Hi, On 2025-04-12 16:27, Dang Huynh wrote: > Now that we have VOP2 support, let's enable it and support the > built in USB keyboard. > > Signed-off-by: Dang Huynh <[email protected]> > --- > configs/pinetab2-rk3566_defconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/configs/pinetab2-rk3566_defconfig > b/configs/pinetab2-rk3566_defconfig > index > 45e63b42d192dc172f24e071b09c8203675965d8..792ec0ec119437fd7a920558a149363c886c87de > 100644 > --- a/configs/pinetab2-rk3566_defconfig > +++ b/configs/pinetab2-rk3566_defconfig > @@ -57,6 +57,7 @@ CONFIG_BUTTON=y > CONFIG_BUTTON_ADC=y > CONFIG_BUTTON_GPIO=y > CONFIG_SPL_CLK=y > +CONFIG_CLK_CCF=y
Rockchip clk drivers does not use this, and I do not see any new clock driver being added in this series. Why is this needed? Regards, Jonas > # CONFIG_USB_FUNCTION_FASTBOOT is not set > CONFIG_ROCKCHIP_GPIO=y > CONFIG_SYS_I2C_ROCKCHIP=y > @@ -69,6 +70,7 @@ CONFIG_MMC_SDHCI_SDMA=y > CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_SPI_FLASH_SFDP_SUPPORT=y > CONFIG_SPI_FLASH_SILICONKAISER=y > +CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y > CONFIG_PHY_ROCKCHIP_INNO_USB2=y > CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y > CONFIG_SPL_PINCTRL=y > @@ -94,6 +96,7 @@ CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_GENERIC=y > CONFIG_USB_DWC3=y > CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_KEYBOARD=y > CONFIG_USB_HOST_ETHER=y > CONFIG_USB_ETHER_ASIX=y > CONFIG_USB_ETHER_ASIX88179=y > @@ -101,4 +104,12 @@ CONFIG_USB_ETHER_RTL8152=y > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_DOWNLOAD=y > CONFIG_USB_FUNCTION_ROCKUSB=y > +CONFIG_VIDEO=y > +CONFIG_VIDEO_LCD_BOE_TH101MB31IG002_28A=y > +CONFIG_DISPLAY=y > +CONFIG_VIDEO_ROCKCHIP=y > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y > +CONFIG_DISPLAY_ROCKCHIP_DW_MIPI=y > +CONFIG_VIDEO_BRIDGE=y > +CONFIG_VIDEO_REMOVE=y > CONFIG_ERRNO_STR=y >
