On Sun, Apr 13, 2014 at 8:00 AM, Abel Abraham Camarillo Ojeda <acam...@verlet.org> wrote: > On Tue, Apr 8, 2014 at 9:44 PM, Abel Abraham Camarillo Ojeda > <acam...@verlet.org> wrote: >> well, I didn't mentioned it I already tried that -disable radeondrm- >> with -current, >> didn't work, will try again to provide log file... >> >> As soon as I can get home.... .... ... >> >> On Tue, Apr 8, 2014 at 5:46 PM, Mike Larkin <mlar...@azathoth.net> wrote: >>> On Tue, Apr 08, 2014 at 05:30:59PM -0500, Abel Abraham Camarillo Ojeda >>> wrote: >>>> will provide dmesg from 5.3, 'zzz' works in 5.3 -with or without serial >>>> console- >>>> 'zzz' dont works in 5.4 -with or without serial console- >>>> zzz dont works in 5.5~ with or without serial console >>>> zzz dont works in -current with or without serial console >>>> >>>> I was trying to build some kernels between 5.3 and 5.4 to see when >>>> this machine breaks, >>>> had no time to do it though... >>>> >>> Thanks, this information is helpful. >>> >>> Can you try one test with disabled radeondrm? >>> >>> config -ef /bsd >>> disable radeondrm >>> quit >>> >>> -ml > > > I still haven't got time to test 5.3 again - some of my disks died-, > but when I push the power button in my desktop and have > a serial console I can get a ddb prompt if I previously set ddb.console=1, > now I inline -and attach- ddb's dmesg, ps and trace post -failed- resume. > > Disabling radeondrm* shows no changes -with radeondrm0 enabled I just > don't get any output in screen (with or without serial console) after > resuming (press power button in case)-. > > > In current as april 3: > > The problems evidences in ddb's dmesg -but not in serial console directly-: > > ahci0: device on port 1 didn't come ready, TFD: 0x150 > > Any ideas how to further debug? > > Thanks. >
Now I don't think that ahci has anything to do with this resume problem, if I disable AHCI in bios and in kernel (or without disabling it in kernel) I don't get the previous message: ahci0: device on port 1 didn't come ready, TFD: 0x150 but I still cant resume. I inline and attach full serial console transcript and ddb's dmesg, trace and ps. ideas? I highlight again that this machine worked in 5.3, so will still try to build some kernels/userland between 5.3 and 5.4, any idea how to make that faster? Thank you. >> OpenBSD/amd64 BOOT 3.28 boot> zx z /xoe bsd aoeu /bsd.sp -sc \|/-\|/booting sr0a:/bsd.sp: -\|/-7690684\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+2116940/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+1096160-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+0+612448 [100+554640/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+368743\|/-\|/-\|/-\|/-\|/-\|/]=0xfde300 entry point at 0x10001e0 [7205c766, 34000004, 24448b12, 4ca0a304] [ using 924320 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.5-current (GENERIC) #47: Thu Apr 3 16:28:31 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 17124126720 (16330MB) avail mem = 16659578880 (15887MB) User Kernel Config UKC> disable ahci* 63 ahci* disabled 64 ahci* disabled UKC> exit Continuing... mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xed070 (55 entries) bios0: vendor American Megatrends Inc. version "0901" date 11/24/2011 bios0: ASUSTeK COMPUTER INC. M5A97 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET IVRS SSDT acpi0: wakeup devices SBAZ(S4) PS2K(S3) PS2M(S3) UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Phenom(tm) II X4 955 Processor, 3211.10 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: AMD erratum 721 detected and fixed cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 200MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 21, 24 pins ioapic1 at mainbus0: apid 6 pa 0xfec20000, version 21, 32 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318180 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P0PC) acpiprt2 at acpi0: bus -1 (PE20) acpiprt3 at acpi0: bus -1 (PE21) acpiprt4 at acpi0: bus -1 (PE22) acpiprt5 at acpi0: bus -1 (PE23) acpiprt6 at acpi0: bus 1 (PC02) acpiprt7 at acpi0: bus 2 (PC04) acpiprt8 at acpi0: bus -1 (PC05) acpiprt9 at acpi0: bus -1 (PC06) acpiprt10 at acpi0: bus 3 (PC07) acpiprt11 at acpi0: bus -1 (PC09) acpiprt12 at acpi0: bus -1 (PC0A) acpiprt13 at acpi0: bus -1 (PC0B) acpiprt14 at acpi0: bus -1 (PC0C) acpiprt15 at acpi0: bus -1 (PC0D) acpiec0 at acpi0 acpicpu0 at acpi0: PSS acpibtn0 at acpi0: PWRB cpu0: 3211 MHz: speeds: 3200 2500 2100 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a14 rev 0x02 vendor "ATI", unknown product 0x5a23 (class system unknown subclass 0x06, rev 0x00) at pci0 dev 0 function 2 not configured ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility HD 5430" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi azalia0: no supported codecs ppb1 at pci0 dev 4 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL (0x2c80), msi, address c8:60:00:09:59:8e rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 ppb2 at pci0 dev 7 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci3 at ppb2 bus 3 "ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured pciide0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 5 int 19 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 20, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 21 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=15 0f=90 10=00 11=00 12=00 13=00 14=00 15=00 16=38 17=a4 18=c0 19=88 1a=00 1b=00 1c=00 1d=00 1e=0c 1f=03 20=09 21=09 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-10600 pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide1 channel 0 drive 0: <ST3500413AS> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd1 at pciide1 channel 0 drive 1: <ST3500413AS> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 wd1(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 5 int 16 azalia1: codecs: Realtek/0x0887 audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci4 at ppb3 bus 4 ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 5 int 18, version 1.0, legacy support ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 22, version 1.0, legacy support ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 23 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb3 at ohci0: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0x290 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb6 at ohci3: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 uhidev0 at uhub3 port 5 configuration 1 interface 0 "Microsoft Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd0: 476937MB, 512 bytes/sector, 976767473 sectors root on sd0a (a207e3a13f1838b4.a) swap on sd0b dump on sd0b Enter pathname of shell or RETURN for sh: [3g H H H H H H H H H# # # # # # cat /ro # cat /root/ # cat /root/ sysc my # cat /root/mysysctl # cat /root/mysysctl #!/bin/sh sysctl ddb.console=1 ddb.log=0 machdep.kbdreset=2 # sh -x /ro # sh -x /root/ # sh -x /root/ my # sh -x /root/mysysctl # sh -x /root/mysysctl + sysctl ddb.console=1 ddb.log=0 machdep.kbdreset=2 ddb.console: 0 -> 1 ddb.log: 1 -> 0 machdep.kbdreset: 0 -> 2 # # # # mount -uw / # apmd # Apr 13 19:31:31 apmd: battery status: absent. external power status: not known. estimated battery life 0% # # mount -ur / # wsmouse0 detached ums0 detached uhidev0 detached uhidev0 at uhub3 port 5 configuration 1 interface 0 "Microsoft Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 # # # # # # # # # # wsmouse0 detached ums0 detached uhidev0 detached # # # # # # # # # # mount /dev/sd0a on / type ffs (local, read-only) # zzz Suspending system... Apr 13 19:32:40 apmd: system suspending # uhub3 detached uhub0 detached uhub4 detached uhub1 detached uhub5 detached uhub6 detached uhub2 detached ~Stopped at Debugger+0x5: leave ddb> ddb> ddb> dmesg OpenBSD 5.5-current (GENERIC) #47: Thu Apr 3 16:28:31 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 17124126720 (16330MB) avail mem = 16659578880 (15887MB) User Kernel Config UKC> disable ahci* 63 ahci* disabled 64 ahci* disabled UKC> exit Continuing... mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xed070 (55 entries) bios0: vendor American Megatrends Inc. version "0901" date 11/24/2011 bios0: ASUSTeK COMPUTER INC. M5A97 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET IVRS SSDT acpi0: wakeup devices SBAZ(S4) PS2K(S3) PS2M(S3) UAR1(S4) P0PC(S4) UHC1(S4) UHC 2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) PE21(S4) PE22(S4) P E23(S4) [...] --db_more-- acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Phenom(tm) II X4 955 Processor, 3211.10 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C FLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3 DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEI D,ITSC cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 1 6-way L2 cache, 6MB 64b/line 48-way L3 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: AMD erratum 721 detected and fixed cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 200MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 21, 24 pins ioapic1 at mainbus0: apid 6 pa 0xfec20000, version 21, 32 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318180 Hz --db_more-- acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P0PC) acpiprt2 at acpi0: bus -1 (PE20) acpiprt3 at acpi0: bus -1 (PE21) acpiprt4 at acpi0: bus -1 (PE22) acpiprt5 at acpi0: bus -1 (PE23) acpiprt6 at acpi0: bus 1 (PC02) acpiprt7 at acpi0: bus 2 (PC04) acpiprt8 at acpi0: bus -1 (PC05) acpiprt9 at acpi0: bus -1 (PC06) acpiprt10 at acpi0: bus 3 (PC07) acpiprt11 at acpi0: bus -1 (PC09) acpiprt12 at acpi0: bus -1 (PC0A) acpiprt13 at acpi0: bus -1 (PC0B) acpiprt14 at acpi0: bus -1 (PC0C) acpiprt15 at acpi0: bus -1 (PC0D) acpiec0 at acpi0 acpicpu0 at acpi0: PSS acpibtn0 at acpi0: PWRB cpu0: 3211 MHz: speeds: 3200 2500 2100 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a14 rev 0x02 vendor "ATI", unknown product 0x5a23 (class system unknown subclass 0x06, rev 0 --db_more-- x00) at pci0 dev 0 function 2 not configured ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility HD 5430" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi azalia0: no supported codecs ppb1 at pci0 dev 4 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL (0x2c80 ), msi, address c8:60:00:09:59:8e rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 ppb2 at pci0 dev 7 function 0 "ATI SR5690 PCIE" rev 0x00: msi pci3 at ppb2 bus 3 "ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured pciide0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 5 int 19 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 18, versio n 1.0, legacy support --db_more-- ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 20, versio n 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 21 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b= 00 0c=00 0d=00 0e=15 0f=90 10=00 11=00 12=00 13=00 14=00 15=00 16=38 17=a4 18=c 0 19=88 1a=00 1b=00 1c=00 1d=00 1e=0c 1f=03 20=09 21=09 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-10600 pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 conf igured to compatibility, channel 1 configured to compatibility wd0 at pciide1 channel 0 drive 0: <ST3500413AS> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd1 at pciide1 channel 0 drive 1: <ST3500413AS> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 --db_more-- wd1(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 5 int 16 azalia1: codecs: Realtek/0x0887 audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci4 at ppb3 bus 4 ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 5 int 18, versio n 1.0, legacy support ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 5 int 22, versio n 1.0, legacy support ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 23 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb3 at ohci0: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 --db_more-- isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0x290 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb6 at ohci3: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 uhidev0 at uhub3 port 5 configuration 1 interface 0 "Microsoft Microsoft Basic O ptical Mouse v2.0" rev 1.10/1.04 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root --db_more-- scsibus2 at softraid0: 256 targets sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd0: 476937MB, 512 bytes/sector, 976767473 sectors root on sd0a (a207e3a13f1838b4.a) swap on sd0b dump on sd0b wsmouse0 detached ums0 detached uhidev0 detached uhidev0 at uhub3 port 5 configuration 1 interface 0 "Microsoft Microsoft Basic O ptical Mouse v2.0" rev 1.10/1.04 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev0 detached uhub3 detached uhub0 detached uhub4 detached uhub1 detached uhub5 detached uhub6 detached uhub2 detached ddb> trace Debugger() at Debugger+0x5 comintr() at comintr+0x253 Xintr_ioapic_edge4() at Xintr_ioapic_edge4+0xdc --- interrupt --- Bad frame pointer: 0xffff800022116d18 end trace frame: 0xffff800022116d18, count: -3 Xdoreti: ddb> Debugger() at Debugger+0x5 end trace frame: 0xffff800022116b28, count: 0 ddb> Debugger() at Debugger+0x5 end trace frame: 0xffff800022116b28, count: 0 ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 12420 1 12420 0 2 0 apmd 5665 1 5665 0 2 0x83 sh 16511 0 0 0 3 0x4200 aiodoned aiodoned 26815 0 0 0 3 0x4200 syncer update 19717 0 0 0 3 0x4200 cleaner cleaner 5000 0 0 0 3 0x4200 reaper reaper 6512 0 0 0 3 0x4200 pgdaemon pagedaemon 9546 0 0 0 3 0x4200 bored srdis 6630 0 0 0 3 0x4200 bored crypto 15804 0 0 0 3 0x4200 pftm pfpurge 31553 0 0 0 3 0x4200 bored sensors 29909 0 0 0 3 0x4200 usbtsk usbtask 29897 0 0 0 3 0x4200 usbatsk usbatsk * 3667 0 0 0 7 0x40004200 acpi0 27473 0 0 0 3 0x4200 bored systq 2433 0 0 0 3 0x4200 bored syswq 17836 0 0 0 3 0x40004200 idle0 1 0 1 0 3 0x82 wait init 0 -1 0 0 3 0x200 scheduler swapper ddb> ~ [EOT] # # ^D Script done on Sun Apr 13 19:35:05 2014
maetelnoahci
Description: Binary data
