** Description changed:

  The symptoms I see are very similar to bug 193970 but with a different
  wireless chipset.  I can't tell whether it's the same problem or not, so
  I'm filing a separate bug as it's easier to merge them than to tear them
  apart.
  
- If I turn off the (physical) RF kill switch after it has been on (either
- since boot or after having activated it manually), the LED never turns
- on and the card doesn't scan:
+ If I turn off the (physical) RF kill switch after it has been on since
+ boot, the LED never turns on and the card doesn't scan:
  
  perseus:[~] sudo iwlist wlan0 scan
  wlan0     No scan results
  
  Nothing is shown in dmesg from iwlagn when I turn off the kill switch,
  but other RF devices in the system change state, so I can see that it's
  working:
  
  [ 1622.808097] usb 5-1: new full speed USB device using uhci_hcd and address 3
  [ 1622.978959] usb 5-1: configuration #1 chosen from 1 choice
  [ 1623.078159] usbcore: registered new interface driver usbserial
  [ 1623.079377] usbserial: USB Serial support registered for generic
  [ 1623.080048] usbcore: registered new interface driver usbserial_generic
  [ 1623.080054] usbserial: USB Serial Driver core
  [ 1623.083579] usbserial: USB Serial support registered for Sierra USB modem
  [ 1623.084636] sierra 5-1:1.0: Sierra USB modem converter detected
  [ 1623.087396] usb 5-1: Sierra USB modem converter now attached to ttyUSB0
  [ 1623.088828] usb 5-1: Sierra USB modem converter now attached to ttyUSB1
  [ 1623.090216] usb 5-1: Sierra USB modem converter now attached to ttyUSB2
  [ 1623.090927] usbcore: registered new interface driver sierra
  [ 1623.090931] sierra: USB Driver for Sierra Wireless USB modems: v.1.3.2
  
  
  Unloading and reloading the module gets it working, i.e. the LED turns on and 
scanning works:
  
  perseus:[~] sudo modprobe -r iwlagn && sudo modprobe iwlagn
  perseus:[~] sudo iwlist wlan0 scan
  wlan0     Scan completed :
            Cell 01 - Address: 00:1C:10:A3:02:15
  [...lots of networks...]
  
+ Once I've done this, I can toggle the switch on, confirm no scan
+ results, turn it back on, and get results again.
+ 
  ProblemType: Bug
  Architecture: amd64
  DistroRelease: Ubuntu 8.10
  Package: linux-image-2.6.27-5-generic 2.6.27-5.8 [modified: 
lib/modules/2.6.27-5-generic/modules.pcimap 
lib/modules/2.6.27-5-generic/modules.dep 
lib/modules/2.6.27-5-generic/modules.ieee1394map 
lib/modules/2.6.27-5-generic/modules.usbmap 
lib/modules/2.6.27-5-generic/modules.isapnpmap 
lib/modules/2.6.27-5-generic/modules.inputmap 
lib/modules/2.6.27-5-generic/modules.seriomap 
lib/modules/2.6.27-5-generic/modules.alias 
lib/modules/2.6.27-5-generic/modules.symbols]
  ProcCmdLine: root=UUID=305dde78-d20a-4248-aaf4-09447b7c5791 ro quiet splash
  ProcEnviron:
   LC_COLLATE=C
   
PATH=/home/username/bin:/usr/lib/ccache:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/sbin:/usr/sbin:/usr/games:/usr/lib/surfraw
   LANG=en_US.UTF-8
   SHELL=/bin/zsh
  ProcVersionSignature: Ubuntu 2.6.27-5.8-generic
  SourcePackage: linux

-- 
iwlagn wifi never comes up after RF kill is disabled
https://bugs.launchpad.net/bugs/278008
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to