On 23/09/14(Tue) 13:58, Brad Smith wrote: > On 31/12/13 12:06 AM, Brad Smith wrote: > >On 16/05/13 5:55 PM, Jérémie Courrèges-Anglas wrote: > >>Hi, > >> > >>I've been using msk(4) with MSI on my laptop since a few days, with no > >>apparent problem. > >> > >>mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8040" rev 0x13, > >>Yukon-2 FE+ rev. A0 (0x0): msi > >>msk0 at mskc0 port A: address 00:24:54:xx:xx:xx > >>eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0 > >> > >>Other systems all seem to use MSI, but it would be cool if people with > >>different chips could test it. > > > >Any other msk(4) users? It has also been tested with EC 8052/EC Ultra > >8058 controllers and working. I don't see any indication of any issues > >or errata regarding MSI operation in either of the FreeBSD or Linux > >drivers. > > Fast Ethernet controller.. > > mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x16, Yukon-2 > FE rev. A1 (0x1): msi > msk0 at mskc0 port A: address 00:13:a9:fa:5a:52 > eephy0 at msk0 phy 0: 88E3082 10/100 PHY, rev. 3 > > Gigabit controllers.. > > mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8058" rev 0x13, Yukon-2 EC > Ultra rev. B0 (0x3): msi > msk0 at mskc0 port A: address 00:1b:63:ad:0b:ee > eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 > > mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x20, Yukon-2 EC > rev. A3 (0x2): msi > msk0 at mskc0 port A: address 00:50:43:00:7b:46 > eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 > > mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Yukon-2 > EC rev. A3 (0x2): msi > msk0 at mskc0 port A: address 00:18:f3:6c:44:da > eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 > > > At this point I'd like to see this commited for wider spread testng > and if anything does come up as usual it can be reverted.
I agree.
