[Expired for cups (Ubuntu) because there has been no activity for 60
days.]
** Changed in: cups (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1256832
Title:
Canon Selphy CP510 not recognised by CUPS
Status in “cups” package in Ubuntu:
Expired
Bug description:
The USB Canon photo printer CP510 is not recognised by CUPS any more.
I found a gutenprint driver for that printer in the list. But that is
worthless, if CUPS dose not see the printer.
I'm actually using a system with ubuntu-gnome-13.10-desktop-amd64
The following printing software is installed by default:
CUPS 1.7.0~rc1-0ubuntu5.1
libgutenprint2 5.2.9-1ubuntu2
printer-driver-gutenprint 5.2.9-1ubuntu2
When I connect the CP510 to the USB port, the following lines where
reported to syslog:
Nov 30 17:03:02 ESP kernel: [ 512.339493] usb 1-1.2: new full-speed USB
device number 3 using ehci-pci
Nov 30 17:03:02 ESP kernel: [ 512.435499] usb 1-1.2: New USB device found,
idVendor=04a9, idProduct=3128
Nov 30 17:03:02 ESP kernel: [ 512.435505] usb 1-1.2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Nov 30 17:03:02 ESP kernel: [ 512.435508] usb 1-1.2: Product: Canon SELPHY
CP510
Nov 30 17:03:02 ESP kernel: [ 512.435511] usb 1-1.2: Manufacturer: Canon
Inc.
Nov 30 17:03:02 ESP mtp-probe: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2"
Nov 30 17:03:02 ESP mtp-probe: bus: 1, device: 3 was not an MTP device
Nov 30 17:03:02 ESP kernel: [ 512.471905] usblp 1-1.2:1.0: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x3128
Nov 30 17:03:02 ESP kernel: [ 512.471940] usbcore: registered new interface
driver usblp
lsusb -v shows the following info for the device:
Bus 003 Device 003: ID 04a9:3128 Canon, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04a9 Canon, Inc.
idProduct 0x3128
bcdDevice 0.01
iManufacturer 1 Canon Inc.
iProduct 2 Canon SELPHY CP510
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Device Status: 0x0001
Self Powered
“lpinfo” and “check-device-ids.py” does not show the printer.
My Brother laser printer was recognised by CUPS immediately and works
perfect on that system.
On an older linux installation with CUPS 1.5.4-22 the CP510 printer
works without problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1256832/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
