The TS433 seems to use a silergy,syr827 regulator for the cpu supply. At least that is the compatible used in the vendor devicetree, though it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the cpu cores. Tested-by: Uwe Kleine-König <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] [this needs to be replaced, once the patch hits the devicetree-rebasing repo] Signed-off-by: Heiko Stuebner <[email protected]> --- .../src/arm64/rockchip/rk3568-qnap-ts433.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index 9f964b6f411..4bccefc0537 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -130,6 +130,16 @@ vin-supply = <&vcc5v0_usb>; }; + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vcc5v0_usb: regulator-vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -156,6 +166,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -175,12 +201,27 @@ }; &i2c0 { + status = "okay"; + pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + }; }; &i2c1 { -- 2.39.2
