I don't get this bug.
I have at least 1 snapshot going on my "/home" partition all the time.
The VG that /home is in contains most of my partitions (26), with
2 more partitions on a separate (VG+PD's) VG.
Now, I've noticed when I am booting, it *does* take a bit of time to mount
bring up and mount all of the lvs, but you can the root mount is NOT
in an VG/LV -- It's on a "regular device" (numbers on left are w/kernel time
printing turned on -- so they are in seconds after boot):
[ 4.207621] XFS (sdc1): Mounting V4 Filesystem
[ 4.278746] XFS (sdc1): Starting recovery (logdev: internal)
[ 4.370757] XFS (sdc1): Ending recovery (logdev: internal)
[ 4.379839] VFS: Mounted root (xfs filesystem) on device 8:33.
..
[ 4.449462] devtmpfs: mounted
... last msg before my "long pause" where pretty much everything
get activated:
[ 4.591580] input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/0003:413C:2003.0002/input/input4
[ 4.604588] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10
Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-3.2/input0
[ 19.331731] showconsole (170) used greatest stack depth: 13080 bytes left
[ 19.412411] XFS (sdc6): Mounting V4 Filesystem
[ 19.505374] XFS (sdc6): Ending clean mount
.... more mostly unrelated messages... then you start seeing "dm's" mixed in
with the mounting messages -- just before kernel logging stops:
[ 22.205351] XFS (sdc2): Mounting V4 Filesystem
[ 22.205557] XFS (sdc3): Mounting V4 Filesystem
[ 22.216414] XFS (dm-5): Mounting V4 Filesystem
[ 22.217893] XFS (dm-6): Mounting V4 Filesystem
[ 22.237345] XFS (dm-1): Mounting V4 Filesystem
[ 22.245201] XFS (dm-8): Mounting V4 Filesystem
[ 22.267971] XFS (dm-13): Mounting V4 Filesystem
[ 22.293152] XFS (dm-15): Mounting V4 Filesystem
[ 22.299737] XFS (sdc8): Mounting V4 Filesystem
[ 22.340692] XFS (sdc2): Ending clean mount
[ 22.373169] XFS (sdc3): Ending clean mount
[ 22.401381] XFS (dm-5): Ending clean mount
[ 22.463974] XFS (dm-13): Ending clean mount
[ 22.474813] XFS (dm-1): Ending clean mount
[ 22.494807] XFS (dm-8): Ending clean mount
[ 22.505380] XFS (sdc8): Ending clean mount
[ 22.544059] XFS (dm-15): Ending clean mount
[ 22.557865] XFS (dm-6): Ending clean mount
[ 22.836244] Adding 8393924k swap on /dev/sdc5. Priority:-1 extents:1
across:8393924k FS
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
-----
A couple of things different about my setup from the 'norm' --
1) since my distro(openSuSE) jumped to systemd, (and I haven't), I had to write
some
rc scripts to help bring up the system.
2) one reason for this was my "/usr" partition is separate from root and
my distro decided to move many libs/bins ->usr and leave symlinks on the
root device to the programs in /usr. One of those was 'mount' (and its
associated libs).
That meant that once the rootfs was booted I had no way to mount /usr, where
most
of the binaries are (I asked why they didn't do it the "safe way" and move most
of the binaries to /bin & /lib64 and put symlinks in /usr but they evaded
answering that question for ~2 years . So one script I run after updating my
system is a
dependency checker that checks mount orders and tries to make sure that early
mounted disks don't have dependencies on later mounted disks.
3) adding to my problem was that I don't use an initrd to boot. I boot
from my hard disk. My distro folks thought they had solved the problem
by hiding the mount of /usr in the initrd, so when they start systemd to
control the boot, it is happy. But if you boot from HD, I was told my
~15 year old configuration was no longer supported. Bleh!,
One thing that might account for speed diffs, is that I don't wait for
udev to start my VG's, ... and here is where I think I see my ~15 second
pause:
if test -d /etc/lvm -a -x /sbin/vgscan -a -x /sbin/vgchange ; then
# Waiting for udev to settle
if [ "$LVM_DEVICE_TIMEOUT" -gt 0 ] ; then
echo "Waiting for udev to settle..."
/sbin/udevadm settle --timeout=$LVM_DEVICE_TIMEOUT
fi
echo "Scanning for LVM volume groups..."
/sbin/vgscan --mknodes
echo "Activating LVM volume groups..."
/sbin/vgchange -a y $LVM_VGS_ACTIVATED_ON_BOOT
mount -c -a -F
...
So at the point where I have a pause, I'm doing vgscan and vgchange, then
a first shot at mounting "all" (it was the easiest thing to fix/change).
Without that mount all attempt in my 4th "boot script" to execute -- boot.lvm,
I often had long timeouts in the boot process. But as you can see, I
tell mount to go "fork(-F)" and try to mount all FS's at the same time. I'm
pretty sure that's where the pause is given that right after the pause,
XFS starts issuing messages about "DM's" being mounted.
Somewhere around script #8 is my distro's "localfs" mounts -- but for me,
that was way too late, since many of the boot utils not only used
/usr, but /usr/share (another partition after /usr/share grew too big -- and
it *is* on a VG.
In summary -- I had very long waits (minutes) using the distro boot
scripts (people report longer wait times using the systemd startup
method where they are also using non-ssd disks). But after I made my
own changes -- out of necessity, I had nominal (no error/timeout probs)
boot times drop from around 35 down to around 25 seconds (it's a server
-- so lots of server processes, but no desktop).
So, it seems like the dm functions aren't being announced to udev properly
(maybe?),
but the early 'mount "all, in parallel, in background" early in my boot process
seems to have solved most of the time delay probs.
I *do* get duplicate mount messages later on when distro scripts try to mount
everything, but they seem to be harmless at this point:
tmpfs : already mounted
tmpfs : already mounted
/run : successfully mounted
/dev/sdc6 : already mounted
/dev/Data/UsrShare : already mounted
/dev/sdc2 : already mounted
/var/rtmp : successfully mounted
/dev/Data/Home.diff : already mounted
/dev/sdc3 : already mounted
/dev/Data/Home : already mounted
/dev/Data/Share : already mounted
/dev/Data/Media : already mounted
/dev/sdc8 : already mounted
/dev/Data/cptest : already mounted
---
As far as lv's, most are on the same 'VG': Data:
Home Data owc-aos-- 1.50t
Home-2015.02.17-03.07.03 Data -wi-ao--- 796.00m
Home-2015.03.01-03.07.03 Data -wi-ao--- 884.00m
Home-2015.03.03-03.07.03 Data -wi-ao--- 812.00m
Home-2015.03.05-03.07.03 Data -wi-ao--- 868.00m
Home-2015.03.07-03.07.02 Data -wi-ao--- 740.00m
Home-2015.03.09-03.07.02 Data -wi-ao--- 856.00m
Home-2015.03.11-03.07.03 Data -wi-ao--- 1.14g
Home-2015.03.12-03.07.02 Data -wi-ao--- 868.00m
Home-2015.03.13-03.07.06 Data -wi-ao--- 1000.00m
Home-2015.03.16-03.07.12 Data -wi-ao--- 840.00m
Home-2015.03.17-03.07.03 Data -wi-ao--- 888.00m
Home-2015.03.19-03.07.03 Data swi-aos-- 1.50t Home 0.65
Home.diff Data -wi-ao--- 512.00g
Lmedia Data -wi-ao--- 8.00t
Local Data -wi-ao--- 1.50t
Media Data -wc-ao--- 10.00t
Share Data -wc-ao--- 1.50t
Squid_Cache Data -wc-ao--- 128.00g
Sys Data -wc-a---- 96.00g
Sysboot Data -wc-a---- 4.00g
Sysvar Data -wc-a---- 28.00g
UsrShare Data -wc-ao--- 50.00g
Win Data -wi-a---- 1.00t
cptest Data -wi-ao--- 5.00g
---
As you can see, I have the 1 snapshot of home (that gets used to
generate the time-labeled snaps)....
So maybe try adding a "2nd" mount of the file systems right after udev & lvm
activate. My startup scripts before I do the mount:
S01boot.sysctl@
S01boot.usr-mount@
S02boot.udev@
S04boot.lvm@
--- in the lvm script is where I added the early mount w/fork.
(I did have to make sure my mount/fsck order in fstab was correct. Since the
disks are all XFS, the fsck is mostly a no-op, so I usually point fsck.xfs at
/bin/true.
Anyway, it's a fairly trivial test...
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lvm2 in Ubuntu.
https://bugs.launchpad.net/bugs/1396213
Title:
LVM VG is not activated during system boot
Status in One Hundred Papercuts:
Confirmed
Status in initramfs-tools package in Ubuntu:
Confirmed
Status in linux package in Ubuntu:
Confirmed
Status in lvm2 package in Ubuntu:
Confirmed
Bug description:
Hi all,
I open this report based on the linked conversation I had on the linux-lvm
mailing list, and the Ask Ubuntu question I posted regarding this case.
https://www.redhat.com/archives/linux-lvm/2014-November/msg00023.html
https://www.redhat.com/archives/linux-lvm/2014-November/msg00024.html
http://askubuntu.com/questions/542656/lvm-vg-is-not-activated-during-system-boot
I have 2 VGs on my system, and for some reason, only one of them gets
activated during the initrd boot sequence, which doesn't have my root
LV, so my boot sequence halts with an initrd prompt.
When I get to the initrd BusyBox prompt, I can see my LVs are inactive
with "lvm lvscan" – then, "lvm vgchange -ay" brings them online. The
boot sequence continues as I exit the BusyBox prompt. The expected
behaviour would be that both VGs should activate automatically.
On LVM mailing list, I've been advised it may be a problem with Ubuntu
initrd scripts, hence I report this problem here. (I'm not sure if I'm
reporting it to the correct place by assigning it to "linux", but I
didn't find a package directly related to the initrd only, so I
assumed initrd scripts are maintained by the kernel team. If you think
it's an error, and know the correct package, please reassign!) Our
suspicion is, initrd prematurely issues "vgchange -ay" before all the
PVs come online. This makes sense.
I already tried to set the "rootdelay" kernel parameter to make initrd
wait longer for the boot LV to come up, but it didn't work. Note
however, it worked with previous kernel versions.
The problem came up when I upgraded to Utopic, and got kernel
vmlinuz-3.16.0-23-generic. When I boot with the old kernel from Trusty
(vmlinuz-3.13.0-37-generic), it works fine.
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version
k3.16.0-23-generic.
AplayDevices: Error: [Errno 2] No such file or directory
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path',
'/dev/snd/pcmC1D2p', '/dev/snd/pcmC1D1c', '/dev/snd/pcmC1D0c',
'/dev/snd/pcmC1D0p', '/dev/snd/controlC1', '/dev/snd/hwC0D0',
'/dev/snd/pcmC0D3p', '/dev/snd/controlC0', '/dev/snd/timer'] failed with exit
code 1:
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info: Error: [Errno 2] No such file or directory
Card0.Amixer.values: Error: [Errno 2] No such file or directory
Card1.Amixer.info: Error: [Errno 2] No such file or directory
Card1.Amixer.values: Error: [Errno 2] No such file or directory
DistroRelease: Ubuntu 14.10
HibernationDevice: RESUME=/dev/mapper/vmhost--vg-vmhost--swap0
InstallationDate: Installed on 2013-12-06 (354 days ago)
InstallationMedia: Ubuntu-Server 13.10 "Saucy Salamander" - Release amd64
(20131016)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: WinFast 6150M2MA
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_US:en
TERM=xterm-256color
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-23-generic
root=/dev/mapper/hostname--vg-hostname--rootfs ro rootflags=subvol=@
rootdelay=300
ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4
RelatedPackageVersions:
linux-restricted-modules-3.16.0-23-generic N/A
linux-backports-modules-3.16.0-23-generic N/A
linux-firmware 1.138
RfKill: Error: [Errno 2] No such file or directory
Tags: utopic utopic
Uname: Linux 3.16.0-23-generic x86_64
UnreportableReason: The report belongs to a package that is not installed.
UpgradeStatus: Upgraded to utopic on 2014-10-28 (28 days ago)
UserGroups:
_MarkForUpload: True
dmi.bios.date: 01/19/2008
dmi.bios.vendor: Phoenix Technologies, LTD
dmi.bios.version: 686W1D28
dmi.board.name: 6150M2MA
dmi.board.vendor: WinFast
dmi.board.version: FAB2.0
dmi.chassis.type: 3
dmi.chassis.vendor: WinFast
dmi.modalias:
dmi:bvnPhoenixTechnologies,LTD:bvr686W1D28:bd01/19/2008:svnWinFast:pn6150M2MA:pvrFAB2.0:rvnWinFast:rn6150M2MA:rvrFAB2.0:cvnWinFast:ct3:cvr:
dmi.product.name: 6150M2MA
dmi.product.version: FAB2.0
dmi.sys.vendor: WinFast
---
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
DistroRelease: Ubuntu 14.10
InstallationDate: Installed on 2013-12-06 (355 days ago)
InstallationMedia: Ubuntu-Server 13.10 "Saucy Salamander" - Release amd64
(20131016)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_US:en
TERM=linux
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
Tags: utopic
Uname: Linux 3.18.0-031800rc6-generic x86_64
UnreportableReason: The running kernel is not an Ubuntu kernel
UpgradeStatus: Upgraded to utopic on 2014-10-28 (29 days ago)
UserGroups:
_MarkForUpload: True
To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1396213/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
