Hi, This is in the same vein as [1], which replaced the usage of `Ar' with `Cm' where applicable. Besides that, I unindented line 134 because `-offset indent' is already being used, but that's it.
Regards, Michael [1]: https://marc.info/?l=openbsd-tech&m=143778713715847&w=2 Index: src/share/man/man7/ports.7 =================================================================== RCS file: /cvs/src/share/man/man7/ports.7,v retrieving revision 1.102 diff -u -p -r1.102 ports.7 --- src/share/man/man7/ports.7 30 Jul 2015 08:03:50 -0000 1.102 +++ src/share/man/man7/ports.7 18 Aug 2015 16:47:40 -0000 @@ -80,19 +80,19 @@ The ports master Makefile, normally loca below) offers a few useful targets. .Bl -tag -width configure -.It Ar index +.It Cm index rebuild the ports complete index, .Pa /usr/ports/INDEX -.It Ar pkglocatedb +.It Cm pkglocatedb build a .Xr pkg_mklocatedb 1 database file and place it in .Pa ${PORTSDIR}/packages/${MACHINE_ARCH}/ftp , for use by .Xr locate 1 , -.It Ar print-index +.It Cm print-index display the contents of the index in a user-friendly way, -.It Ar search +.It Cm search invoked with a key, e.g., .Ic make search key=foo , retrieve information relevant to a given port (obsolescent). @@ -128,10 +128,10 @@ port maintained by a given person. .El .Pp For instance, to invoke -.Ar clean +.Cm clean on all ports in the x11 category, one can say: .Bd -literal -offset indent - $ make category=x11 clean +$ make category=x11 clean .Ed .Pp The index search is done by a perl script, so all regular expressions from @@ -201,17 +201,17 @@ with the target that failed to and proceed. .Pp Some targets that do this are -.Ar all , build , checksum , clean , -.Ar configure , extract , fake , -.Ar fetch , install , distclean , -.Ar deinstall , reinstall , package , prepare , -.Ar link-categories , unlink-categories , -.Ar describe , show , regress , -.Ar lib-depends-check , homepage-links , manpages-check , -.Ar license-check , all-dir-depends , build-dir-depends , -.Ar run-dir-depends +.Cm all , build , checksum , clean , +.Cm configure , extract , fake , +.Cm fetch , install , distclean , +.Cm deinstall , reinstall , package , prepare , +.Cm link-categories , unlink-categories , +.Cm describe , show , regress , +.Cm lib-depends-check , homepage-links , manpages-check , +.Cm license-check , all-dir-depends , build-dir-depends , +.Cm run-dir-depends and -.Ar readmes . +.Cm readmes . .Pp Target names starting with .Sq _ @@ -221,26 +221,26 @@ should not be invoked directly, and are In the following list, each target will run the preceding targets in order automatically. That is, -.Ar build +.Cm build will be run .Pq if necessary by -.Ar install , +.Cm install , and so on all the way to -.Ar fetch . +.Cm fetch . In typical use, one will only run -.Ar install +.Cm install explicitly (as normal user, with .Ev SUDO defined in .Pa /etc/mk.conf ) , or -.Ar build +.Cm build (as user), then -.Ar install +.Cm install (as root). .Bl -tag -width configure -.It Ar fetch +.It Cm fetch Fetch all of the files needed to build this port from the site(s) listed in .Ev MASTER_SITES . @@ -253,7 +253,7 @@ Use with option .Fl F to quickly fetch distfiles for a subtree. -.It Ar checksum +.It Cm checksum Verify that the fetched distfile matches the one the port was tested against. Defining .Ev NO_CHECKSUM @@ -270,7 +270,7 @@ $ make checksum REFETCH=true .Ed .Pp will try to get a set of distfiles that match the recorded checksum. -.It Ar prepare +.It Cm prepare Install any build dependencies of the current port. Defining @@ -278,63 +278,63 @@ Defining to .Dv Yes will skip this step. -.It Ar extract +.It Cm extract Expand the distfile into a work directory. -.It Ar patch +.It Cm patch Apply any patches that are necessary for the port. -.It Ar configure +.It Cm configure Configure the port. Some ports will ask questions during this stage. See .Ev INTERACTIVE and .Ev BATCH . -.It Ar build +.It Cm build Build the port. This is the same as calling the -.Ar all +.Cm all target. -.It Ar fake +.It Cm fake Pretend to install the port under a subdirectory of the work directory. -.It Ar package +.It Cm package Create a binary package from the fake installation. The package is a .tgz file that can be used to install the port with .Xr pkg_add 1 . -.It Ar install +.It Cm install Install the resulting package. .El .Pp The following targets are not run during the normal install process. .Bl -tag -width fetch-list -.It Ar print-build-depends , print-run-depends +.It Cm print-build-depends , print-run-depends Print an ordered list of all the compile and run dependencies. -.It Ar clean +.It Cm clean Remove the expanded source code. This does not recurse to dependencies unless .Ev CLEANDEPENDS is defined to .Dv Yes . -.It Ar distclean +.It Cm distclean Remove the port's distfile(s). This does not recurse to dependencies. -.It Ar regress +.It Cm regress Runs the ports regression tests. Usually needs a completed build. -.It Ar reinstall +.It Cm reinstall Use this to restore a port after using .Xr pkg_delete 1 . -.It Ar update +.It Cm update Alternative target to -.Ar install . +.Cm install . Does not install new packages, but updates existing ones. -.It Ar link-categories +.It Cm link-categories Populate the ports tree with symbolic links for each category the port belongs to. -.It Ar unlink-categories +.It Cm unlink-categories Remove the symbolic links created by -.Ar link-categories . -.It Ar homepage-links +.Cm link-categories . +.It Cm homepage-links creates an html list of links for each port .Ev HOMEPAGE . .El @@ -375,12 +375,12 @@ $ make build .Pp will acquire the lock, run the port through -.Ar fetch , -.Ar checksum , -.Ar extract , -.Ar patch , -.Ar configure , -.Ar build , +.Cm fetch , +.Cm checksum , +.Cm extract , +.Cm patch , +.Cm configure , +.Cm build , then release the lock. If dependencies are involved, they will invoke top-level targets in other directories, and thus acquire some other locks as well. @@ -392,9 +392,9 @@ twice, thus recursive locking is not nee Starting with .Ox 4.3 , the infrastructure supports manual locking: the targets -.Ar lock +.Cm lock and -.Ar unlock +.Cm unlock can be used to acquire and release individual locks. Both these targets output a shell command that must be used to update environment variables. @@ -405,7 +405,7 @@ given port. Instead of deinstalling each package and rebuilding from scratch, the ports tree can be used to update installed packages. The -.Ar update +.Cm update target will replace an installed package using .Xr pkg_add 1 in replacement mode. @@ -531,7 +531,7 @@ In this instance, the corresponding pack .Ic screen-4.0.2-static . .Pp To see the flavors of a port, use the -.Ar show +.Cm show target: .Bd -literal -offset indent $ make show=FLAVORS @@ -637,7 +637,7 @@ Where to find/put distfiles, normally .Pa ${PORTSDIR}/distfiles .It Ev PACKAGE_REPOSITORY Used only for the -.Ar package +.Cm package target; the base directory for the packages tree, normally .Pa ${PORTSDIR}/packages . If this directory exists, the package tree will be (partially) constructed. @@ -662,7 +662,7 @@ Primary sites for distribution files if If set to .Dv Yes , let -.Ar clean +.Cm clean recurse to dependencies. .It Ev FETCH_CMD Command to use to fetch files. @@ -685,9 +685,9 @@ If defined, only operate on a port if it Set to .Dv Yes to protect the -.Ar configure , build , +.Cm configure , build , and -.Ar fake +.Cm fake targets with .Xr systrace 1 . This way it is ensured that ports do not make any network connections
