Add a pin map configuration for using the UART8 controller on the stm32h743 MCU.
Signed-off-by: Dario Binacchi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Torgue <[email protected]> [ upstream commit: 47d16ab94b8e5e85aedba3cd22cfdf3877bf1dfb ] --- dts/upstream/src/arm/st/stm32h7-pinctrl.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/dts/upstream/src/arm/st/stm32h7-pinctrl.dtsi b/dts/upstream/src/arm/st/stm32h7-pinctrl.dtsi index ad00c1080a96..96022afd0168 100644 --- a/dts/upstream/src/arm/st/stm32h7-pinctrl.dtsi +++ b/dts/upstream/src/arm/st/stm32h7-pinctrl.dtsi @@ -211,6 +211,19 @@ }; }; + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('J', 8, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('J', 9, AF8)>; /* UART8_RX */ + bias-disable; + }; + }; + usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ -- 2.43.0
