This series enables Ethernet Boot on SK-AM62 device. This series is based on commit 'f4f845b85926' of origin/next branch of U-Boot.
Link to v4: https://lore.kernel.org/r/[email protected]/ Logs for Ethernet Boot for AM625-SK: https://gist.github.com/chintanv133/07bcb1473301581aab6d4e951d9c6572 Changes from v4 to v5: - Updated [PATCH v4 10/10] with the cherry picked patch from devicetree-rabasing repo as pointed out by Sumit. Chintan Vankar (2): common: spl: spl: Init DRAM size in R5/A53 SPL arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node Kishon Vijay Abraham I (6): firmware: ti_sci: Add No-OP for "RX_FL_CFG" soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers dma: ti: k3-udma: Add support for native configuration of chan/flow arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS configs: am62: Add configs for enabling ETHBOOT in R5SPL configs: am62: Enable configs required for Ethboot Siddharth Vadapalli (1): arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma Vignesh Raghavendra (1): soc: ti: k3-navss-ringacc: Fix reset ring API arch/arm/dts/k3-am625-r5-sk.dts | 5 ++++ arch/arm/mach-k3/am62x/am625_init.c | 10 ++++++++ common/spl/spl.c | 2 +- configs/am62x_evm_a53_ethboot_defconfig | 17 +++++++++++++ configs/am62x_evm_r5_ethboot_defconfig | 25 +++++++++++++++++++ drivers/dma/ti/k3-udma.c | 6 +++++ drivers/firmware/ti_sci.c | 8 +++++- drivers/soc/ti/k3-navss-ringacc-u-boot.c | 9 ++++++- drivers/soc/ti/k3-navss-ringacc.c | 17 ++++++++++++- .../src/arm64/ti/k3-am62x-sk-common.dtsi | 4 +++ 10 files changed, 99 insertions(+), 4 deletions(-) create mode 100644 configs/am62x_evm_a53_ethboot_defconfig create mode 100644 configs/am62x_evm_r5_ethboot_defconfig -- 2.34.1
