Le 16.11.15 18:42, Jason Barbier a écrit :
Looks like you need to email support and get the updated BIOS. I had the
same problem and there is an update to the bios to allow for mSATA boot
but not SD card boot yet.
Yes, mSATA install and boot works after this bios update:
http://pcengines.ch/file/apu151109.zip
SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
BUILD: gcc: binutils: (GNU Binutils) 2.23.2
<...>
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $
(wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
But hooking a 2TB WD Element HDD still hangs the APU2 on the next reboot
(4k sectors, USB 3.0, bad init timings in the bios ?)
Symptoms:
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
WARNING - Timeout at wait_bit:310!
<...>
USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0
call16 with invalid stack
And if you choose the memtest payload, there is no way to abort it.
Mathias
On Sat, Nov 14, 2015, at 10:22 AM, Mathias Schmocker wrote:
> Le 14.11.15 17:02, Chris Cappuccio a écrit :
> > Mathias Schmocker [s...@smat.ch] wrote:
> >>
> >> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
> >> installation on the 16GB mSata internal storage.
> >> After reboot, BIOS could find mSata to boot on, but defaulted to the
> memtest
> >> boot payload
> >>
> >
> > This is a setting you can change, although the default boot order
> would put memtest last.
>
> Not for me:
>
> 1. USB MSC Drive SanDisk Ultra Fit 1.00
> 2. Payload [memtest]
> 3. Payload [setup]
>
> I have now successfully installed and booted on a small 16GB SanDisk USB
> key, root on sd1a (but I had a hard lockup once, with >
> xhci_wait_for_command: Command ring still running ...)
>
> But pressing F10 and 3 to access setup and placing mSata in front of all
> the other does NOT work (even if sd0a has a bootable bsd.rd, /boot and
> the proper /etc/boot.conf, and is accessible once OpenBSD runs out of
> the USB key ...)
>
> Which SeaBIOS, BUILD version, and option rom does your APU2 display when
> booting up ?
>
> > I've had no problems with apu2 detecting msata so far..
> >
> >> Unable to abort memtest by pressing (esc) on the serial console, or
> (c) for
> >> configure.
> >>
> >
> > You have to escape to the prompt before memtest starts.
> >
> >
>