--- seen in dmesg ---
[    5.815777] Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
[    5.881465] NET: Registered protocol family 38
[    9.328954] wlo1: authenticate with 94:18:65:08:59:ae
[    9.338666] wlo1: send auth to 94:18:65:08:59:ae (try 1/3)
[    9.382307] wlo1: authenticated
[    9.384831] wlo1: associate with 94:18:65:08:59:ae (try 1/3)
[    9.389564] wlo1: RX AssocResp from 94:18:65:08:59:ae (capab=0x431 status=0 
aid=3)
[    9.392938] wlo1: associated
[    9.505267] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   64.717314] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[   64.772851] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: 
line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   64.772856] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[   64.772858] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
[   64.772860] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   64.772862] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   64.772863] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   64.772865] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   65.227287] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel 
HDMI/DP codec
[   65.231312] hdaudio hdaudioC0D2: Unable to configure, disabling
[   65.232125] input: HDA Intel PCH Headset Mic as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[   65.232353] input: HDA Intel PCH Headphone as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[  481.066720] kauditd_printk_skb: 22 callbacks suppressed
[  481.066723] audit: type=1400 audit(1663175820.795:34): apparmor="DENIED" 
operation="capable" profile="/usr/sbin/cups-browsed" pid=2107 
comm="cups-browsed" capability=23  capname="sys_nice"
[  482.476639] xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
[  482.476642] usb usb3: root hub lost power or was reset
[  482.476643] usb usb4: root hub lost power or was reset
[  482.598315] Lockdown: Xorg: raw io port access is restricted; see man 
kernel_lockdown.7
[  482.687635] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type 
mismatch - Found [Buffer], ACPI requires [Package] (20210331/nsarguments-61)
[  484.946351] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[  485.054903] rfkill: input handler disabled
[  491.657064] Bluetooth: RFCOMM TTY layer initialized
[  491.657070] Bluetooth: RFCOMM socket layer initialized
[  491.657073] Bluetooth: RFCOMM ver 1.11
[  491.886727] rfkill: input handler enabled
[  492.013259] Lockdown: Xorg: raw io port access is restricted; see man 
kernel_lockdown.7
[  493.174837] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[  493.434596] rfkill: input handler disabled

--- end of dmsg ---
" autoconfig for ALC294" =>

$ sudo lshw | grep ALC294 | wc -l
0
$
---
https://www.google.com/search?q=ALC294+%2Bg731 -> notably "g731" doesn't seem 
to be present in the google-search for ALC294 

https://www.google.com/search?q=%2BALC294+%2Bg731 => no match on g731

Why is there an attempt to initialize this non-existant hardware?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1988658

Title:
  boot stops at black screen (blinking cursor in top left corner);
  pulseaudio fails to intialize?

Status in pulseaudio package in Ubuntu:
  New

Bug description:
  $ cat /etc/os-release 
  NAME="Ubuntu"
  VERSION="20.04.5 LTS (Focal Fossa)"
  ID=ubuntu
  ID_LIKE=debian
  PRETTY_NAME="Ubuntu 20.04.5 LTS"
  VERSION_ID="20.04"
  HOME_URL="https://www.ubuntu.com/";
  SUPPORT_URL="https://help.ubuntu.com/";
  BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/";
  
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy";
  VERSION_CODENAME=focal
  UBUNTU_CODENAME=focal

  3 to 5 of 10 boot occasions stops prematurely.

  dmesg (included here, I assume)  indicates a pulseaudio failure stopping the 
booting.
  I have NOT investigated further (knowledge limit).

  This very latest bootup seemed to indicate that there is something
  waiting on the keyboard, as I got all the way "up" after beating
  repeatedly - alternating - on ESC and ENTER

  --- dmesg tail on this boot ---
  4 sec pause from previous line (at 9 secs)
  [   13.444028] xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, 
Reinit
  [   13.444031] usb usb3: root hub lost power or was reset
  [   13.444032] usb usb4: root hub lost power or was reset
  [   13.557170] Lockdown: Xorg: raw io port access is restricted; see man 
kernel_lockdown.7
  [   13.791732] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type 
mismatch - Found [Buffer], ACPI requires [Package] (20210331/nsarguments-61)
  [   17.001076] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
  [   17.105681] rfkill: input handler disabled
  [   28.694324] Bluetooth: RFCOMM TTY layer initialized
  [   28.694328] Bluetooth: RFCOMM socket layer initialized
  [   28.694331] Bluetooth: RFCOMM ver 1.11
  [   28.922797] rfkill: input handler enabled
  [   29.043050] Lockdown: Xorg: raw io port access is restricted; see man 
kernel_lockdown.7
  [   31.669031] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
  [   31.907300] rfkill: input handler disabled
  [   41.959736] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
  [   78.940836] xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, 
Reinit
  [   78.940840] usb usb3: root hub lost power or was reset
  [   78.940841] usb usb4: root hub lost power or was reset
  [  929.174665] xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, 
Reinit
  [  929.174669] usb usb3: root hub lost power or was reset
  [  929.174671] usb usb4: root hub lost power or was reset
  -- end ---

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: pulseaudio 1:13.99.1-1ubuntu3.13
  ProcVersionSignature: Ubuntu 5.13.0-52.59~20.04.1-generic 5.13.19
  Uname: Linux 5.13.0-52-generic x86_64
  NonfreeKernelModules: nvidia_modeset nvidia
  ApportVersion: 2.20.11-0ubuntu27.24
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/controlC0', 
'/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', 
'/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', 
'/dev/snd/pcmC1D10p', '/dev/snd/pcmC1D9p', '/dev/snd/pcmC1D8p', 
'/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', '/dev/snd/seq', '/dev/snd/timer'] 
failed with exit code 1:
  CasperMD5CheckResult: skip
  Date: Sun Sep  4 08:19:01 2022
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  SourcePackage: pulseaudio
  Symptom: audio
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/19/2021
  dmi.bios.release: 5.13
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: G731GU.312
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: G731GU
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.ec.firmware.release: 0.6
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrG731GU.312:bd02/19/2021:br5.13:efr0.6:svnASUSTeKCOMPUTERINC.:pnROGStrixG731GU_G731GU:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG731GU:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:sku:
  dmi.product.family: ROG Strix
  dmi.product.name: ROG Strix G731GU_G731GU
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1988658/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to     : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to