Hi Fabio,
On 27.08.24 02:58, Fabio Estevam wrote:
From: Fabio Estevam <[email protected]>
'#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)' can
be removed from mx5/mx6/mx7/mx8m board config files as it is the
default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c.
Suggested-by: Tim Harvey <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
---
include/configs/apalis_imx6.h | 1 -
include/configs/aristainetos2.h | 1 -
include/configs/brppt2.h | 1 -
include/configs/cl-som-imx7.h | 1 -
include/configs/cm_fx6.h | 1 -
include/configs/colibri-imx6ull.h | 1 -
include/configs/colibri_imx6.h | 1 -
include/configs/colibri_imx7.h | 1 -
include/configs/dart_6ul.h | 1 -
include/configs/dh_imx6.h | 1 -
include/configs/display5.h | 1 -
include/configs/embestmx6boards.h | 1 -
include/configs/ge_b1x5v2.h | 1 -
include/configs/gw_ventana.h | 1 -
include/configs/imx6_logic.h | 1 -
include/configs/imx6dl-mamoj.h | 1 -
include/configs/imx6q-bosch-acc.h | 1 -
include/configs/imx7-cm.h | 1 -
include/configs/imx8mm-cl-iot-gate.h | 1 -
include/configs/kontron-sl-mx6ul.h | 1 -
include/configs/kontron-sl-mx8mm.h | 1 -
include/configs/kp_imx53.h | 1 -
include/configs/kp_imx6q_tpc.h | 1 -
include/configs/liteboard.h | 1 -
include/configs/m53menlo.h | 1 -
include/configs/meerkat96.h | 1 -
include/configs/mx53cx9020.h | 1 -
include/configs/mx53loco.h | 1 -
include/configs/mx53ppd.h | 1 -
include/configs/mx6cuboxi.h | 1 -
include/configs/mx6memcal.h | 1 -
include/configs/mx6sabreauto.h | 1 -
include/configs/mx6sabresd.h | 1 -
include/configs/mx6slevk.h | 1 -
include/configs/mx6sllevk.h | 1 -
include/configs/mx6sxsabreauto.h | 1 -
include/configs/mx6sxsabresd.h | 1 -
include/configs/mx6ul_14x14_evk.h | 1 -
include/configs/mx7dsabresd.h | 1 -
include/configs/mx7ulp_com.h | 1 -
include/configs/mys_6ulx.h | 1 -
include/configs/nitrogen6x.h | 1 -
include/configs/novena.h | 1 -
include/configs/npi_imx6ull.h | 1 -
include/configs/o4-imx6ull-nano.h | 1 -
include/configs/opos6uldev.h | 1 -
include/configs/pcl063.h | 1 -
include/configs/pcl063_ull.h | 1 -
include/configs/pico-imx6.h | 1 -
include/configs/pico-imx6ul.h | 1 -
include/configs/pico-imx7d.h | 1 -
include/configs/somlabs_visionsom_6ull.h | 1 -
include/configs/tbs2910.h | 1 -
include/configs/tqma6.h | 1 -
include/configs/usbarmory.h | 1 -
include/configs/verdin-imx8mm.h | 1 -
include/configs/vining_2000.h | 1 -
include/configs/wandboard.h | 1 -
include/configs/warp7.h | 1 -
include/configs/xpress.h | 1 -
60 files changed, 60 deletions(-)
[...]
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 256331ae1733..eb5fdae0ea86 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -27,7 +27,6 @@
/* USB */
#ifdef CONFIG_CMD_USB
-#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* CONFIG_CMD_USB */
#define CFG_EXTRA_ENV_SETTINGS \
Can you please also remove the now useless comment and empty #ifdef
block!?
I have not checked in detail, but the same occurs also for other boards
in this patch.
Thanks,
Soeren
