On Sun, Nov 22, 2009 at 7:21 PM, Stuart Henderson <s...@spacehopper.org> wrote:
> This should be supported as of 2009/11/17, try a snapshot.
> Yes, the usbdevs output you included was useful - but in future
> please send a complete dmesg rather than an exert.
Thanks. I did a bsd.rd install from the latest i386 snapshot and the
device works fine. I ftp'ed the install sets and ports.tar.gz. No
problems. Below is the full dmesg. I also added the device to my
/usr/share/man/cat4/run.0 man page. I would submit a man page diff,
but I'm not sure how to properly do that. Here is what I added:
---------------------------------------
HARDWARE
The following adapters should work:
Airlink101 AWLL6090
ASUS USB-N11
+ ASUS USB-N13
ASUS WL-160N
Belkin F5D8051 ver 3000
---------------------------------------
OpenBSD 4.6-current (GENERIC.MP) #223: Mon Oct 5 21:21:24 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064595456 (1015MB)
avail mem = 1023062016 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/19/09, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfc6f0 (17 entries)
bios0: vendor Hewlett-Packard version "308F0 Ver. F.07" date 06/18/2009
bios0: Hewlett-Packard HP Mini 110-1000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET ASF! SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S4) USB1(S4)
USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P8)
acpiprt6 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpibat0 at acpi0: BAT1 model "Primary" serial type LION oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 16 (irq 10)
azalia0: codecs: IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2
int 16 (irq 10)
pci1 at ppb0 bus 1
"Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2
int 17 (irq 11)
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic
2 int 17 (irq 11), address 00:25:b3:7d:8a:eb
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2
int 18 (irq 14)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HI>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
2 int 19 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "D-MAX USB Video
Device" rev 2.00/2.13 addr 2
video0 at uvideo0
rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:26:18:87:da:ba
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ehci_idone: ex=0xd1da5c00 is done!
rum0 detached
syncing disks...
OpenBSD 4.6-current (RAMDISK_CD) #245: Sat Nov 21 05:21:03 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064595456 (1015MB)
avail mem = 1024671744 (977MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/19/09, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfc6f0 (17 entries)
bios0: vendor Hewlett-Packard version "308F0 Ver. F.07" date 06/18/2009
bios0: Hewlett-Packard HP Mini 110-1000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET ASF! SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P8)
acpiprt6 at acpi0: bus -1 (P0P9)
bios0: ROM list: 0xc0000/0xec00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2
int 16 (irq 10)
pci1 at ppb0 bus 1
"Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2
int 17 (irq 11)
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic
2 int 17 (irq 11), address 00:25:b3:7d:8a:eb
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2
int 18 (irq 14)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HI>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
"D-MAX USB Video Device" rev 2.00/2.13 addr 2 at uhub0 port 4 not configured
run0 at uhub0 port 7 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
run0: MAC/BBP RT3071 (rev 0x0212), RF RT3022 (MIMO 2T2R), address
00:26:18:c4:f8:bc
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 4.6-current (GENERIC.MP) #313: Sat Nov 21 05:14:38 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064595456 (1015MB)
avail mem = 1022881792 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/19/09, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfc6f0 (17 entries)
bios0: vendor Hewlett-Packard version "308F0 Ver. F.07" date 06/18/2009
bios0: Hewlett-Packard HP Mini 110-1000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET ASF! SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S4) USB1(S4)
USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P8)
acpiprt6 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpibat0 at acpi0: BAT1 model "Primary" serial type LION oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 16 (irq 10)
azalia0: codecs: IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2
int 16 (irq 10)
pci1 at ppb0 bus 1
"Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2
int 17 (irq 11)
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic
2 int 17 (irq 11), address 00:25:b3:7d:8a:eb
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2
int 18 (irq 14)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HI>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
2 int 19 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "D-MAX USB Video
Device" rev 2.00/2.13 addr 2
video0 at uvideo0
run0 at uhub0 port 7 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
run0: MAC/BBP RT3071 (rev 0x0212), RF RT3022 (MIMO 2T2R), address
00:26:18:c4:f8:bc
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
