** Description changed: Scheduled-For: ubuntu-22.12 - Upstream: tbd - Debian: 1.7-1 + Upstream: 1.7.1 + Debian: 1.7-2 Ubuntu: 1.7-1ubuntu3 - - ### New Debian Changes ### - bridge-utils (1.7-1) unstable; urgency=medium + bridge-utils (1.7-2) unstable; urgency=medium - * New upstream version. - Only messages related changes and compilation fixes. - * Remove preserve_gcc_flags patch (in upstream now). - * Bump standards, no change needed. - * Clarify portprio and fix example. - * Update upstream url. - * Fix NEWS versioning of last entry :-? + * Add BRIDGE_DISABLE_LINKLOCAL_IPV6_ALSO_PHYS to /etc/default/bridge-utils + to stop disabling IPv6 on physical interfaces of vlan ports if set to no. + Closes: #989162. + * Update interfaces man page, IPv6 works with STP on after DAD was fixed. + Closes: #980507. + * Treat vlan ports the same as ifupdown, avoid octal vlans. Closes: #995627. + * Update NEWS file to fix us blaming the kernel for the MAC address + selection that is really overridden by systemd. - -- Santiago Garcia Mantinan <ma...@debian.org> Wed, 24 Feb 2021 - 12:34:03 +0100 - - bridge-utils (1.6-6) unstable; urgency=medium - - * Fix IPv6 address getting assigned on hotplug devices. - Closes: #980752. - * Fix waiting so that DAD works again. Closes: #982943. - * Move mac setting before brctl addif to ensure mac setting. - Closes: #980856. - * Update documentation and add examples. Closes: #765098. - * Update manpages. Closes: #981253. - * Add a note on MTU settings. Closes: #292088. - * Hook also on down to recreate the bridge so that multiple - stanzas work Ok on ifdown. Closes: #319832. - - -- Santiago Garcia Mantinan <ma...@debian.org> Tue, 16 Feb 2021 - 13:29:04 +0100 - - bridge-utils (1.6-5) unstable; urgency=low - - * Overload bridge_hw to allow do specify an interface as well as the - MAC address. Closes: #966244. - * Change man page for bridge-utils-interfaces and news fileto document - this overloading. - - -- Santiago Garcia Mantinan <ma...@debian.org> Fri, 22 Jan 2021 - 11:08:47 +0100 - - bridge-utils (1.6-4) unstable; urgency=low - - * Add en* to the device regex so that all catches them. Closes: #966319. - * Document MAC address changes on news. Closes: #980505. - - -- Santiago Garcia Mantinan <ma...@debian.org> Thu, 21 Jan 2021 - 10:51:31 +0100 - - bridge-utils (1.6-3) unstable; urgency=medium - - * Support VLAN aware setups where we need vlan filtering. - Thanks Benedikt Spranger for the patch. Closes: #950879. - * Clarify on manual page that stp will get IPv6 lost. Closes: #736336. - * Add a 1 second sleep if hw address needs to be changed. Closes: #945466. - - -- Santiago Garcia Mantinan <ma...@debian.org> Thu, 30 Apr 2020 - 10:06:38 +0200 - - bridge-utils (1.6-2) unstable; urgency=medium - - * Bump Standards-Version. - * Preserve gcc flags set when building the lib. - - -- Santiago Garcia Mantinan <ma...@debian.org> Mon, 28 Jan 2019 - 00:25:14 +0100 - - bridge-utils (1.6-1) unstable; urgency=low - - * New upstream version. - * Change default back to not hotplug. Closes: #892277. - * Allow mtu to be set on the bridge by propagating it to the bridged - interfaces. Closes: #661711. - * Remove kernel headers from the package. - - -- Santiago Garcia Mantinan <ma...@debian.org> Tue, 15 Jan 2019 - 13:18:33 +0100 - - bridge-utils (1.5-16) unstable; urgency=medium - - * Don't set dev globally at bridge-utils.sh. Closes: #873086. - - -- Santiago Garcia Mantinan <ma...@debian.org> Sun, 08 Apr 2018 - 23:06:30 +0200 - - bridge-utils (1.5-15) unstable; urgency=medium - - * Fix substrings on interfaces. Closes: #873087. - * Make it lintian clean sticking to 1.0 source format for now. - No time to properly comment all the patches right now. - - -- Santiago Garcia Mantinan <ma...@debian.org> Fri, 02 Mar 2018 - 22:08:20 +0100 - - bridge-utils (1.5-14) unstable; urgency=low - - * Fix a problem with some vlan interfaces not being created. - - -- Santiago Garcia Mantinan <ma...@debian.org> Mon, 26 Jun 2017 - 17:48:37 +0200 - - bridge-utils (1.5-13) unstable; urgency=low - - * Fix a hardcoded interface name on bridge-utils.sh. Closes: #854841. - - -- Santiago Garcia Mantinan <ma...@debian.org> Sat, 11 Feb 2017 - 00:16:45 +0100 - - bridge-utils (1.5-12) unstable; urgency=medium - - * Add vlan support so that old setups using vlans as ports don't - break. - - -- Santiago Garcia Mantinan <ma...@debian.org> Sun, 22 Jan 2017 - 00:23:50 +0100 + -- Santiago García Mantiñán <ma...@debian.org> Mon, 03 Oct 2022 + 23:11:46 +0200 ### Old Ubuntu Delta ### bridge-utils (1.7-1ubuntu3) jammy; urgency=medium - * No-change rebuild for ppc64el baseline bump. + * No-change rebuild for ppc64el baseline bump. - -- Łukasz 'sil2100' Zemczak <lukasz.zemc...@ubuntu.com> Wed, 23 Mar + -- Łukasz 'sil2100' Zemczak <lukasz.zemc...@ubuntu.com> Wed, 23 Mar 2022 10:44:35 +0100 bridge-utils (1.7-1ubuntu2) impish; urgency=medium - * No-change rebuild to build packages with zstd compression. + * No-change rebuild to build packages with zstd compression. - -- Matthias Klose <d...@ubuntu.com> Thu, 07 Oct 2021 12:09:41 +0200 + -- Matthias Klose <d...@ubuntu.com> Thu, 07 Oct 2021 12:09:41 +0200 bridge-utils (1.7-1ubuntu1) impish; urgency=low - * Merge from Debian unstable. Remaining changes: - - Don't call ifup from bridge-network-interface, instead just call brctl - and let udev/upstart bring the interface up. - - debian/ifupdown.sh: Handle bridge params which use port and value - - debian/bridge-utils-interface.5: - + Update max, default value for path cost - + Update unsettable gcint value for newer kernels + * Merge from Debian unstable. Remaining changes: + - Don't call ifup from bridge-network-interface, instead just call brctl + and let udev/upstart bring the interface up. + - debian/ifupdown.sh: Handle bridge params which use port and value + - debian/bridge-utils-interface.5: + + Update max, default value for path cost + + Update unsettable gcint value for newer kernels - -- Steve Langasek <steve.langa...@ubuntu.com> Wed, 17 Mar 2021 + -- Steve Langasek <steve.langa...@ubuntu.com> Wed, 17 Mar 2021 12:32:22 -0700
-- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bridge-utils in Ubuntu. https://bugs.launchpad.net/bugs/1993387 Title: Merge bridge-utils from Debian unstable for lunar Status in bridge-utils package in Ubuntu: New Bug description: Scheduled-For: ubuntu-22.12 Upstream: 1.7.1 Debian: 1.7-2 Ubuntu: 1.7-1ubuntu3 ### New Debian Changes ### bridge-utils (1.7-2) unstable; urgency=medium * Add BRIDGE_DISABLE_LINKLOCAL_IPV6_ALSO_PHYS to /etc/default/bridge-utils to stop disabling IPv6 on physical interfaces of vlan ports if set to no. Closes: #989162. * Update interfaces man page, IPv6 works with STP on after DAD was fixed. Closes: #980507. * Treat vlan ports the same as ifupdown, avoid octal vlans. Closes: #995627. * Update NEWS file to fix us blaming the kernel for the MAC address selection that is really overridden by systemd. -- Santiago García Mantiñán <ma...@debian.org> Mon, 03 Oct 2022 23:11:46 +0200 ### Old Ubuntu Delta ### bridge-utils (1.7-1ubuntu3) jammy; urgency=medium * No-change rebuild for ppc64el baseline bump. -- Łukasz 'sil2100' Zemczak <lukasz.zemc...@ubuntu.com> Wed, 23 Mar 2022 10:44:35 +0100 bridge-utils (1.7-1ubuntu2) impish; urgency=medium * No-change rebuild to build packages with zstd compression. -- Matthias Klose <d...@ubuntu.com> Thu, 07 Oct 2021 12:09:41 +0200 bridge-utils (1.7-1ubuntu1) impish; urgency=low * Merge from Debian unstable. Remaining changes: - Don't call ifup from bridge-network-interface, instead just call brctl and let udev/upstart bring the interface up. - debian/ifupdown.sh: Handle bridge params which use port and value - debian/bridge-utils-interface.5: + Update max, default value for path cost + Update unsettable gcint value for newer kernels -- Steve Langasek <steve.langa...@ubuntu.com> Wed, 17 Mar 2021 12:32:22 -0700 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bridge-utils/+bug/1993387/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
