing with Ubuntu 8.10 and no ehci_hcd: no oops but the device is not
accessible.

With no ehci_hcd loaded, this is what I get when I insert the card
reader:

[  830.760185] usb 4-2: new full speed USB device using uhci_hcd and address 2
[  830.934123] usb 4-2: configuration #1 chosen from 1 choice
[  830.949049] scsi6 : SCSI emulation for USB Mass Storage devices
[  830.952785] usb-storage: device found at 2
[  830.952797] usb-storage: waiting for device to settle before scanning
[  835.954520] usb-storage: device scan complete
[  836.637436] scsi 6:0:0:0: Direct-Access     Generic                   6000 
PQ: 0 ANSI: 0 CCS
[  836.648266] sd 6:0:0:0: [sdb] 1987584 512-byte hardware sectors (1018 MB)
[  836.651260] sd 6:0:0:0: [sdb] Write Protect is off
[  836.651271] sd 6:0:0:0: [sdb] Mode Sense: 4b 00 00 08
[  836.651277] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  836.675516] sd 6:0:0:0: [sdb] 1987584 512-byte hardware sectors (1018 MB)
[  836.679344] sd 6:0:0:0: [sdb] Write Protect is off
[  836.679356] sd 6:0:0:0: [sdb] Mode Sense: 4b 00 00 08
[  836.679362] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  836.679374]  sdb:<3>end_request: I/O error, dev sdb, sector 0
[  836.814378] __ratelimit: 5 callbacks suppressed
[  836.814386] Buffer I/O error on device sdb, logical block 0

and this is what happens during lsusb:

[  866.924193] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[  882.036225] usb 4-2: device descriptor read/64, error -110
[  897.252189] usb 4-2: device descriptor read/64, error -110
[  897.468182] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[  912.580205] usb 4-2: device descriptor read/64, error -110
[  927.852188] usb 4-2: device descriptor read/64, error -110
[  928.124184] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[  938.532183] usb 4-2: device not accepting address 2, error -110
[  938.644177] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[  949.052175] usb 4-2: device not accepting address 2, error -110
[  949.052300] usb 4-2: USB disconnect, address 2
[  949.052333] sd 6:0:0:0: Device offlined - not ready after error recovery
[  949.052350] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ABORT 
driverbyte=DRIVER_OK,SUGGEST_OK
[  949.052359] end_request: I/O error, dev sdb, sector 0
[  949.052369] Buffer I/O error on device sdb, logical block 0
[  949.052452] sd 6:0:0:0: rejecting I/O to offline device
[  949.052460] Buffer I/O error on device sdb, logical block 0
[  949.052488] sd 6:0:0:0: rejecting I/O to offline device
[  949.052495] Buffer I/O error on device sdb, logical block 0
[  949.052511] sd 6:0:0:0: rejecting I/O to offline device
[  949.052517] Buffer I/O error on device sdb, logical block 0
[  949.052526] ldm_validate_partition_table(): Disk read failed.
[  949.052538] sd 6:0:0:0: rejecting I/O to offline device
[  949.052543] Buffer I/O error on device sdb, logical block 0
[  949.052558] sd 6:0:0:0: rejecting I/O to offline device
[  949.052563] Buffer I/O error on device sdb, logical block 0
[  949.052578] sd 6:0:0:0: rejecting I/O to offline device
[  949.052583] Buffer I/O error on device sdb, logical block 0
[  949.052598] sd 6:0:0:0: rejecting I/O to offline device
[  949.052603] Buffer I/O error on device sdb, logical block 0
[  949.052612] Dev sdb: unable to read RDB block 0
[  949.052623] sd 6:0:0:0: rejecting I/O to offline device
[  949.052628] Buffer I/O error on device sdb, logical block 0
[  949.052643] sd 6:0:0:0: rejecting I/O to offline device
[  949.052674] sd 6:0:0:0: rejecting I/O to offline device
[  949.052690] sd 6:0:0:0: rejecting I/O to offline device
[  949.052705] sd 6:0:0:0: rejecting I/O to offline device
[  949.052722] sd 6:0:0:0: rejecting I/O to offline device
[  949.052730]  unable to read partition table
[  949.052968] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  949.053192] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  949.169180] usb 4-2: new full speed USB device using uhci_hcd and address 3
[  964.336203] usb 4-2: device descriptor read/64, error -110
[  979.608200] usb 4-2: device descriptor read/64, error -110
[  979.824182] usb 4-2: new full speed USB device using uhci_hcd and address 4
[  994.936097] usb 4-2: device descriptor read/64, error -110
[ 1010.152178] usb 4-2: device descriptor read/64, error -110
[ 1010.368196] usb 4-2: new full speed USB device using uhci_hcd and address 5

lsusb takes a lot of time but it finally shows something (but not the
card reader):

  ~$ lsusb 
  Bus 006 Device 003: ID 05a9:7670 OmniVision Technologies, Inc. 
  Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

-- 
lsusb causes oops when an USB MicroSD card reader is present
https://bugs.launchpad.net/bugs/115329
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to