Implement LED activity API similar to BOOT LED API. Usual activity might be a file transfer with TFTP, a flash write...
User of this API will call led_activity_on/off/blink() to signal these kind of activity. New Kconfig is implemented similar to BOOT LED, LED_ACTIVITY to enable support for it. It's introduced a new /options/u-boot property "activity-led" and "activity-led-period" to define the activity LED label and the default period when the activity LED is set to blink mode. If "activity-led-period" is not defined, the value of 250 (ms) is used by default. If CONFIG_LED_BLINK or CONFIG_LED_SW_BLINK is not enabled, led_boot_blink call will fallback to simple LED ON. Signed-off-by: Christian Marangi <[email protected]> --- drivers/led/Kconfig | 8 ++++ drivers/led/led-uclass.c | 94 ++++++++++++++++++++++++++++++++++++++-- include/led.h | 52 ++++++++++++++++++++++ 3 files changed, 151 insertions(+), 3 deletions(-) diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 6149cfa02b8..f0434f247a4 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -16,6 +16,14 @@ config LED_BOOT LED boot is a specific LED assigned to signal boot operation status. +config LED_ACTIVITY + bool "Enable LED activity support" + help + Enable LED activity support. + + LED activity is a specific LED assigned to signal activity operation + like file trasnfer, flash write/erase... + config LED_BCM6328 bool "LED Support for BCM6328" depends on LED && ARCH_BMIPS diff --git a/drivers/led/led-uclass.c b/drivers/led/led-uclass.c index c5b560982b0..c87fc7540c7 100644 --- a/drivers/led/led-uclass.c +++ b/drivers/led/led-uclass.c @@ -168,12 +168,86 @@ int led_boot_blink(void) #endif #endif +#ifdef CONFIG_LED_ACTIVITY +int led_activity_on(void) +{ + struct uclass *uc = uclass_find(UCLASS_LED); + struct led_uc_priv *priv; + struct udevice *dev; + + if (!uc) + return -ENOENT; + + priv = uclass_get_priv(uc); + if (!priv->activity_led_dev || + uclass_get_device_tail(priv->activity_led_dev, 0, &dev)) { + printf("Failed to get activity LED %s\n", + priv->activity_led_label); + return -EINVAL; + } + + return led_set_state(dev, LEDST_ON); +} + +int led_activity_off(void) +{ + struct uclass *uc = uclass_find(UCLASS_LED); + struct led_uc_priv *priv; + struct udevice *dev; + + if (!uc) + return -ENOENT; + + priv = uclass_get_priv(uc); + if (!priv->activity_led_dev || + uclass_get_device_tail(priv->activity_led_dev, 0, &dev)) { + printf("Failed to get activity LED %s\n", + priv->activity_led_label); + return -EINVAL; + } + + return led_set_state(dev, LEDST_OFF); +} + +#if defined(CONFIG_LED_BLINK) || defined(CONFIG_LED_SW_BLINK) +int led_activity_blink(void) +{ + struct uclass *uc = uclass_find(UCLASS_LED); + struct led_uc_priv *priv; + struct udevice *dev; + int ret; + + if (!uc) + return -ENOENT; + + priv = uclass_get_priv(uc); + if (!priv->activity_led_dev || + uclass_get_device_tail(priv->activity_led_dev, 0, &dev)) { + printf("Failed to get activity LED %s\n", + priv->activity_led_label); + return -EINVAL; + } + + ret = led_set_period(dev, priv->activity_led_period); + if (ret) { + if (ret != -ENOSYS) + return ret; + + /* fallback to ON with no set_period and no SW_BLINK */ + return led_set_state(dev, LEDST_ON); + } + + return led_set_state(dev, LEDST_BLINK); +} +#endif +#endif + static int led_post_bind(struct udevice *dev) { struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); const char *default_state; -#ifdef CONFIG_LED_BOOT +#if defined(CONFIG_LED_BOOT) || defined(CONFIG_LED_ACTIVITY) struct led_uc_priv *priv = uclass_get_priv(dev->uclass); #endif @@ -189,6 +263,12 @@ static int led_post_bind(struct udevice *dev) priv->boot_led_dev = dev; #endif +#ifdef CONFIG_LED_ACTIVITY + /* check if we are binding activity LED and assign it */ + if (!strcmp(priv->activity_led_label, uc_plat->label)) + priv->activity_led_dev = dev; +#endif + uc_plat->default_state = LEDST_COUNT; default_state = dev_read_string(dev, "default-state"); @@ -242,13 +322,21 @@ static int led_post_probe(struct udevice *dev) return ret; } -#ifdef CONFIG_LED_BOOT +#if defined(CONFIG_LED_BOOT) || defined(CONFIG_LED_ACTIVITY) static int led_init(struct uclass *uc) { struct led_uc_priv *priv = uclass_get_priv(uc); +#ifdef CONFIG_LED_BOOT priv->boot_led_label = ofnode_options_read_str("boot-led"); priv->boot_led_period = ofnode_options_read_int("boot-led-period", 250); +#endif + +#ifdef CONFIG_LED_ACTIVITY + priv->activity_led_label = ofnode_options_read_str("activity-led"); + priv->activity_led_period = ofnode_options_read_int("activity-led-period", + 250); +#endif return 0; } @@ -260,7 +348,7 @@ UCLASS_DRIVER(led) = { .per_device_plat_auto = sizeof(struct led_uc_plat), .post_bind = led_post_bind, .post_probe = led_post_probe, -#ifdef CONFIG_LED_BOOT +#if defined(CONFIG_LED_BOOT) || defined(CONFIG_LED_ACTIVITY) .init = led_init, .priv_auto = sizeof(struct led_uc_priv), #endif diff --git a/include/led.h b/include/led.h index ca495217777..bba8c0009ca 100644 --- a/include/led.h +++ b/include/led.h @@ -54,8 +54,11 @@ struct led_uc_plat { * struct led_uc_priv - Private data the uclass stores about each device * * @boot_led_label: Boot LED label + * @activity_led_label: Activity LED label * @boot_led_dev: Boot LED dev + * @activity_led_dev: Activity LED dev * @boot_led_period: Boot LED blink period + * @activity_led_period: Activity LED blink period */ struct led_uc_priv { #ifdef CONFIG_LED_BOOT @@ -63,6 +66,11 @@ struct led_uc_priv { struct udevice *boot_led_dev; int boot_led_period; #endif +#ifdef CONFIG_LED_ACTIVITY + const char *activity_led_label; + struct udevice *activity_led_dev; + int activity_led_period; +#endif }; struct led_ops { @@ -193,4 +201,48 @@ static inline int led_boot_blink(void) } #endif +#ifdef CONFIG_LED_ACTIVITY + +/** + * led_activity_on() - turn ON the designated LED for activity + * + * Return: 0 if OK, -ve on error + */ +int led_activity_on(void); + +/** + * led_activity_off() - turn OFF the designated LED for activity + * + * Return: 0 if OK, -ve on error + */ +int led_activity_off(void); + +#if defined(CONFIG_LED_BLINK) || defined(CONFIG_LED_SW_BLINK) +/** + * led_activity_blink() - turn ON the designated LED for activity + * + * Return: 0 if OK, -ve on error + */ +int led_activity_blink(void); +#else +/* If LED BLINK is not supported/enabled, fallback to LED ON */ +#define led_activity_blink led_activity_on +#endif +#else +static inline int led_activity_on(void) +{ + return -ENOSYS; +} + +static inline int led_activity_off(void) +{ + return -ENOSYS; +} + +static inline int led_activity_blink(void) +{ + return -ENOSYS; +} +#endif + #endif -- 2.45.2
