You are right, I used a tool to verify everything was in order, but I
did it in the last commit... Will send a v3.
Il 30/10/25 14:36, Tom Rini ha scritto:
On Thu, Oct 30, 2025 at 09:47:08AM +0100, Andrea Calabrese wrote:
readme was missing instructions to build M2B. Now added.
Signed-off-by: Andrea Calabrese <[email protected]>
[snip]
diff --git a/doc/board/bsh/imx6ulz_bsh_smm_m2.rst
b/doc/board/bsh/imx6ulz_bsh_smm_m2.rst
new file mode 100644
index 00000000000..c61dbfe2ae7
--- /dev/null
+++ b/doc/board/bsh/imx6ulz_bsh_smm_m2.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+How to Update U-Boot on imx6ulz_smm_m2 and imx6ulz_smm_m2b boards
+==================================================================================
Please see doc/build/documentation.rst for how to build the
documentation as there's errors here that will trip CI. Headings (===)
need to be the exact length as the text. Everything else is probably
fine but I can't always spot spacing errors without building. I don't
know if Fabio wants to fix this part up when applying. Thanks!
--
Andrea Calabrese
Embedded Software Developer
M. +39 339 394 4747
[email protected]
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9170
[email protected]
www.amarulasolutions.com
__________________________________
This message and any file transmitted with it may contain privileged or
confidential information. In case you were not listed in the addressed
recipient, please notify the sender immediately and delete the message.
Any other use of this email, including copying it and the disclosure of its
content, is prohibited.
