From: Alice Guo <[email protected]> USB3 nodes have been added to dts files in dts/upstream now. This patch is used to enable USB Gadget in SPL to make i.MX95 19x19 evk board can use SDP on USB3 interface.
Signed-off-by: Alice Guo <[email protected]> --- arch/arm/dts/imx95-19x19-evk-u-boot.dtsi | 8 ++++++++ configs/imx95_19x19_evk_defconfig | 13 ++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi b/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi index 2d1f02baa5f..f60ca4b9346 100644 --- a/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi +++ b/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi @@ -13,6 +13,14 @@ bootph-pre-ram; }; +&usb3 { + bootph-pre-ram; +}; + +&usb3_dwc3 { + bootph-pre-ram; +}; + &usdhc1 { bootph-pre-ram; }; diff --git a/configs/imx95_19x19_evk_defconfig b/configs/imx95_19x19_evk_defconfig index 73818a82627..306611a9169 100644 --- a/configs/imx95_19x19_evk_defconfig +++ b/configs/imx95_19x19_evk_defconfig @@ -42,7 +42,7 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_BOARD_INIT is not set CONFIG_BOARD_LATE_INIT=y CONFIG_PCI_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_MAX_SIZE=0x30000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/scmi/container.cfg" @@ -147,6 +147,17 @@ CONFIG_FSL_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_NXP_FSPI=y +CONFIG_USB=y +CONFIG_SPL_DM_USB_GADGET=y +CONFIG_USB_DWC3=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_SPL_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9 +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152 +CONFIG_SDP_LOADADDR=0x90400000 +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_ULP_WATCHDOG=y CONFIG_LZO=y CONFIG_BZIP2=y -- 2.43.0
