On Thu, 2009-06-11 at 01:06 -0400, Brad wrote:
> Please test the following diff for brgphy(4), especially for bge(4).
> Also for bnx(4) and gem(4), any other NICs if I've forgotten any.
Seems to be working fine.
> Please send a full dmesg.
OpenBSD 4.5-current (GENERIC) #0: Thu Jun 11 14:05:05 CST 2009
r...@via:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 938213376 (894MB)
avail mem = 898895872 (857MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfb7e0 (47 entries)
bios0: vendor American Megatrends Inc. version "1.0A-0008-0523" date
02/26/2009
bios0: iDOT Computers, Inc. iDOT VED8900 Series.
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices PS2K(S3) PS2M(S3) P0P4(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: VIA Nano processor u1...@1000+mhz, 1296.94 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,CX16,xTPR,NXE,FFXSR,LONG
cpu0: 64KB 64b/line 16-way I-cache, 64KB 64b/line 16-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 128 4KB entries 8-way
cpu0: DTLB 128 4KB entries 8-way
cpu0: RNG AES AES-CTR SHA1 SHA256
cpu0: apic clock running at 203MHz
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0 apid 2 pa 0xfecc0000, version 3, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P4)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, PSS
acpitz0 at acpi0: critical temperature 94 degC
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: LID_
acpibat0 at acpi0: BAT0 model "NBP3A62-3S1P" serial 093E type Li-ion
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 1100, 1000, 900,
800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "VIA VX800 Host" rev 0x12
pchb1 at pci0 dev 0 function 1 "VIA VX800 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA VX800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA VX800 DRAM" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA VX800 Host" rev 0x00
"VIA VX800 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA VX800 Host" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA VX800 Host" rev 0x00
vga1 at pci0 dev 1 function 0 "VIA Chrome9 HC3 IGP" rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sdhc0 at pci0 dev 12 function 0 "VIA VX800 SDIO" rev 0x10: apic 1 int 22
(irq 11)
sdmmc0 at sdhc0
sdmmc1 at sdhc0
"VIA VX800 SD/MMC" rev 0x00 at pci0 dev 13 function 0 not configured
pciide0 at pci0 dev 15 function 0 "VIA CX700 IDE" rev 0x00: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST9160310AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: apic 1 int
20 (irq 11)
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: apic 1 int
22 (irq 7)
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: apic 1 int
21 (irq 6)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VX800 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pchb7 at pci0 dev 17 function 7 "VIA VX800 Host" rev 0x00
ppb0 at pci0 dev 19 function 0 "VIA VX800 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
bge0 at pci1 dev 5 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3
(0x3003): apic 1 int 18 (irq 6), address 00:1e:33:17:f0:4f
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
azalia0 at pci0 dev 20 function 0 "VIA HD Audio" rev 0x20: apic 1 int 17
(irq 7)
azalia0: codecs: Realtek ALC262
audio0 at azalia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Importek Corp.
Importek Web Cam" rev 2.00/1.00 addr 2
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Kevin
