From: Yegor Yefremov <[email protected]> Typos found via codespell utility.
Signed-off-by: Yegor Yefremov <[email protected]> --- drivers/usb/musb-new/musb_core.c | 2 +- drivers/usb/musb-new/musb_gadget.c | 4 ++-- drivers/usb/musb-new/musb_host.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index a14b127dc37..17ec0d3acbd 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -1954,7 +1954,7 @@ musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev, /* The musb_platform_init() call: * - adjusts musb->mregs and musb->isr if needed, - * - may initialize an integrated tranceiver + * - may initialize an integrated transceiver * - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c index 08fac829ce7..7daff5850f1 100644 --- a/drivers/usb/musb-new/musb_gadget.c +++ b/drivers/usb/musb-new/musb_gadget.c @@ -728,7 +728,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * mode 0 only. So we do not get endpoint interrupts due to DMA * completion. We only get interrupts from DMA controller. * - * We could operate in DMA mode 1 if we knew the size of the tranfer + * We could operate in DMA mode 1 if we knew the size of the transfer * in advance. For mass storage class, request->length = what the host * sends, so that'd work. But for pretty much everything else, * request->length is routinely more than what the host sends. For @@ -1422,7 +1422,7 @@ done: } /* - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any * data but will queue requests. * * exported to ep0 code diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c index 7528a53d73e..7f296d15984 100644 --- a/drivers/usb/musb-new/musb_host.c +++ b/drivers/usb/musb-new/musb_host.c @@ -1862,7 +1862,7 @@ static int musb_schedule( head = &musb->out_bulk; /* Enable bulk RX NAK timeout scheme when bulk requests are - * multiplexed. This scheme doen't work in high speed to full + * multiplexed. This scheme doesn't work in high speed to full * speed scenario as NAK interrupts are not coming from a * full speed device connected to a high speed device. * NAK timeout interval is 8 (128 uframe or 16ms) for HS and -- 2.34.1
