Re: [PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process

Wed, 04 Jun 2025 23:12:01 -0700 

Hey Neha,

On 03/06/25 11:34, Neha Malcom Francis wrote:

On 28/05/25 13:35, Moteen Shah wrote:

Print DM firmware's version in the boot up process of K3 devices.

Signed-off-by: Moteen Shah <[email protected]>

This patch does not apply cleanly on the latest master, you may have to
rebase.


I will do a rebase and send a revision for this.
Thanks for the review.

Regards,
Moteen




---
  arch/arm/mach-k3/am62ax/am62a7_init.c | 4 ++++
  arch/arm/mach-k3/am62px/am62p5_init.c | 4 ++++
  arch/arm/mach-k3/am62x/am625_init.c   | 4 ++++
  arch/arm/mach-k3/am64x/am642_init.c   | 4 ++++
  arch/arm/mach-k3/am65x/am654_init.c   | 4 ++++
  arch/arm/mach-k3/j721e/j721e_init.c   | 4 ++++
  arch/arm/mach-k3/j721s2/j721s2_init.c | 4 ++++
  arch/arm/mach-k3/j722s/j722s_init.c   | 4 ++++
  arch/arm/mach-k3/j784s4/j784s4_init.c | 4 ++++
  9 files changed, 36 insertions(+)

diff --git a/arch/arm/mach-k3/am62ax/am62a7_init.c 
b/arch/arm/mach-k3/am62ax/am62a7_init.c
index 52a21277227..5bee04c5c31 100644
--- a/arch/arm/mach-k3/am62ax/am62a7_init.c
+++ b/arch/arm/mach-k3/am62ax/am62a7_init.c
@@ -172,6 +172,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        if (IS_ENABLED(CONFIG_ESM_K3)) {
                /* Probe/configure ESM0 */
                ret = uclass_get_device_by_name(UCLASS_MISC, "esm@420000", 
&dev);
diff --git a/arch/arm/mach-k3/am62px/am62p5_init.c 
b/arch/arm/mach-k3/am62px/am62p5_init.c
index 01e47deca94..304fdc75736 100644
--- a/arch/arm/mach-k3/am62px/am62p5_init.c
+++ b/arch/arm/mach-k3/am62px/am62p5_init.c
@@ -224,6 +224,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        if (IS_ENABLED(CONFIG_K3_AM62A_DDRSS)) {
                ret = uclass_get_device(UCLASS_RAM, 0, &dev);
                if (ret)
diff --git a/arch/arm/mach-k3/am62x/am625_init.c 
b/arch/arm/mach-k3/am62x/am625_init.c
index 595fc391ac5..5bcce365790 100644
--- a/arch/arm/mach-k3/am62x/am625_init.c
+++ b/arch/arm/mach-k3/am62x/am625_init.c
@@ -261,6 +261,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        if (IS_ENABLED(CONFIG_ESM_K3)) {
                /* Probe/configure ESM0 */
                ret = uclass_get_device_by_name(UCLASS_MISC, "esm@420000", 
&dev);
diff --git a/arch/arm/mach-k3/am64x/am642_init.c 
b/arch/arm/mach-k3/am64x/am642_init.c
index 41812b7dbf7..7a317632e5b 100644
--- a/arch/arm/mach-k3/am64x/am642_init.c
+++ b/arch/arm/mach-k3/am64x/am642_init.c
@@ -242,6 +242,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        do_dt_magic();
#if defined(CONFIG_ESM_K3) 
diff --git a/arch/arm/mach-k3/am65x/am654_init.c 
b/arch/arm/mach-k3/am65x/am654_init.c
index a4f038029d7..774ad7feb1d 100644
--- a/arch/arm/mach-k3/am65x/am654_init.c
+++ b/arch/arm/mach-k3/am65x/am654_init.c
@@ -244,6 +244,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        /* Perform board detection */
        do_board_detect();
diff --git a/arch/arm/mach-k3/j721e/j721e_init.c b/arch/arm/mach-k3/j721e/j721e_init.c 
index f31c20f7ed6..498243485f5 100644
--- a/arch/arm/mach-k3/j721e/j721e_init.c
+++ b/arch/arm/mach-k3/j721e/j721e_init.c
@@ -374,6 +374,10 @@ void board_init_f(ulong dummy)
        /* Output System Firmware version info */
        k3_sysfw_print_ver();
+ /* Output DM Firmware version info */ 
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
+
        /* Perform board detection */
        do_board_detect();
diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c 
index 5941fa26a95..528590f0434 100644
--- a/arch/arm/mach-k3/j721s2/j721s2_init.c
+++ b/arch/arm/mach-k3/j721s2/j721s2_init.c
@@ -232,6 +232,10 @@ void k3_spl_init(void)
/* Output System Firmware version info */ 
        k3_sysfw_print_ver();
+
+       /* Output DM Firmware version info */
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
  }
bool check_rom_loaded_sysfw(void) 
diff --git a/arch/arm/mach-k3/j722s/j722s_init.c 
b/arch/arm/mach-k3/j722s/j722s_init.c
index af211377e7c..d8123f282ee 100644
--- a/arch/arm/mach-k3/j722s/j722s_init.c
+++ b/arch/arm/mach-k3/j722s/j722s_init.c
@@ -150,6 +150,10 @@ static void k3_spl_init(void)
/* Output System Firmware version info */ 
        k3_sysfw_print_ver();
+
+       /* Output DM Firmware version info */
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
  }
static void k3_mem_init(void) 
diff --git a/arch/arm/mach-k3/j784s4/j784s4_init.c 
b/arch/arm/mach-k3/j784s4/j784s4_init.c
index 787cf6261e4..ccf29810849 100644
--- a/arch/arm/mach-k3/j784s4/j784s4_init.c
+++ b/arch/arm/mach-k3/j784s4/j784s4_init.c
@@ -208,6 +208,10 @@ void k3_spl_init(void)
/* Output System Firmware version info */ 
        k3_sysfw_print_ver();
+
+       /* Output DM Firmware version info */
+       if (IS_ENABLED(CONFIG_ARM64))
+               k3_dm_print_ver();
  }
void k3_mem_init(void)

Reply via email to