Hi Tom, On Thu, Jul 11, 2024 at 3:46 PM Tom Rini <[email protected]> wrote: > > On Thu, Jul 11, 2024 at 01:31:34PM -0700, Tony Dinh wrote: > > Hi Tom, > > > > I'm trying to move some envs from a board header file to the default > > env file. I recall that the envs in CONFIG_DEFAULT_ENV_FILE are > > appended to the envs in CFG_EXTRA_ENV_SETTINGS. As you mentioned here > > before: > > > > https://lore.kernel.org/all/20220810170439.GJ1146598@bill-the-cat/ > > > > But it looks like envs in CFG_EXTRA_ENV_SETTINGS are completely > > erased, and then the envs are populated with what's in > > CONFIG_DEFAULT_ENV_FILE. > > > > Did I understand the usage correctly? > > Can you please post your I assume non-functioning-correctly patch? For > example, dragonboard410c has both > board/qualcomm/dragonboard410c/dragonboard410c.env and sets "#define > CFG_EXTRA_ENV_SETTINGS BOOTENV" in > include/configs/dragonboard410c.h > Here is the patch. Note that this patch depends on a previous patch (irrelevant to this test): https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
diff --git a/board/Synology/ds414/ds414.env b/board/Synology/ds414/ds414.env new file mode 100644 index 0000000000..03875e4e93 --- /dev/null +++ b/board/Synology/ds414/ds414.env @@ -0,0 +1,3 @@ +# Boot to original firmware if bootstd failed +# +bootcmd=bootflow scan -lb; run bootcmd_legacy diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index 6391c43474..9dd07f01c9 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -55,6 +55,8 @@ CONFIG_CMD_UBI=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_DEFAULT_ENV_FILE="board/Synology/ds414/ds414.env" CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 CONFIG_NET_RANDOM_ETHADDR=y Now, I kwboot the newly built u-boot. In the serial console, I set the envs to default expecting only the bootcmd is replaced. But all other envs that were in CFG_EXTRA_ENV_SETTINGS got erased. DS414> ver U-Boot 2024.07-tld-1-g2b2b95c77b37-dirty (Jul 11 2024 - 17:10:09 -0700) Synology DS214+/DS414 2/4-Bay Diskstation DS414> env def -a ## Resetting to default environment DS414> printenv bootcmd=bootflow scan -lb; run bootcmd_legacy Environment size: 47/65532 bytes DS414> All the best, Tony > -- > Tom

