On Thu, Jun 16, 2022 at 05:14:53PM +0100, Edd Barrett wrote: > Hi, > > Has anyone managed to get a Lenovo ThinkCentre M910q (or similar) to suspend > with OpenBSD? > > When invoking `zzz` the system prepares to go down, the screen goes blank, but > then a short while later, the system comes back, as though it was awoken > straight away.
did it ever work in the past? > > Here's the diff between the initial dmesg and the dmesg after this "suspend > and > come back" described above: > > ``` > --- dmesg Thu Jun 16 16:53:44 2022 > +++ dmesg.1 Thu Jun 16 16:55:31 2022 > @@ -360,3 +360,22 @@ > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > +uhub0 detached > +uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > +drm:pid42656:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:94:DDI J/PHY @] is disabled/in DSI mode with an ungated DDI clock, > gate it > +drm:pid42656:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:109:DDI J/PHY @] is disabled/in DSI mode with an ungated DDI clock, > gate it > +drm:pid42656:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:119:DDI J/PHY @] is disabled/in DSI mode with an ungated DDI clock, > gate it > +uhidev0 at uhub0 port 11 configuration 1 interface 0 "SINO WEALTH Gaming KB" > rev 2.00/1.03 addr 2 > +uhidev0: iclass 3/1 > +ukbd0 at uhidev0: 8 variable keys, 6 key codes > +wskbd1 at ukbd0 mux 1 > +wskbd1: connecting to wsdisplay0 > +uhidev1 at uhub0 port 11 configuration 1 interface 1 "SINO WEALTH Gaming KB" > rev 2.00/1.03 addr 2 > +uhidev1: iclass 3/0, 5 report ids > +ukbd1 at uhidev1 reportid 1: 120 variable keys, 0 key codes > +wskbd2 at ukbd1 mux 1 > +wskbd2: connecting to wsdisplay0 > +ucc0 at uhidev1 reportid 2: 573 usages, 18 keys, array > +wskbd3 at ucc0 mux 1 > +wskbd3: connecting to wsdisplay0 > +uhid0 at uhidev1 reportid 5: input=0, output=0, feature=5 > ``` > > Is it odd that devices come back which we never saw detach? > > Repeating the same again, but with the inteldrm driver disabled, in case those > scary messages have something to do with this: > > ``` > --- dmesg Thu Jun 16 17:04:43 2022 > +++ dmesg.1 Thu Jun 16 17:05:01 2022 > @@ -554,3 +554,19 @@ > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (5d59e5562a788986.a) swap on sd0b dump on sd0b > +wskbd1: disconnecting from wsdisplay0 > +wskbd1 detached > +ukbd0 detached > +uhidev0 detached > +wskbd2: disconnecting from wsdisplay0 > +wskbd2 detached > +ukbd1 detached > +wskbd3: disconnecting from wsdisplay0 > +wskbd3 detached > +ucc0 detached > +uhid0 detached > +uhidev1 detached > +uhub0 detached > +uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > +uhub0: port 11, set config 0 at addr 2 failed > +uhub0: device problem, disabling port 11 > ``` > > This time we see more devices detach, but when uhub0 comes back there is a > problem. curious... > > Does anyone have any idea what is going on here? This was due to be my new > porting box, but I need it to suspend... > > (FWIW: the system also fails to come up from ZZZ hibernate, but one thing at a > time) > > Full dmesg (with inteldrm): > > ``` > OpenBSD 7.1-current (GENERIC.MP) #582: Mon Jun 13 15:37:01 MDT 2022 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17044692992 (16255MB) > avail mem = 16510771200 (15745MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xdcd91000 (88 entries) > bios0: vendor LENOVO version "M1AKT39A" date 07/16/2018 > bios0: LENOVO 10MUS2UG00 > acpi0 at bios0: ACPI 6.1 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SLIC MSDM SSDT SSDT HPET > SSDT UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR TPM2 LUFT ASF! BGRT > acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) > SIO1(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) > PXSX(S4) RP13(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz, 2394.42 MHz, 06-5e-03 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz, 2394.43 MHz, 06-5e-03 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz, 2394.43 MHz, 06-5e-03 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz, 2394.43 MHz, 06-5e-03 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 23999999 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus -1 (PEG2) > acpiprt4 at acpi0: bus -1 (RP09) > acpiprt5 at acpi0: bus -1 (RP10) > acpiprt6 at acpi0: bus -1 (RP11) > acpiprt7 at acpi0: bus -1 (RP12) > acpiprt8 at acpi0: bus -1 (RP13) > acpiprt9 at acpi0: bus -1 (RP01) > acpiprt10 at acpi0: bus -1 (RP02) > acpiprt11 at acpi0: bus -1 (RP03) > acpiprt12 at acpi0: bus -1 (RP04) > acpiprt13 at acpi0: bus -1 (RP05) > acpiprt14 at acpi0: bus -1 (RP06) > acpiprt15 at acpi0: bus -1 (RP07) > acpiprt16 at acpi0: bus -1 (RP08) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpiprt25 at acpi0: bus -1 (RP14) > acpiprt26 at acpi0: bus -1 (RP15) > acpiprt27 at acpi0: bus -1 (RP16) > acpiec0 at acpi0: not present > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "INT33A1" at acpi0 not configured > acpibtn1 at acpi0: PWRB > tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x880, device 0x00000000 rev 0x0 > "PNP0C14" at acpi0 not configured > "LEN4001" at acpi0 not configured > acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PG00, resource for PEG0 > acpipwrres1 at acpi0: PG01, resource for PEG1 > acpipwrres2 at acpi0: PG02, resource for PEG2 > acpipwrres3 at acpi0: WRST > acpipwrres4 at acpi0: WRST > acpipwrres5 at acpi0: WRST > acpipwrres6 at acpi0: WRST > acpipwrres7 at acpi0: WRST > acpipwrres8 at acpi0: WRST > acpipwrres9 at acpi0: WRST > acpipwrres10 at acpi0: WRST > acpipwrres11 at acpi0: WRST > acpipwrres12 at acpi0: WRST > acpipwrres13 at acpi0: WRST > acpipwrres14 at acpi0: WRST > acpipwrres15 at acpi0: WRST > acpipwrres16 at acpi0: WRST > acpipwrres17 at acpi0: WRST > acpipwrres18 at acpi0: WRST > acpipwrres19 at acpi0: WRST > acpipwrres20 at acpi0: WRST > acpipwrres21 at acpi0: WRST > acpipwrres22 at acpi0: WRST > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2501, 2500, 2400, 2300, 2100, > 2000, 1900, 1800, 1600, 1500, 1400, 1300, 1200, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 > drm0 at inteldrm0 > inteldrm0: msi, SKYLAKE, gen 9 > xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI > 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured > "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured > ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI > 1.3.1 > ahci0: PHY offline on port 0 > ahci0: PHY offline on port 1 > ahci0: PHY offline on port 2 > ahci0: PHY offline on port 3 > scsibus1 at ahci0: 32 targets > ppb0 at pci0 dev 27 function 0 "Intel 200 Series PCIE" rev 0xf0: msi > pci1 at ppb0 bus 1 > nvme0 at pci1 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00: msix, > NVMe 1.2 > nvme0: SAMSUNG MZVLW128HEGR-000L1, firmware 5L1QCXB7, serial S341NX0K521287 > scsibus2 at nvme0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <NVMe, SAMSUNG MZVLW128, 5L1Q> > sd0: 122104MB, 512 bytes/sector, 250069680 sectors > pcib0 at pci0 dev 31 function 0 "Intel Q270 LPC" rev 0x00 > "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi > azalia0: codecs: Realtek ALC294, Intel/0x2809, using Realtek ALC294 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 > int 16 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-19200 SO-DIMM > spdmem1 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-19200 SO-DIMM > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x00: msi, address > 6c:4b:90:7e:76:f4 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (5d59e5562a788986.a) swap on sd0b dump on sd0b > WARNING: clock gained 2 days > WARNING: CHECK AND RESET THE DATE! > drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:94:DDI \M-j/PHY ] is disabled/in DSI mode with an ungated DDI > clock, gate it > drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:109:DDI \M-j/PHY ] is disabled/in DSI mode with an ungated DDI > clock, gate it > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ``` > > -- > Best Regards > Edd Barrett > > https://www.theunixzoo.co.uk >
