On Tue, Aug 03, 2010 at 09:39:19PM -0400, Brad wrote:
> On Tuesday 03 August 2010 21:34:53 patrick keshishian wrote:
> > On Tue, Aug 03, 2010 at 11:05:16AM +0200, Mark Kettenis wrote:
> > > > X-Authentication-Warning: roppongi.boxsoft.com: sidster set sender to
> > > > sids...@boxsoft.com using -f Date: Tue, 3 Aug 2010 01:48:21 -0700
> > > > From: patrick keshishian <sids...@boxsoft.com>
> > > >
> > > > Greetings,
> > > >
> > > > I'm moving this discussion [1] from misc@ over here as
> > > > suggested by a openbsd developer.
> > > >
> > > > Summary: Noticed with a few snapshots that Xorg kept
> > > > crashing. Per Matthieu Herrb I built xenocara with
> > > > debug to get better info, but that made Xorg not crash.
> > > > Next building firefox-3.6.8 from ports kept crashing.
> > > >
> > > > I wrote a small program that called dlopen(3)/dlsym(3)
> > > > and it would exit with status code 20. Same sources
> > > > compiled on a 4.7 i386 ran as expected. Matthieu pointed
> > > > out that the problem was identified and fixed in a recent
> > > > commit [2].
> > > >
> > > > I rebuild kernel and userland after an update (picking
> > > > aforementioned commit). This solved neither ffox's nor
> > > > my test app's issue.
> > >
> > > The fix is in the compiler. Since ld.so gets built before the
> > > compiler, you'll actually have to rebuild userland twice for it to
> > > pick up the fix.
> >
> > Rebuild of userland for the second time results in the same
> > behavior: Random successes amongst many failures (=status 20
> > exits).
> >
> > Anything else I should try?
> > --patrick
>
> Try upgrading via a snapshot and go from there.
Same result.
--patrick
24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version
1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version
1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM100JC>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address
00:0a:95:b5:3a:e2
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhub6 at uhub5 port 1 "ALCOR Generic USB Hub" rev 1.10/3.14 addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Microsoft Corporation
Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub6 port 2 configuration 1 interface 0 "Rextron, Inc. USB K/M for
SUN" rev 1.10/1.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub6 port 2 configuration 1 interface 1 "Rextron, Inc. USB K/M for
SUN" rev 1.10/1.01 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
softraid0 at root
bootpath: /p...@f4000000/at...@d/d...@0:/bsd
root on wd0a swap on wd0b dump on wd0b
syncing disks... done
rebooting
[ using 454196 bytes of bsd ELF symbol table ]
console out [ATY,Via_A]console in [keyboard] USB and ADB found, using ADB
using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr
9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024
linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.8-beta (GENERIC) #84: Tue Aug 3 10:03:35 MDT 2010
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 671088640 (640MB)
avail mem = 637071360 (607MB)
mainbus0 at root: model PowerBook6,3
cpu0 at mainbus0: 7455 (Revision 0x303): 799 MHz: 256KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: no EEPROM found
spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5
memc0 at mainbus0: uni-n
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
adt0 at iic0 addr 0xae: adt7467 rev 0x71
"cy28512" at iic0 addr 0xe9 not configured
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address
00:0d:93:84:04:88
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x9 irq 47
pgs0 at macgpio0 offset 0x11: irq 55
"gpio4" at macgpio0 offset 0x1e not configured
"frequency-gpio" at macgpio0 offset 0x1a not configured
"voltage-gpio" at macgpio0 offset 0x1b not configured
"slewing-done" at macgpio0 offset 0x12 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 100% charged
piic0 at adb0
iic1 at piic0
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM TCR-241, WL15> ATAPI 5/cdrom
removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version
1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version
1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version
1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM100JC>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address
00:0a:95:b5:3a:e2
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhub6 at uhub5 port 1 "ALCOR Generic USB Hub" rev 1.10/3.14 addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Microsoft Corporation
Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub6 port 2 configuration 1 interface 0 "Rextron, Inc. USB K/M for
SUN" rev 1.10/1.01 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub6 port 2 configuration 1 interface 1 "Rextron, Inc. USB K/M for
SUN" rev 1.10/1.01 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
softraid0 at root
bootpath: /p...@f4000000/at...@d/d...@0:/bsd
root on wd0a swap on wd0b dump on wd0b
