Replace current ad-hoc generation of SA0 header with renesas_rcar4_sa0 binman etype on Renesas R-Car V4H. The new binman etype generates header which is almost identical to the current ad-hoc SA0 header, with one difference, the load length matches the actual payload size, which slightly improves boot time.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Ilias Apalodimas <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Simon Glass <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- V2: No change --- arch/arm/dts/r8a779g0-u-boot.dtsi | 78 ++++++------------------------- 1 file changed, 15 insertions(+), 63 deletions(-) diff --git a/arch/arm/dts/r8a779g0-u-boot.dtsi b/arch/arm/dts/r8a779g0-u-boot.dtsi index cc9d99b0f34..83f67876d87 100644 --- a/arch/arm/dts/r8a779g0-u-boot.dtsi +++ b/arch/arm/dts/r8a779g0-u-boot.dtsi @@ -9,73 +9,25 @@ / { binman: binman { - multiple-images; - section { filename = "flash.bin"; pad-byte = <0xff>; - /* Offset 0x0000 set to 0x0000_0000 */ - fill@0 { - offset = <0x0>; - size = <0x4>; - fill-byte = [00]; - }; - - /* Offset 0x300c set to 0x0000_0000 */ - fill@300c { - offset = <0x300c>; - size = <0x4>; - fill-byte = [00]; - }; - - /* Offset 0x3154 set to 0xeb21_0000 */ - fill@3154 { - offset = <0x3154>; - size = <0x2>; - fill-byte = [00]; - }; - - fill@3156 { - offset = <0x3156>; - size = <0x1>; - fill-byte = [21]; - }; - - fill@3157 { - offset = <0x3157>; - size = <0x1>; - fill-byte = [eb]; - }; - - /* Offset 0x3264 set to 0x0003_b000 */ - fill@3264 { - offset = <0x3264>; - size = <0x1>; - fill-byte = [00]; - }; - - fill@3265 { - offset = <0x3265>; - size = <0x1>; - fill-byte = [b0]; - }; - - fill@3266 { - offset = <0x3266>; - size = <0x1>; - fill-byte = [03]; - }; - - fill@3267 { - offset = <0x3267>; - size = <0x1>; - fill-byte = [00]; - }; - - u-boot-spl { - offset = <0x40000>; - align-end = <4>; + renesas-rcar4-sa0 { + filename = "sa0.bin"; + pad-byte = <0xff>; + renesas,loader-address = <CONFIG_SPL_TEXT_BASE>; + + /* + * This section starts after 0x40000 Bytes long + * header added by the renesas-rcar4-sa0 binman + * etype. That means u-boot-spl {} below starts + * at offset 0x40000 in flash.bin . + */ + u-boot-spl { + offset = <0x40000>; + align-end = <4>; + }; }; u-boot { -- 2.47.2
