Please open a RFE https://github.com/systemd/systemd.
Susant On Tue, May 7, 2019 at 6:24 PM Arnaud Lemaire <[email protected]> wrote: > > Hi there, > > I'm trying to set up network multipath routing with systemd, but I cannot > find a way to do it cleanly. > > The part that I cannot set up is : > ``` > $ ip route > default > nexthop via 192.168.11.1 dev inet.11 weight 5 > nexthop via 192.168.22.2 dev inet.22 weight 10 > ... > ``` > > I'm getting around it with this unit: > $ cat /etc/systemd/system/multipath-routing.service > [Unit] > Description=Setup default gateway multipath routing > After=network-online.target > Wants=network-online.target > > [Service] > Type=oneshot > RemainAfterExit=yes > ExecStart=-/usr/bin/ip route del default > ExecStart=/usr/bin/ip route add default nexthop via 192.168.11.1 dev inet.11 > weight 5 nexthop via 192.168.22.2 dev inet.22 weight 10 > > [Install] > WantedBy=network-online.target > ``` > > And it's working, but as soon as I unplug the network cable and plug it back, > the routes are gone > and the unit is not triggered > > I tried with a WantedBy on the `sys-subsystem-net-devices-eno1.device` but > it's not working since it seems to act on the device and not on the link. > > Can someone give me an hint on how to do it ? > > -- > Arnaud LEMAIRE > _______________________________________________ > systemd-devel mailing list > [email protected] > https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Susant _______________________________________________ systemd-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/systemd-devel
