On 12/03/2026 12:22, Boon Khai Ng wrote: > - Add a call to phy_reset() in ksz9031_config() to ensure the PHY is > properly reset during initialization. > - This clears the power-down bit and ensures the PHY recovers correctly > after Linux reboot. > > Tested on Agilex5 hardware with KSZ90X1 PHY. > > Signed-off-by: Boon Khai Ng <[email protected]> > --- > drivers/net/phy/micrel_ksz90x1.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/net/phy/micrel_ksz90x1.c > b/drivers/net/phy/micrel_ksz90x1.c > index f357e0f1c77..1a7116f4ddd 100644 > --- a/drivers/net/phy/micrel_ksz90x1.c > +++ b/drivers/net/phy/micrel_ksz90x1.c > @@ -407,6 +407,9 @@ static int ksz9031_config(struct phy_device *phydev) > if (ret) > return ret; > > + /* soft reset */ > + phy_reset(phydev); > + > ksz90x1_workaround_asymmetric_pause(phydev); > > /* add an option to disable the gigabit feature of this PHY */
Queued for net-next, thanks! -- Jerome
