If the regulator is already enabled, this happens if the regulator is set in regulator-always-on, regulator_set_enable() return -EALREADY.
Ignore the -EALREADY return since it's not an error. Suggested-by: Jonas Karlman <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> --- Changes in v2: - Switch to regulator_set_enable_if_allowed thanks to Jonas's suggestion - Link to v1: https://lore.kernel.org/r/20241008-u-boot-video-fix-hdmi-supply-already-on-v1-1-3a12c73ff...@linaro.org --- drivers/video/meson/meson_dw_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/meson/meson_dw_hdmi.c b/drivers/video/meson/meson_dw_hdmi.c index 587df7beb9b..1631dc38416 100644 --- a/drivers/video/meson/meson_dw_hdmi.c +++ b/drivers/video/meson/meson_dw_hdmi.c @@ -418,8 +418,8 @@ static int meson_dw_hdmi_probe(struct udevice *dev) } if (!ret) { - ret = regulator_set_enable(supply, true); - if (ret) + ret = regulator_set_enable_if_allowed(supply, true); + if (ret && ret != -ENOSYS) return ret; } #endif --- base-commit: 28dc47038edc4e93f32d75a357131bcf01a18d85 change-id: 20241008-u-boot-video-fix-hdmi-supply-already-on-e6a9af27b1eb Best regards, -- Neil Armstrong <[email protected]>
