On 09 January, 2015 - Willem Ferguson wrote: > This patch implements the visualisation of the oxygen sensor data for CCR > dives. The partial pressure measurements of each of the sensors are graphed > using the existing partial pressure axis in the dive profile widget. There > are now four separate sets of data that can be plotted using the partial > pressure axis system: po2, pn2, phe, and this additional one: sensor data. > The sensor data can be visualised individually or in combination with > any of the other three partial pressure graphs, mentioned above. The display > of the sensor data is activated by the button at the bottom of the toolbar, > allowing the evaluation of data from individual oxygen sensors with respect > to drift or fluctuation and with respect to the setpoint setting, these > being important criteria for evaluating the reliability of these sensors > for a particular set of CCR equipment. It is a feature that many > implementations of proprietary CCR dive logs have. >
I've bin thinking if this is a good idea to plot in our already massive plot. I'm more leaning towards just plotting a computed po2 value here, and the setpoint of course, and then rather add a some sort of separate tool to analyze the o2 cells, and how they correlate to each other, outside the general dive plot. I think thats going to be a way more useful tool. //Anton -- Anton Lundin +46702-161604 _______________________________________________ subsurface mailing list [email protected] http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
