On Thu, 2026-02-19 at 11:03 +0100, Julien Stephan wrote: > This adds support for the MT8395_EVK board with the following > features enabled/tested: Boot, UART, Watchdog and MMC. > > MT8395_EVK is based on MT8195. > > Signed-off-by: Julien Stephan <[email protected]> > --- > board/mediatek/MAINTAINERS | 5 +++++ > configs/mt8395_evk_defconfig | 26 ++++++++++++++++++++++++++ > 2 files changed, 31 insertions(+) > > diff --git a/board/mediatek/MAINTAINERS b/board/mediatek/MAINTAINERS > index 5954607439a..446a9e8e53c 100644 > --- a/board/mediatek/MAINTAINERS > +++ b/board/mediatek/MAINTAINERS > @@ -13,3 +13,8 @@ M: Julien Masson <[email protected]> > M: Macpaul Lin <[email protected]> > S: Maintained > F: configs/mt8390_evk_defconfig > + > +MT8395 EVK > +M: Macpaul Lin <[email protected]> > +S: Maintained > +F: configs/mt8395_evk_defconfig > diff --git a/configs/mt8395_evk_defconfig > b/configs/mt8395_evk_defconfig > new file mode 100644 > index 00000000000..2edf3cb3e35 > --- /dev/null > +++ b/configs/mt8395_evk_defconfig > @@ -0,0 +1,26 @@ > +CONFIG_ARM=y > +CONFIG_COUNTER_FREQUENCY=13000000 > +CONFIG_POSITION_INDEPENDENT=y > +CONFIG_ARCH_MEDIATEK=y > +CONFIG_TEXT_BASE=0x4c000000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEFAULT_DEVICE_TREE="mediatek/mt8395-genio-1200-evk" > +CONFIG_TARGET_MT8195=y > +CONFIG_SYS_LOAD_ADDR=0x60000000 > +CONFIG_IDENT_STRING=" mt8395-evk" > +# CONFIG_BOARD_INIT is not set > +CONFIG_CMD_CLK=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_PART=y > +CONFIG_OF_UPSTREAM=y > +CONFIG_CLK=y > +CONFIG_MMC_MTK=y > +CONFIG_PINCTRL=y > +CONFIG_PINCONF=y > +CONFIG_PINCTRL_MT8195=y > +CONFIG_BAUDRATE=921600 > +CONFIG_DM_SERIAL=y > +CONFIG_MTK_SERIAL=y > +CONFIG_WDT=y > +CONFIG_WDT_MTK=y >
Reviewed-by: Macpaul Lin <[email protected]> Thanks! Macpaul Lin
