A few i2c drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <[email protected]> --- Cc: Heiko Schocher <[email protected]> --- drivers/i2c/Kconfig | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 146bc621c7e4..602ac9a9c704 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -181,6 +181,7 @@ config SYS_I2C_IPROC config SYS_I2C_FSL bool "Freescale I2C bus driver" + depends on M68K || PPC help Add support for Freescale I2C busses as used on MPC8240, MPC8245, and MPC85xx processors. @@ -240,7 +241,7 @@ config SYS_I2C_DW config SYS_I2C_DW_PCI bool "Designware PCI I2C Controller" - depends on SYS_I2C_DW && PCI && ACPIGEN + depends on SYS_I2C_DW && PCI && ACPIGEN && X86 default y help Say yes here to select the Designware PCI I2C Host Controller. @@ -277,6 +278,7 @@ config SYS_I2C_INTEL config SYS_I2C_IMX_LPI2C bool "NXP i.MX LPI2C driver" + depends on MACH_IMX help Add support for the NXP i.MX LPI2C driver. @@ -314,6 +316,7 @@ config SYS_I2C_MICROCHIP config SYS_I2C_MXC bool "NXP MXC I2C driver" + depends on MACH_IMX help Add support for the NXP I2C driver. This supports up to four bus channels and operating on standard mode up to 100 kbits/s and fast @@ -485,7 +488,7 @@ endif config SYS_I2C_NEXELL bool "Nexell I2C driver" - depends on DM_I2C + depends on DM_I2C && ARCH_NEXELL help Add support for the Nexell I2C driver. This is used with various Nexell parts such as S5Pxx18 series SoCs. All chips @@ -494,6 +497,7 @@ config SYS_I2C_NEXELL config SYS_I2C_NPCM bool "Nuvoton NPCM I2C driver" + depends on ARCH_NPCM help Support for Nuvoton I2C controller driver. @@ -533,7 +537,7 @@ config SYS_I2C_RCAR_IIC config SYS_I2C_ROCKCHIP bool "Rockchip I2C driver" - depends on DM_I2C + depends on DM_I2C && ARCH_ROCKCHIP help Add support for the Rockchip I2C driver. This is used with various Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips @@ -750,6 +754,7 @@ config SYS_I2C_MV config SYS_I2C_MVTWSI bool "Marvell I2C driver" + depends on ARCH_KIRKWOOD || ARCH_MVEBU || ARCH_SUNXI help Support for Marvell I2C controllers as used on the orion5x and kirkwood SoC families. -- 2.43.0
