On 10/01/2025 12:11, Baltazár Radics wrote:
The previous instructions resulted in a bootloader that wouldn't fit in
an MBR gap. I have updated the docs based on upstream's build process.
Signed-off-by: Baltazár Radics <[email protected]>
---
doc/board/amlogic/odroid-n2.rst | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/doc/board/amlogic/odroid-n2.rst b/doc/board/amlogic/odroid-n2.rst
index 883720f8fb..5222a21c80 100644
--- a/doc/board/amlogic/odroid-n2.rst
+++ b/doc/board/amlogic/odroid-n2.rst
@@ -54,10 +54,9 @@ image so it is necessary to obtain binaries from sources
published by the board
$ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
$ export
PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- $ DIR=odroid-n2
- $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b
odroidn2-v2015.01 $DIR
+ $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b
odroidg12-v2015.01 odroidg12
- $ cd odroid-n2
+ $ cd odroidg12
$ make odroidn2_defconfig
$ make
$ export UBOOTDIR=$PWD
@@ -74,12 +73,8 @@ Go back to the mainline U-Boot source tree then:
$ cp $UBOOTDIR/fip/g12b/bl2.bin fip/
$ cp $UBOOTDIR/fip/g12b/bl30.bin fip/
$ cp $UBOOTDIR/fip/g12b/bl31.img fip/
- $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
$ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
$ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
- $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
- $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
- $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
$ cp $UBOOTDIR/fip/g12b/piei.fw fip/
$ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
$ cp u-boot.bin fip/bl33.bin
@@ -113,7 +108,7 @@ Go back to the mainline U-Boot source tree then:
--level v3 --type bl31
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin
--compress lz4 \
--output fip/bl33.bin.enc \
- --level v3 --type bl33 --compress lz4
+ --level v3 --type bl33
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
--output fip/bl2.n.bin.sig
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
@@ -124,11 +119,7 @@ Go back to the mainline U-Boot source tree then:
--bl33 fip/bl33.bin.enc \
--ddrfw1 fip/ddr4_1d.fw \
--ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
--ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
--ddrfw8 fip/aml_ddr.fw \
--level v3
Reviewed-by: Neil Armstrong <[email protected]>
