Hi Zbyszek,
Thanks for all your help! This is a new concept to me though, as I have never tried to refer to a process inside of a container from outside of the container before (I did not realize this was possible). Since specifying PID 1 would obviously be referring to the host system's init process, would you be willing to give me an example that might help me understand how I can specify an in-container PID from the host system? Thanks again for taking the time to help me grasp all of this :) > On Sep 25, 2014, at 2:10 PM, Zbigniew Jędrzejewski-Szmek <[email protected]> > wrote: > >> On Thu, Sep 25, 2014 at 10:40:42AM -0700, James Lott wrote: >> Hi Mantas, >> >> Thanks for the clarification. The first thing I tried actually was using the >> PID >> of the systemd-nspawn instance, like so >> >> [root@host01 lanvpn]# ps aux | grep -v grep | grep systemd-nspawn >> root 143 0.0 0.3 2884 728 ? Ss 08:42 0:00 >> /usr/bin/systemd-nspawn --network-bridge=switch1 -bD /home/proxy -M 0 >> root 4564 0.7 0.6 2884 1124 pts/3 S+ 10:38 0:00 systemd- >> nspawn --private-network >> [root@host01 lanvpn]# iw phy phy0 set netns 4564 > > systemd-nspawn is *outside* of the container. You should use the child of > systemd-nspawn, i.e. the init process, instead. > > Zbyszek _______________________________________________ systemd-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/systemd-devel
