** Changed in: pulseaudio (Ubuntu)
Status: Incomplete => New
** Description changed:
When I change my sound output to use a HDMI output, even though `pactl
list` reports the correct volume level, the output volume is in fact
100%. Executing the following command afterwards solves the problem.
$ pactl set-sink-volume <SINK-NUM> +0
Attached is three outputs of `pactl list`:
1) "hdmi-before" : taken when HDMI output is working as it should
2) "hdmi-after" : this is taken after changing away from the HDMI output (to
laptop speaker), and back to HDMI again -- reported volume level is 50%, but
real output level is 100%.
3) "hdmi-after-adjust" : taken after executing the command listed above
(which sets real output level to 50%)
If it has any interest, I used the built in system settings to change
sound output (even though the same problem occurs when doing so from the
command line).
----
I'm using Ubuntu 14.04.1
$ pulseaudio --version
pulseaudio 4.0
$ pactl --version
pactl 4.0
Compiled with libpulse 4.0.0
Linked with libpulse 4.0.0
+
+ ----
+
+ Please see comment below if the problem still seems unclear
+
+ =================================================================
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: pulseaudio 1:4.0-0ubuntu11
ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
Uname: Linux 3.13.0-36-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: rasmus 2685 F.... pulseaudio
/dev/snd/pcmC0D0c: rasmus 2685 F...m pulseaudio
/dev/snd/pcmC0D3p: rasmus 2685 F...m pulseaudio
CurrentDesktop: Unity
Date: Wed Oct 8 19:49:58 2014
InstallationDate: Installed on 2014-05-23 (138 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
SourcePackage: pulseaudio
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/04/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: GAET35WW (1.12 )
dmi.board.asset.tag: Not Available
dmi.board.name: 33643EG
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias:
dmi:bvnLENOVO:bvrGAET35WW(1.12):bd07/04/2012:svnLENOVO:pn33643EG:pvrThinkPadEdgeS430:rvnLENOVO:rn33643EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 33643EG
dmi.product.version: ThinkPad Edge S430
dmi.sys.vendor: LENOVO
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1378969
Title:
pulseaudio doesn't enforce remembered volume when changing to HDMI
output
Status in “pulseaudio” package in Ubuntu:
New
Bug description:
When I change my sound output to use a HDMI output, even though `pactl
list` reports the correct volume level, the output volume is in fact
100%. Executing the following command afterwards solves the problem.
$ pactl set-sink-volume <SINK-NUM> +0
Attached is three outputs of `pactl list`:
1) "hdmi-before" : taken when HDMI output is working as it should
2) "hdmi-after" : this is taken after changing away from the HDMI output (to
laptop speaker), and back to HDMI again -- reported volume level is 50%, but
real output level is 100%.
3) "hdmi-after-adjust" : taken after executing the command listed above
(which sets real output level to 50%)
If it has any interest, I used the built in system settings to change
sound output (even though the same problem occurs when doing so from
the command line).
----
I'm using Ubuntu 14.04.1
$ pulseaudio --version
pulseaudio 4.0
$ pactl --version
pactl 4.0
Compiled with libpulse 4.0.0
Linked with libpulse 4.0.0
----
Please see comment below if the problem still seems unclear
=================================================================
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: pulseaudio 1:4.0-0ubuntu11
ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
Uname: Linux 3.13.0-36-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: rasmus 2685 F.... pulseaudio
/dev/snd/pcmC0D0c: rasmus 2685 F...m pulseaudio
/dev/snd/pcmC0D3p: rasmus 2685 F...m pulseaudio
CurrentDesktop: Unity
Date: Wed Oct 8 19:49:58 2014
InstallationDate: Installed on 2014-05-23 (138 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
SourcePackage: pulseaudio
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/04/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: GAET35WW (1.12 )
dmi.board.asset.tag: Not Available
dmi.board.name: 33643EG
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias:
dmi:bvnLENOVO:bvrGAET35WW(1.12):bd07/04/2012:svnLENOVO:pn33643EG:pvrThinkPadEdgeS430:rvnLENOVO:rn33643EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 33643EG
dmi.product.version: ThinkPad Edge S430
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1378969/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
