From: Peng Fan <[email protected]> Rely on serial driver calling clk_enable to enable the lpuart clk, no need to do init_uart_clk in board_early_init_f().
Also remove board_early_init_f(), because it is empty now. Signed-off-by: Peng Fan <[email protected]> --- board/nxp/imx95_evk/imx95_evk.c | 8 -------- board/nxp/imx95_evk/spl.c | 2 -- configs/imx95_15x15_evk_defconfig | 1 - configs/imx95_evk.config | 1 - 4 files changed, 12 deletions(-) diff --git a/board/nxp/imx95_evk/imx95_evk.c b/board/nxp/imx95_evk/imx95_evk.c index ca1d916deab..620a69b53e5 100644 --- a/board/nxp/imx95_evk/imx95_evk.c +++ b/board/nxp/imx95_evk/imx95_evk.c @@ -7,14 +7,6 @@ #include <asm/arch/clock.h> #include <asm/mach-imx/sys_proto.h> -int board_early_init_f(void) -{ - /* UART1: A55, UART2: M33, UART3: M7 */ - init_uart_clk(0); - - return 0; -} - int board_late_init(void) { if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC)) diff --git a/board/nxp/imx95_evk/spl.c b/board/nxp/imx95_evk/spl.c index 752d7f916b6..761a1a4a0f6 100644 --- a/board/nxp/imx95_evk/spl.c +++ b/board/nxp/imx95_evk/spl.c @@ -67,8 +67,6 @@ void board_init_f(ulong dummy) arch_cpu_init(); - board_early_init_f(); - preloader_console_init(); debug("SOC: 0x%x\n", gd->arch.soc_rev); diff --git a/configs/imx95_15x15_evk_defconfig b/configs/imx95_15x15_evk_defconfig index f3099f14401..5c7b3941550 100644 --- a/configs/imx95_15x15_evk_defconfig +++ b/configs/imx95_15x15_evk_defconfig @@ -38,7 +38,6 @@ CONFIG_BOOTCOMMAND="bootflow scan -l; run bsp_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx95-15x15-evk.dtb" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074 -CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_BOARD_INIT is not set CONFIG_BOARD_LATE_INIT=y CONFIG_PCI_INIT_R=y diff --git a/configs/imx95_evk.config b/configs/imx95_evk.config index 631ec23c335..58b8fc2a01a 100644 --- a/configs/imx95_evk.config +++ b/configs/imx95_evk.config @@ -37,7 +37,6 @@ CONFIG_BOOTCOMMAND="bootflow scan -l; run bsp_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx95-19x19-evk.dtb" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074 -CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_BOARD_INIT is not set CONFIG_BOARD_LATE_INIT=y CONFIG_PCI_INIT_R=y -- 2.51.0
