From: Jean-Michel CASAUBON <[email protected]> Remove a stray semicolon in MCR3000 board environment.
Signed-off-by: Jean-Michel CASAUBON <[email protected]> Reviewed-by: DUBOIS Hugo <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> --- board/cssi/mcr3000/mcr3000.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/cssi/mcr3000/mcr3000.env b/board/cssi/mcr3000/mcr3000.env index 372ab09094..380c10c4ce 100644 --- a/board/cssi/mcr3000/mcr3000.env +++ b/board/cssi/mcr3000/mcr3000.env @@ -8,7 +8,7 @@ dhcp_ip=ip=:::::eth0:dhcp console_args=console=ttyCPM0,115200N8 loadkernel=ubi part nand0;ubifsmount ubi0;ubifsload ${loadaddr} /boot/${filename};ubifsumount; ubi detach bootcmd=run flashboot -flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off;${ofl_args}; run loadkernel; bootm ${loadaddr} +flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off ${ofl_args}; run loadkernel; bootm ${loadaddr} tftpboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off ${ofl_args}; tftp ${loadaddr} ${filename}; bootm ${loadaddr} dhcpboot=dhcp ${loadaddr} ${filename};setenv bootargs ${console_args} ${dhcp_ip} ${ofl_args}; bootm ${loadaddr} update=echo 'Updating ubi image'; if tftp 0x2000 $ubifile; then nand erase.chip; nand write 0x2000 0x00 $filesize; fi -- 2.43.0
