Hi Heiko,
On 2024-07-31 12:26, Heiko Stuebner wrote:
The Rock 5 ITX is board in ITX form factor using the RK358 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
-https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
-https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
The naming scheme with the dashes follows Dragan's comment on the mainline
devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is
fine, but it should be "rock-5-itx", simply because there's a space
between "5" and "ITX" in "ROCK 5 ITX"
Signed-off-by: Heiko Stuebner<[email protected]>
---
arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi | 18 ++++
arch/arm/mach-rockchip/rk3588/Kconfig | 29 ++++++
board/radxa/rock-5-itx-rk3588/Kconfig | 12 +++
board/radxa/rock-5-itx-rk3588/MAINTAINERS | 7 ++
configs/rock-5-itx-rk3588_defconfig | 104 +++++++++++++++++++++
include/configs/rock-5-itx-rk3588.h | 15 +++
6 files changed, 185 insertions(+)
create mode 100644 arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
create mode 100644 board/radxa/rock-5-itx-rk3588/Kconfig
create mode 100644 board/radxa/rock-5-itx-rk3588/MAINTAINERS
create mode 100644 configs/rock-5-itx-rk3588_defconfig
create mode 100644 include/configs/rock-5-itx-rk3588.h
Please also add this board to the rk3588 list in rockchip.rst.
diff --git a/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
b/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
new file mode 100644
index 00000000000..c94df088af5
--- /dev/null
+++ b/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ */
+
+#include "rk3588-u-boot.dtsi"
+
+&fspim2_pins {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
Running "pci enum" without anything in the M.2 M-key slot my board
freeze at pcie@fe160000, leaving the mkey regulator always-on seem to
work around this:
&vcc3v3_mkey {
regulator-always-on;
};
diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig
b/arch/arm/mach-rockchip/rk3588/Kconfig
index e751d64e1a1..0dcf2249fb4 100644
--- a/arch/arm/mach-rockchip/rk3588/Kconfig
+++ b/arch/arm/mach-rockchip/rk3588/Kconfig
@@ -185,6 +185,34 @@ config TARGET_ROCK5B_RK3588
USB PD over USB Type-C
Size: 100mm x 72mm (Pico-ITX form factor)
+config TARGET_ROCK_5_ITX_RK3588
+ bool "Radxa ROCK-5-ITX RK3588 board"
+ select BOARD_LATE_INIT
+ help
+ Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board
+ Computer) by Radxa in the ITX formfactor.
+
+ There are variants depending on the DRAM size : from 4G up to 32G.
+
+ Specification:
+
+ Rockchip Rk3588 SoC
+ 4x ARM Cortex-A76, 4x ARM Cortex-A55
+ 4/8/16/24/32GB memory LPDDR5
+ Mali G610MC4 GPU
+ 2x MIPI CSI 2 multiple lanes connector
+ eMMC
+ uSD slot (up to 128GB)
+ M.2 M-key and M.2 E-key connector
+ 4x SATA
+ 2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C
+ 2x HDMI 2.1 output, 1x HDMI input
+ DP via Type-C
+ 2x DSI via PCB connector
+ 2x 2.5 Gbps Ethernet port
+ Front-panel connectors for audio and case-power, -leds
+ Powered by either 12V, ATX power-supply or PoE
+
config TARGET_SIGE7_RK3588
bool "ArmSoM Sige7 RK3588 board"
select BOARD_LATE_INIT
@@ -319,6 +347,7 @@ source "board/pine64/quartzpro64-rk3588/Kconfig"
source "board/turing/turing-rk1-rk3588/Kconfig"
source "board/radxa/rock5a-rk3588s/Kconfig"
source "board/radxa/rock5b-rk3588/Kconfig"
+source "board/radxa/rock-5-itx-rk3588/Kconfig"
source "board/rockchip/evb_rk3588/Kconfig"
source "board/rockchip/toybrick_rk3588/Kconfig"
source "board/theobroma-systems/jaguar_rk3588/Kconfig"
diff --git a/board/radxa/rock-5-itx-rk3588/Kconfig
b/board/radxa/rock-5-itx-rk3588/Kconfig
new file mode 100644
index 00000000000..f7a7666d531
--- /dev/null
+++ b/board/radxa/rock-5-itx-rk3588/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_ITX_RK3588
+
+config SYS_BOARD
+ default "rock-5-itx-rk3588"
+
+config SYS_VENDOR
+ default "radxa"
+
+config SYS_CONFIG_NAME
+ default "rock-5-itx-rk3588"
+
+endif
diff --git a/board/radxa/rock-5-itx-rk3588/MAINTAINERS
b/board/radxa/rock-5-itx-rk3588/MAINTAINERS
new file mode 100644
index 00000000000..297b0676ddf
--- /dev/null
+++ b/board/radxa/rock-5-itx-rk3588/MAINTAINERS
@@ -0,0 +1,7 @@
+ROCK-5-ITX-RK3588
+M: Heiko Stuebner<[email protected]>
Feel free to add me as a reviewer of this board:
R: Jonas Karlman<[email protected]>
+S: Maintained
+F: board/radxa/rock-5-itx-rk3588
+F: include/configs/rock-5-itx-rk3588.h
+F: configs/rock-5-itx-rk3588_defconfig
+F: arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
diff --git a/configs/rock-5-itx-rk3588_defconfig
b/configs/rock-5-itx-rk3588_defconfig
new file mode 100644
index 00000000000..2a41642245b
--- /dev/null
+++ b/configs/rock-5-itx-rk3588_defconfig
@@ -0,0 +1,104 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-rock-5-itx"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK5B_RK3588=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5-itx.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
Suggest you also add support for the UMS cmd:
CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
Suggest you add following:
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Still not fully sure what this option really affect but have started
adding it to new boards to closer match older rk33xx boards:
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_AHCI_PCI=y
+CONFIG_DWC_AHCI=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
If we want to control the leds in U-Boot:
CONFIG_LED=y
CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=5
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHYLIB=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
The rk8xx driver support the PMIC used on this board,
suggest you add following:
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
The PMIC use SPI:
CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_GENERIC=y
This can probably be dropped, there is no usb node included in SPL FDT
when I check with "dtc -I dtb -O dts spl/u-boot-spl.dtb".
Tested following feature on my v1.11 board:
- SD-card boot
- eMMC boot
- SPI flash boot
- PCIe/NVMe/AHCI
- USB gadget
- USB host
I did notice some issue with usb host trying to start/stop multiple
times. First start after a reset seem to work however after a "usb stop"
it is not fully possible to re-enable and have working usb.
Do not think this is specific to this board so nothing blocking.
Regards,
Jonas
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_LAN75XX=y
+CONFIG_USB_ETHER_LAN78XX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/rock-5-itx-rk3588.h
b/include/configs/rock-5-itx-rk3588.h
new file mode 100644
index 00000000000..bc0f9e72bc5
--- /dev/null
+++ b/include/configs/rock-5-itx-rk3588.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024 Heiko Stuebner<[email protected]>
+ */
+
+#ifndef __ROCK_5_ITX_RK3588_H
+#define __ROCK_5_ITX_RK3588_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __ROCK_5_ITX_RK3588_H */
