Hi Quentin,
On 2024/6/14 19:04, Quentin Schulz wrote:
From: Quentin Schulz <[email protected]>
USB gadget simply doesn't work right now on PX30. Tested on PX30 EVB and
PX30 Ringneck with Linux mainline and Rockchip 5.10 Linux as well as
U-Boot.
Do you mean for both U-Boot and kernel, including mainline version and
rockchip version,
and on both PX30 EVB and Ringneck board, all SW&HW have no USB gadget
working?
So when you test this, does the maskrom mode works? because it sounds
like maybe
the HOST PC is the one have issue at the moment.
Thanks,
- Kever
We don't want to our users to assume that USB gadget is supported on Q7
USB P1 on Ringneck Haikou, so let's remove its support, which also
removes the ums CLI command, fastboot and Android image booting
support.
Signed-off-by: Quentin Schulz <[email protected]>
---
configs/ringneck-px30_defconfig | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig
index 23204794205..2ec5f72e47a 100644
--- a/configs/ringneck-px30_defconfig
+++ b/configs/ringneck-px30_defconfig
@@ -15,7 +15,6 @@ CONFIG_DEBUG_UART_BASE=0xFF030000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y
-# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
@@ -42,6 +41,7 @@ CONFIG_SPL_ATF=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_BIND=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -49,7 +49,6 @@ CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
@@ -73,8 +72,6 @@ CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
-CONFIG_FASTBOOT_BUF_ADDR=0x800800
-CONFIG_FASTBOOT_BUF_SIZE=0x04000000
CONFIG_GPIO_HOG=y
CONFIG_SPL_GPIO_HOG=y
CONFIG_ROCKCHIP_GPIO=y
@@ -112,8 +109,6 @@ CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y
CONFIG_LZO=y
