The CONFIG_ENV_OFFSET value is too low and the imx6dl sabresd board no longer boots.
There have been attempts to increase CONFIG_ENV_OFFSET in the past, but the suggestion was to enable LTO, which worked well for some time. Give more room to CONFIG_ENV_OFFSET so that the board can boot again. Adjust the CONFIG_BOARD_SIZE_LIMIT to take this into account: CONFIG_BOARD_SIZE_LIMIT = CONFIG_BOARD_SIZE_LIMIT - 69k = 9779920 Signed-off-by: Fabio Estevam <[email protected]> --- configs/mx6sabresd_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index f041f1fd1a3b..f66d6f413ee7 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -8,7 +8,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 +CONFIG_ENV_OFFSET=0x100000 CONFIG_MX6QDL=y CONFIG_TARGET_MX6SABRESD=y CONFIG_DM_GPIO=y @@ -21,7 +21,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_PCI=y CONFIG_LTO=y CONFIG_HAS_BOARD_SIZE_LIMIT=y -CONFIG_BOARD_SIZE_LIMIT=715766 +CONFIG_BOARD_SIZE_LIMIT=977920 CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y -- 2.34.1
