http://git.kernel.org/cgit/linux/kernel/git/tiwai/hda- emu.git/tree/codecs/vt1802-asus-u30s?id=HEAD
compare with this notebook, device 0 nid is using speaker 's audio output and device 2 is using headphone 's audio output seem spec->gen.indep_hp = 1 is not enough to force the driver to use speaker audio output by device 0 => lo_type=2, wired=1, mio=1, badness=0x0 multi_outs = 25/0/0/0 : 8/0/0/0 (type HP) out path: depth=4 :08:35:15:25 spk_outs = 24/0/0/0 : 9/0/0/0 spk path: depth=4 :09:34:14:24 mix path: depth=4 :08:21:15:25 mix path: depth=4 :08:21:14:24 ==> Best config: lo_type=2, wired=1, mio=1 multi_outs = 25/0/0/0 : 8/0/0/0 (type HP) out path: depth=4 :08:35:15:25 spk_outs = 24/0/0/0 : 9/0/0/0 spk path: depth=4 :09:34:14:24 mix path: depth=4 :08:21:15:25 mix path: depth=4 :08:21:14:24 https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/sound/pci/hda/hda_generic.c you need to change static bool indep_hp_possible(struct hda_codec *codec) { struct hda_gen_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; struct nid_path *path; int i, idx; + if (cfg->line_out_type == AUTO_PIN_HP_OUT) + return false; if (cfg->line_out_type == AUTO_PIN_HP_OUT) idx = spec->out_paths[0]; http://git.kernel.org/cgit/linux/kernel/git/tiwai/hda- emu.git/tree/codecs/vt1802-asus-g75?id=HEAD but it is strange that there are two volume controls in same node when it has headphone, speaker and subwoofer Node 0x08 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT1802 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x22 0x22] Converter: stream=8, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x09 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1d 0x1d] Converter: stream=8, channel=2 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 in your case , it is strange that balanced is set in eapd EAPD 0x3: BALANCED EAPD BTL controls the output configuration of a Pin Widget which has indicated support for balanced I/O (bit 6, Pin Capabilities Parameter). When this bit is 0, the output drivers are configured in normal, single-ended mode; when this bit is 1, they are configured in balanced mode. Note that in balanced mode, the Pin Widget has twice as many pins as it does in normal mode; i.e., a stereo Pin Widget in balanced mode has four signal pins (in addition to Vref pins). However, in both modes it must appear to software as a single Pin Widget. The additional pins must be reserved to this purpose; thus, in a configuration supporting BTL outputs the additional pins may not be enumerated as a separate Pin Widget. Node 0x24 [Pin Complex] wcaps 0x40050d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010050: OUT EAPD Balanced EAPD 0x3: BALANCED EAPD Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x14* 0x3e -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1313904 Title: [W230SS, VIA VT1802, Green Headphone Out, Front] No sound after suspend/resume Status in ALSA driver: Unknown Status in “alsa-driver” package in Ubuntu: Confirmed Bug description: No sound in headphones jack after suspend/resume. But sound in headphones jack is OK after cold boot. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 Uname: Linux 3.15.0-031500rc2-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: mik 2139 F.... pulseaudio /dev/snd/controlC1: mik 2139 F.... pulseaudio CurrentDesktop: Unity Date: Mon Apr 28 23:20:59 2014 InstallationDate: Installed on 2014-04-26 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Вбудоване аудіо - HDA Intel PCH Symptom_DevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: mik 2139 F.... pulseaudio /dev/snd/controlC1: mik 2139 F.... pulseaudio Symptom_Jack: Green Headphone Out, Front Symptom_Type: No sound at all Title: [W230SS, VIA VT1802, Green Headphone Out, Front] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/11/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: W230SS dmi.board.vendor: Notebook dmi.board.version: Not Applicable dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: Notebook dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/11/2014:svnNotebook:pnW230SS:pvrNotApplicable:rvnNotebook:rnW230SS:rvrNotApplicable:cvnNotebook:ct9:cvrN/A: dmi.product.name: W230SS dmi.product.version: Not Applicable dmi.sys.vendor: Notebook mtime.conffile..etc.modprobe.d.alsa.base.conf: 2014-04-28T23:13:10.065027 To manage notifications about this bug go to: https://bugs.launchpad.net/alsa-driver/+bug/1313904/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
