Hello Fabio, Tom,
On 13.08.24 14:27, Fabio Estevam wrote:
Hi Heiko,
On Wed, Aug 7, 2024 at 12:53 PM Heiko Schocher <[email protected]> wrote:
U-Boot 2024.07 drops on aristainetos2 board the following
warning:
Failed to enable per_clk
and bootlogo is not seen on LVDS display.
This patch uses old behaviour for systems without clock framework
if CONFIG_CLK is not enabled.
Fixes: bfc778cb93a3 ("driver: pwm: pwm-imx: get and enable per/ipg clock using
dm")
Signed-off-by: Heiko Schocher <[email protected]>
---
Changes in v2:
use CONFIG_IS_ENABLED instead of IS_ENABLED
as Anatolij suggested.
This causes build failures:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/887503
Please fix and resend.
Hmm... yes ... I work/worked on aristainetos2 board update for 2024.07
(or later) ... and saw this
Failed to enable per_clk
warning when 2024.07 boots ... and bootlogo did not work anymore, as
backlight is pwm driven on this hardware...
I bet, for all the boards which fail in the azure run with this patch,
PWM do not work anymore... because CONFIG_CLK is not enabled for them!
I am really unhappy, that I have no automated U-Boot runtime tests anymore
running on real hardware... setup with tbot was very easy, but had no
time for looking at the bugs poping up...
Hmm... looking in git history, there comes this commit in my eyes:
commit 4eea76574062e9079b6a267229962d6ec0be910a
Author: Tom Rini <[email protected]>
Date: Sat Nov 19 18:45:18 2022 -0500
pwm: imx: Remove unused references to CONFIG_IMX6_PWM_PER_CLK
On platforms that use DM_PWM, we do not need to define this value
anymore, so remove it from config files.
Signed-off-by: Tom Rini <[email protected]>
which exactly removes for all breaking boards this define...
Should we revert this patch?
I just can say for the aristianetos2 board, that I readded exactly this
define in my work for the port to currentmainline ... and with my patch,
pwm and so bootlogo works again ...
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: [email protected]
