i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Alice Guo <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Mathieu Othacehe <[email protected]> Cc: Mattijs Korpershoek <[email protected]> Cc: Peng Fan <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- drivers/usb/host/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 24786a2bc91..a656265890e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -217,14 +217,14 @@ config USB_EHCI_MX6 Enables support for the on-chip EHCI controller on i.MX6 SoCs. config USB_EHCI_MX7 - bool "Support for i.MX7 on-chip EHCI USB controller" - depends on ARCH_MX7 || IMX8M || IMX93 + bool "Support for i.MX7/i.MX8M/i.MX9 on-chip EHCI USB controller" + depends on ARCH_MX7 || IMX8M || IMX93 || IMX95 select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7 - select PHY if IMX8M || IMX93 - select NOP_PHY if IMX8M || IMX93 + select PHY if IMX8M || IMX93 || IMX95 + select NOP_PHY if IMX8M || IMX93 || IMX95 default y ---help--- - Enables support for the on-chip EHCI controller on i.MX7 SoCs. + Enables support for the on-chip EHCI controller on i.MX7/i.MX8M/i.MX9 SoCs. config USB_EHCI_MXS bool "Support for i.MX23/i.MX28 EHCI USB controller" -- 2.45.2
