The family of PCA9450 PMICs have the ability to perform system resets.
Restarting via PMIC is preferred method of restarting the system as all
the peripherals are brought to a know state after a power-cycle. The
PCA9450 features a cold restart procedure which is initiated by an I2C
command 0x14 to the SW_RST register.
Support in Linux for restarting via PCA9450 PMIC has been added by
Linux commit 6157e62b07d9 ("regulator: pca9450: Add restart handler").
Now add support for it also in the U-Boot via sysreset framework.
Signed-off-by: Primoz Fiser <[email protected]>
Reviewed-by: Paul Geurts <[email protected]>
---
Changes in v3:
- rebase custodians/u-boot-mmc branch: next
- add Reviewed-by: tags
Link to v2:
https://lore.kernel.org/all/[email protected]/
drivers/power/pmic/pca9450.c | 44 ++++++++++++++++++++++++++++++++++++
include/power/pca9450.h | 2 ++
2 files changed, 46 insertions(+)
diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c
index 0e3d14abf154..8b98c2239e13 100644
--- a/drivers/power/pmic/pca9450.c
+++ b/drivers/power/pmic/pca9450.c
@@ -6,13 +6,17 @@
#include <fdtdec.h>
#include <errno.h>
#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
#include <i2c.h>
#include <log.h>
#include <asm/global_data.h>
+#include <linux/delay.h>
#include <linux/printk.h>
#include <power/pmic.h>
#include <power/regulator.h>
#include <power/pca9450.h>
+#include <sysreset.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -79,6 +83,15 @@ static int pca9450_bind(struct udevice *dev)
static int pca9450_probe(struct udevice *dev)
{
unsigned int reset_ctrl;
+ int ret;
+
+ if (CONFIG_IS_ENABLED(SYSRESET)) {
+ ret = device_bind_driver_to_node(dev, "pca9450_sysreset",
+ "pca9450_sysreset",
+ dev_ofnode(dev), NULL);
+ if (ret)
+ return ret;
+ }
if (ofnode_read_bool(dev_ofnode(dev), "nxp,wdog_b-warm-reset"))
reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_WARM;
@@ -112,3 +125,34 @@ U_BOOT_DRIVER(pmic_pca9450) = {
.probe = pca9450_probe,
.ops = &pca9450_ops,
};
+
+#ifdef CONFIG_SYSRESET
+static int pca9450_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+ u8 cmd = PCA9450_SW_RST_COLD_RST;
+
+ if (type != SYSRESET_COLD)
+ return -EPROTONOSUPPORT;
+
+ if (pmic_write(dev->parent, PCA9450_SW_RST, &cmd, 1)) {
+ dev_err(dev, "reset command failed\n");
+ } else {
+ /* tRESTART is 250ms, delay 300ms just to be sure */
+ mdelay(300);
+ /* Should not get here, warn if we do */
+ dev_warn(dev, "didn't respond to reset command\n");
+ }
+
+ return -EINPROGRESS;
+}
+
+static struct sysreset_ops pca9450_sysreset_ops = {
+ .request = pca9450_sysreset_request,
+};
+
+U_BOOT_DRIVER(pca9450_sysreset) = {
+ .name = "pca9450_sysreset",
+ .id = UCLASS_SYSRESET,
+ .ops = &pca9450_sysreset_ops,
+};
+#endif /* CONFIG_SYSRESET */
diff --git a/include/power/pca9450.h b/include/power/pca9450.h
index e5ab09fb8c83..9119ef793b1f 100644
--- a/include/power/pca9450.h
+++ b/include/power/pca9450.h
@@ -75,4 +75,6 @@ enum {
#define PCA9450_PMIC_RESET_WDOG_B_CFG_WARM 0x40
#define PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12 0x80
+#define PCA9450_SW_RST_COLD_RST 0x14
+
#endif
--
2.34.1
