Chris Hilts said: >> I grabbed a large folder from a user's mailbox and used it for >> testing. The test folder has 2026 messages, is 170 MB large, and >> takes approximately 30 seconds from initial mailbox click to final >> html render. I'm using courier imap server with maildir. > > Make sure you have server-side sorting and server-side threading > enabled in conf.pl, assuming Courier supports both. (I believe it > does..)
I have both server-side sorting and server-side threading enabled. I did some further testing. For comparison purposes I have a mid-sized mailbox with 595 messages that's 5 MB large and takes 4-5 seconds to load. I have one folder with 17 messages in it at 11 MB each for a total of 203 MB. From the click on the folder name to the display of the messages takes ten seconds plus three seconds for the "page load throbber" in galeon to stop. I have one folder with 60000 (60K) messages in it at .3 K each for a total of 248 MB. From the click on the folder name to the display of the messages takes 99 seconds plus 7 seconds for the throbber to stop. I also see a message at the bottom of my page "Fatal error: Maximum execution time of 60 seconds exceeded in Unknown on line 0". So it seems large messages incur some overhead, but the biggest overhead is caused by a large message count. Both of these factors are of concern for my user with the large folder above (2026 messages, 170 MB). Is there any way to speed this up? Is anyone able to get these kinds of message counts and/or folder sizes without significant penalties in folder load and display times? -- Kurt Yoder Sport & Health network administrator ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf -- squirrelmail-users mailing list List Address: [EMAIL PROTECTED] List Archives: http://sourceforge.net/mailarchive/forum.php?forum_id=2995 List Info: https://lists.sourceforge.net/lists/listinfo/squirrelmail-users
