On 1/6/25 09:42, Michal Simek wrote:
From: Jonathan Stroud <[email protected]> Label all eeproms so we can open by label rather than a fixed i2c address. Signed-off-by: Jonathan Stroud <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 4 ++++ arch/arm/dts/zynqmp-sc-revB.dts | 1 + 2 files changed, 5 insertions(+) diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts index 4e0587fd441a..6e2d9542012a 100644 --- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts @@ -494,6 +494,7 @@ /* Use for storing information about SC board */ eeprom: eeprom@54 { /* u34 - m24128 16kB */ compatible = "st,24c128", "atmel,24c128"; + label = "eeprom_cc"; reg = <0x54>; /* 0x5c too */ }; si570_ref_clk: clock-generator@5d { /* u32 */ @@ -509,6 +510,7 @@ /* and connector J212D */ eeprom_ebm: eeprom@52 { /* x-ebm module */ compatible = "st,24c128", "atmel,24c128"; + label = "eeprom_ebm"; reg = <0x52>; }; }; @@ -520,6 +522,7 @@ /* expected eeprom 0x50 FMC cards */ eeprom_fmc1: eeprom@50 { compatible = "st,24c128", "atmel,24c128"; + label = "eeprom_fmc1"; reg = <0x50>; }; }; @@ -531,6 +534,7 @@ /* expected eeprom 0x50 FMC cards */ eeprom_fmc2: eeprom@50 { compatible = "st,24c128", "atmel,24c128"; + label = "eeprom_fmc2"; reg = <0x50>; }; }; diff --git a/arch/arm/dts/zynqmp-sc-revB.dts b/arch/arm/dts/zynqmp-sc-revB.dts index c4f70581695d..6f5856017bf3 100644 --- a/arch/arm/dts/zynqmp-sc-revB.dts +++ b/arch/arm/dts/zynqmp-sc-revB.dts @@ -175,6 +175,7 @@ /* Use for storing information about SC board */ eeprom: eeprom@54 { /* u34 - m24128 16kB */ compatible = "st,24c128", "atmel,24c128"; + label = "eeprom_cc"; reg = <0x54>; /* & 0x5c */ bootph-all; };
Applied. M
