On 7/14/24 17:08, Kongyang Liu wrote:
Add basic support for SpacemiT's Banana Pi F3 boardSigned-off-by: Kongyang Liu <[email protected]> --- arch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 39 +++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 20 ++ arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++ board/spacemit/bananapi_f3/Kconfig | 25 ++ board/spacemit/bananapi_f3/MAINTAINERS | 6 + board/spacemit/bananapi_f3/Makefile | 5 + board/spacemit/bananapi_f3/board.c | 9 + configs/bananapi_f3_defconfig | 20 ++ include/configs/bananapi_f3.h | 15 + 14 files changed, 553 insertions(+) create mode 100644 arch/riscv/cpu/k1/Kconfig create mode 100644 arch/riscv/cpu/k1/Makefile create mode 100644 arch/riscv/cpu/k1/cpu.c create mode 100644 arch/riscv/cpu/k1/dram.c create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts create mode 100644 arch/riscv/dts/k1.dtsi create mode 100644 board/spacemit/bananapi_f3/Kconfig create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS create mode 100644 board/spacemit/bananapi_f3/Makefile create mode 100644 board/spacemit/bananapi_f3/board.c create mode 100644 configs/bananapi_f3_defconfig create mode 100644 include/configs/bananapi_f3.h diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index fa3b016c52..211f19a585 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -11,6 +11,9 @@ choice config TARGET_ANDES_AE350 bool "Support Andes ae350" +config TARGET_BANANAPI_F3 + bool "Support BananaPi F3 Board" + config TARGET_MICROCHIP_ICICLE bool "Support Microchip PolarFire-SoC Icicle Board" @@ -88,6 +91,7 @@ source "board/sifive/unleashed/Kconfig" source "board/sifive/unmatched/Kconfig" source "board/sipeed/maix/Kconfig" source "board/sophgo/milkv_duo/Kconfig" +source "board/spacemit/bananapi_f3/Kconfig" source "board/starfive/visionfive2/Kconfig" source "board/thead/th1520_lpi4a/Kconfig" source "board/xilinx/mbv/Kconfig" @@ -99,6 +103,7 @@ source "arch/riscv/cpu/fu540/Kconfig" source "arch/riscv/cpu/fu740/Kconfig" source "arch/riscv/cpu/generic/Kconfig" source "arch/riscv/cpu/jh7110/Kconfig" +source "arch/riscv/cpu/k1/Kconfig" # architecture-specific options below diff --git a/arch/riscv/cpu/k1/Kconfig b/arch/riscv/cpu/k1/Kconfig new file mode 100644 index 0000000000..79c9fefb66 --- /dev/null +++ b/arch/riscv/cpu/k1/Kconfig @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2024, Kongyang Liu <[email protected]> + +config SPACEMIT_K1 + bool + select BINMAN + select ARCH_EARLY_INIT_R + select SYS_CACHE_SHIFT_6 + imply CPU + imply CPU_RISCV + imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE) + imply RISCV_ACLINT if RISCV_MMODE + imply SPL_RISCV_ACLINT if SPL_RISCV_MMODE + imply CMD_CPU + imply SPL_CPU + imply SPL_OPENSBI + imply SPL_LOAD_FIT diff --git a/arch/riscv/cpu/k1/Makefile b/arch/riscv/cpu/k1/Makefile new file mode 100644 index 0000000000..da12e0f64e --- /dev/null +++ b/arch/riscv/cpu/k1/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y += dram.o +obj-y += cpu.o diff --git a/arch/riscv/cpu/k1/cpu.c b/arch/riscv/cpu/k1/cpu.c new file mode 100644 index 0000000000..233a6a3d64 --- /dev/null +++ b/arch/riscv/cpu/k1/cpu.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+
Thanks a lot for adding the board. GPL-2.0-or-later, see https://spdx.org/licenses/GPL-2.0-or-later.html
+/* + * Copyright (c) 2024, Kongyang Liu <[email protected]> + */ + +int cleanup_before_linux(void) +{ + return 0; +} diff --git a/arch/riscv/cpu/k1/dram.c b/arch/riscv/cpu/k1/dram.c new file mode 100644 index 0000000000..41a596eef4 --- /dev/null +++ b/arch/riscv/cpu/k1/dram.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+
ditto
+/* + * Copyright (c) 2024, Kongyang Liu <[email protected]> + */ + +#include <asm/global_data.h> +#include <config.h> +#include <linux/sizes.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_base = CFG_SYS_SDRAM_BASE; + /* TODO get ram size from ddr controller */ + gd->ram_size = SZ_4G; + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = min_t(phys_size_t, gd->ram_size, SZ_2G); + + if (gd->ram_size > SZ_2G && CONFIG_NR_DRAM_BANKS > 1) { + gd->bd->bi_dram[1].start = 0x100000000; + gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G; + } + + return 0; +} + +phys_addr_t board_get_usable_ram_top(phys_size_t total_size) +{ + if (gd->ram_size > SZ_2G) + return SZ_2G; + + return gd->ram_size; +} diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index 17cda483e1..71267f96f8 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ dtb-$(CONFIG_TARGET_ANDES_AE350) += ae350_32.dtb ae350_64.dtb +dtb-$(CONFIG_TARGET_BANANAPI_F3) += k1-bananapi-f3.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_TARGET_MILKV_DUO) += cv1800b-milkv-duo.dtb dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtb diff --git a/arch/riscv/dts/k1-bananapi-f3.dts b/arch/riscv/dts/k1-bananapi-f3.dts new file mode 100644 index 0000000000..542049d9d3 --- /dev/null +++ b/arch/riscv/dts/k1-bananapi-f3.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 Yangyu Chen <[email protected]> + */ + +#include "k1.dtsi" +#include "binman.dtsi" + +/ { + model = "Banana Pi BPI-F3"; + compatible = "bananapi,bpi-f3", "spacemit,k1"; + + chosen { + stdout-path = "serial0"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/riscv/dts/k1.dtsi b/arch/riscv/dts/k1.dtsi new file mode 100644 index 0000000000..b301f45fd5 --- /dev/null +++ b/arch/riscv/dts/k1.dtsi @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT
Elsewhere you use GPL-2.0-or-later. Any special reason to be more restrictive here?
+/* + * Copyright (C) 2024 Yangyu Chen <[email protected]> + */ + +/dts-v1/; +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SpacemiT K1"; + compatible = "spacemit,k1";
According to the devicetree specification "a memory device node is required for all devicetrees".
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <24000000>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_0>;
+ };
+ core1 {
+ cpu = <&cpu_1>;
+ };
+ core2 {
+ cpu = <&cpu_2>;
+ };
+ core3 {
+ cpu = <&cpu_3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_4>;
+ };
+ core1 {
+ cpu = <&cpu_5>;
+ };
+ core2 {
+ cpu = <&cpu_6>;
+ };
+ core3 {
+ cpu = <&cpu_7>;
+ };
+ };
+ };
+
+ cpu_0: cpu@0 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_1: cpu@1 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <1>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_2: cpu@2 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <2>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_3: cpu@3 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <3>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_4: cpu@4 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <4>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_5: cpu@5 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <5>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu5_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_6: cpu@6 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <6>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu6_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_7: cpu@7 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <7>;
+ riscv,isa =
"rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v",
"zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond",
"zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh",
"zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh",
"zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot",
"svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu7_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-noncoherent;
+ ranges;
+
+ uart0: serial@d4017000 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017000 0x0 0x100>;
+ interrupts = <42>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@d4017100 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017100 0x0 0x100>;
+ interrupts = <44>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@d4017200 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017200 0x0 0x100>;
+ interrupts = <45>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@d4017300 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017300 0x0 0x100>;
+ interrupts = <46>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@d4017400 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017400 0x0 0x100>;
+ interrupts = <47>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart6: serial@d4017500 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017500 0x0 0x100>;
+ interrupts = <48>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart7: serial@d4017600 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017600 0x0 0x100>;
+ interrupts = <49>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart8: serial@d4017700 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017700 0x0 0x100>;
+ interrupts = <50>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart9: serial@d4017800 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017800 0x0 0x100>;
+ interrupts = <51>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@e0000000 {
+ compatible = "spacemit,k1-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xe0000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>,
+ <&cpu5_intc 11>, <&cpu5_intc 9>,
+ <&cpu6_intc 11>, <&cpu6_intc 9>,
+ <&cpu7_intc 11>, <&cpu7_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ riscv,ndev = <159>;
+ };
+
+ clint: timer@e4000000 {
+ compatible = "spacemit,k1-clint", "sifive,clint0";
+ reg = <0x0 0xe4000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>,
+ <&cpu5_intc 3>, <&cpu5_intc 7>,
+ <&cpu6_intc 3>, <&cpu6_intc 7>,
+ <&cpu7_intc 3>, <&cpu7_intc 7>;
+ };
+ };
+};
diff --git a/board/spacemit/bananapi_f3/Kconfig
b/board/spacemit/bananapi_f3/Kconfig
new file mode 100644
index 0000000000..0082a0d2af
--- /dev/null
+++ b/board/spacemit/bananapi_f3/Kconfig
@@ -0,0 +1,25 @@
+if TARGET_BANANAPI_F3
+
+config SYS_BOARD
+ default "bananapi_f3"
+
+config SYS_VENDOR
+ default "spacemit"
+
+config SYS_CPU
+ default "k1"
+
+config SYS_CONFIG_NAME
+ default "bananapi_f3"
+
+config TEXT_BASE
+ default 0x00200000
+
+config SPL_OPENSBI_LOAD_ADDR
+ default 0x00000000
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select SPACEMIT_K1
+
+endif
diff --git a/board/spacemit/bananapi_f3/MAINTAINERS
b/board/spacemit/bananapi_f3/MAINTAINERS
new file mode 100644
index 0000000000..fc0f8487e6
--- /dev/null
+++ b/board/spacemit/bananapi_f3/MAINTAINERS
@@ -0,0 +1,6 @@
+BananaPi F3
+M: Kongyang Liu <[email protected]>
+S: Maintained
+F: board/spacemit/bananapi_f3/
+F: configs/bananapi_f3_defconfig
+F: doc/board/spacemit/bananapi_f3.rst
diff --git a/board/spacemit/bananapi_f3/Makefile
b/board/spacemit/bananapi_f3/Makefile
new file mode 100644
index 0000000000..a087013f5c
--- /dev/null
+++ b/board/spacemit/bananapi_f3/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
GPL-2.0-or-later See https://spdx.org/licenses/GPL-2.0-or-later.html
+# +# Copyright (c) 2024, Kongyang Liu <[email protected]> + +obj-y := board.o diff --git a/board/spacemit/bananapi_f3/board.c b/board/spacemit/bananapi_f3/board.c new file mode 100644 index 0000000000..eaa47be173 --- /dev/null +++ b/board/spacemit/bananapi_f3/board.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+
ditto
+/* + * Copyright (c) 2024, Kongyang Liu <[email protected]> + */ + +int board_init(void) +{ + return 0; +} diff --git a/configs/bananapi_f3_defconfig b/configs/bananapi_f3_defconfig new file mode 100644 index 0000000000..ce197d60bd --- /dev/null +++ b/configs/bananapi_f3_defconfig @@ -0,0 +1,20 @@ +CONFIG_RISCV=y +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000 +CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3"
The vendor SPL probably passes a device-tree to OpenSBI. The BananaPi BPI-F3 is sold with different RAM sizes. SPL might already have determined the size and added the information to the device-tree. Could we use that device-tree with CONFIG_OF_BOARD? We also need the memory reservation added by OpenSBI.
+CONFIG_SYS_LOAD_ADDR=0x200000 +CONFIG_TARGET_BANANAPI_F3=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0xa000000 +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="bananapi_f3# "
Can we use the default prompt, please. This will make it easier to support nearly identical boards in future. Best regards Heinrich
+CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=y diff --git a/include/configs/bananapi_f3.h b/include/configs/bananapi_f3.h new file mode 100644 index 0000000000..872c2014a4 --- /dev/null +++ b/include/configs/bananapi_f3.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2024, Kongyang Liu <[email protected]> + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/serial_reg.h> + +#define CFG_SYS_SDRAM_BASE 0x0 +#define CFG_SYS_NS16550_IER UART_IER_UUE + +#endif /* __CONFIG_H */
