Re: kernel 6.13.x usb wifi problems

Am 21.03.2025 um 12:21:37 Uhr schrieb Robert McBroom via users: > What does it mean that the RTL8812AU device is seen but not enabled? Check if the kernel module is being loaded. lsusb -t -- Gruß Marco Send unsolicited bulk mail to 1742556097mu...@cartoonies.org --

Re: kernel 6.13.x usb wifi problems

On 3/22/25 7:31 AM, George N. White III wrote: On Fri, Mar 21, 2025 at 1:22 PM Robert McBroom via users wrote: Have two usb wifi adapters using Realtek chips that were noted to be supported in the recent kernels. One is now seen but the other is not. Both show in the list from lsusb Bus

Re: kernel 6.13.x usb wifi problems

On Fri, Mar 21, 2025 at 1:22 PM Robert McBroom via users wrote: > > Have two usb wifi adapters using Realtek chips that were noted to be > supported in the recent kernels. One is now seen but the other is not. Both > show in the list from > > lsusb > > Bus 001 Device 0

kernel 6.13.x usb wifi problems

Have two usb wifi adapters using Realtek chips that were noted to be supported in the recent kernels. One is now seen but the other is not. Both show in the list from lsusb Bus 001 Device 002: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter Bus 001

Virtual Machine USB WIFI adapter

Fedora 38 host with CentOS8 in a virtual machine. Wrestling with networking. I would like to use a USB WIFI adapter dedicated to the virtual machine. The adapter works from the host. When added to the hardware of the virtual machine it is seen by NetworkManager but entering the SSID and

Re: Drivers for Realtec USB wifi adapters

On 3/3/23 23:28, Robert McBroom via users wrote: > Saw those from an earlier response and they have worked on updates to present. > The readme notes that the drivers ae expected to be in the 6.2 kernel. > > Waiting expectantly Yep, looks like at least the 88x2bu driver is now. I happened to see i

Re: Drivers for Realtec USB wifi adapters

On 2/28/23 23:04, Slade Watkins via users wrote: On 2/23/23 12:30, Robert McBroom via users wrote: I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while I tracked driver updates on git with varying degrees of success. Haven't seen anything since the 5.6 kernels. Ther

Re: Drivers for Realtec USB wifi adapters

On 2/23/23 12:30, Robert McBroom via users wrote: > I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a > while I tracked driver updates on git with varying degrees of success. > Haven't seen anything since the 5.6 kernels. There was some note about a > general

Re: Drivers for Realtec USB wifi adapters

On 2/24/23 04:45, t_pol wrote: On Thu, 23 Feb 2023 12:30:21 -0500 Robert McBroom via users wrote: I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while I tracked driver updates on git with varying degrees of success. Haven't seen anything since the 5.6 kernels.

Re: Drivers for Realtec USB wifi adapters

On 2/24/23 04:45, t_pol wrote: On Thu, 23 Feb 2023 12:30:21 -0500 Robert McBroom via users wrote: I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while I tracked driver updates on git with varying degrees of success. Haven't seen anything since the 5.6 kernels.

Re: Drivers for Realtec USB wifi adapters

On Thu, 23 Feb 2023 12:30:21 -0500 Robert McBroom via users wrote: > I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a > while I tracked driver updates on git with varying degrees of success. > Haven't seen anything since the 5.6 kernels. There was som

Re: Drivers for Realtec USB wifi adapters

On Thu, Feb 23, 2023 at 11:30 AM Robert McBroom via users wrote: > > I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while > I tracked driver updates on git with varying degrees of success. Haven't seen > anything since the 5.6 kernels. There was

Re: Drivers for Realtec USB wifi adapters

On Thu, Feb 23, 2023 at 12:30 PM Robert McBroom via users wrote: > > I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while > I tracked driver updates on git with varying degrees of success. Haven't seen > anything since the 5.6 kernels. There was

Drivers for Realtec USB wifi adapters

I have two Realtec USB wifi adapters an rtl8812au and rtl8822bu. For a while I tracked driver updates on git with varying degrees of success. Haven't seen anything since the 5.6 kernels. There was some note about a generalized driver but I don't see anything in ../kernel/drivers o

Re: USB WIFI adapters

On Wed, 2019-10-30 at 14:42 -0400, Tom Horsley wrote: > Especially since the manufacturers often switch chipsets > without changing the model number :-(. That used to be a real pain on the few short years that I dabbled with Windows. You'd buy some hardware, it'd come with a CD-ROM packed full of

Re: USB WIFI adapters

On Wed, 30 Oct 2019 08:45:51 -0500 Roger Heflin wrote: > It is a mess on the usb adaptors. Especially since the manufacturers often switch chipsets without changing the model number :-(. ___ users mailing list -- users@lists.fedoraproject.org To unsubsc

Re: USB WIFI adapters

of updated sources code has came from a new source, so keeping it working is not trivial. On Tue, Oct 29, 2019 at 11:44 PM Robert McBroom via users wrote: > > I've been searching for a USB WIFI adapter to allow my laptop to access > the 5GHz band. The market seems to be dominated by Realtek

USB WIFI adapters

I've been searching for a USB WIFI adapter to allow my laptop to access the 5GHz band. The market seems to be dominated by Realtek but Fedora 29 doesn't seem to have drivers for the various chips. Found an adapter from BrosTrend that said it supported LINUX without noticing that th

Re: USB WiFi broken after F27 to F28 upgrade

Mine that failed (in dmesg) was the Intel Wifi built into a P50 Thinkpad. It's only a kernel issue for me as I can just boot the F27 kernel and everything still works (so likely unrelated to your issue.) I hadn't considered using a USB wifi device to see if other wifi nics have the

Re: USB WiFi broken after F27 to F28 upgrade

Had a similar issue. Haven't found a solution yet. On Sun, Jul 8, 2018 at 9:15 AM, Shawn Badger wrote: > The USB WiFi adapter was working fine in F27 but after upgrading to F28 I > can not longer connect to the same SSID I was connected to before, or any > for that manner. I am u

USB WiFi broken after F27 to F28 upgrade

The USB WiFi adapter was working fine in F27 but after upgrading to F28 I can not longer connect to the same SSID I was connected to before, or any for that manner. I am using a Realtek RTL8191SU based adapter that has worked well for me for years. NetworkManager just keeps asking for the

Re: unable to bring up mediatek usb wifi dongle

On 21 February 2018 at 13:37, JD wrote: > > > Can anyone suggest a wifi 300 or 600 mbps usb dongle that will work > with multiple fedora machines ranging from fc18 to fc27 ? > Thanx! Do you really need a wifi dongle or could you use a wifi extender with ethernet cables?In my experience ,

Re: unable to bring up mediatek usb wifi dongle

On 02/21/2018 11:16 AM, George N. White III wrote: On 21 February 2018 at 13:37, JD > wrote: Can anyone suggest a wifi 300 or 600 mbps usb dongle that will work with multiple fedora machines ranging from fc18 to fc27 ? Thanx! Do you really need a wifi

Re: unable to bring up mediatek usb wifi dongle

On 02/21/2018 06:23 AM, George N. White III wrote: On 20 February 2018 at 22:17, JD <mailto:jd1...@gmail.com>> wrote: Tried to bring up a mediateck usb wifi stick with a built-in antenna. $ dmesg | grep 'usb 1-1' [ 3632.100121] usb 1-1: new high-speed USB dev

Re: unable to bring up mediatek usb wifi dongle

On 02/21/2018 10:18 AM, JD wrote: On 02/21/2018 07:41 AM, jarmo wrote: Wed, 21 Feb 2018 09:23:49 -0400 "George N. White III" kirjoitti: There seem to be lots of "MediaTeK 7610" dongles with various chips inside. You could try adding your USB id to the list of devices supported by the rt

Re: unable to bring up mediatek usb wifi dongle

On 21 February 2018 at 10:41, jarmo wrote: > Wed, 21 Feb 2018 09:23:49 -0400 > "George N. White III" kirjoitti: > > > > There seem to be lots of "MediaTeK 7610" dongles with various chips > > inside. You could try > > adding your USB id to the list of devices supported by the rt2800usb > > modu

Re: unable to bring up mediatek usb wifi dongle

Wed, 21 Feb 2018 09:23:49 -0400 "George N. White III" kirjoitti: > There seem to be lots of "MediaTeK 7610" dongles with various chips > inside. You could try > adding your USB id to the list of devices supported by the rt2800usb > module: > > https://forums.fedoraforum.org/showthread.php?3095

Re: unable to bring up mediatek usb wifi dongle

On 20 February 2018 at 22:17, JD wrote: > Tried to bring up a mediateck usb wifi stick with a built-in antenna. > > $ dmesg | grep 'usb 1-1' > [ 3632.100121] usb 1-1: new high-speed USB device number 13 using xhci_hcd > [ 3633.314114] usb 1-1: new high-speed USB device

unable to bring up mediatek usb wifi dongle

Tried to bring up a mediateck usb wifi stick with a built-in antenna. $ dmesg | grep 'usb 1-1' [ 3632.100121] usb 1-1: new high-speed USB device number 13 using xhci_hcd [ 3633.314114] usb 1-1: new high-speed USB device number 14 using xhci_hcd [ 3633.446949] usb 1-1: New USB de

Re: usb wifi dongle for f27

On 01/20/18 07:47, George N. White III wrote: > > From README.md at the above link: > > > Installation instruction > > You can find |<>| using |lspci | grep Wireless|.  > Of course the lspci command is for HW on the PCI Bus.  Not USB.   You could use lsusb instead.  -- Fedora Users Lis

Re: usb wifi dongle for f27

On 19 January 2018 at 15:45, JD wrote: > > > On 01/19/2018 05:56 AM, George N. White III wrote: > >> On 18 January 2018 at 21:41, JD > jd1...@gmail.com>> wrote: >> >> >> Well, plugging it in, and running dmesg, I see >> >> [371723.353041] usb 4-1: new high-speed USB device number 27 using

Re: usb wifi dongle for f27

On 01/19/2018 05:56 AM, George N. White III wrote: On 18 January 2018 at 21:41, JD > wrote: Well, plugging it in, and running dmesg, I see [371723.353041] usb 4-1: new high-speed USB device number 27 using ehci-pci [371723.865025] usb 4-1: device not

Re: usb wifi dongle for f27

On 01/19/2018 02:53 AM, Joost wrote: My dmesg shows: [78982.428363] usb 3-4: new high-speed USB device number 3 using xhci_hcd [78982.555490] usb 3-4: New USB device found, idVendor=0bda, idProduct=8178 [78982.555497] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [78982.5

Re: usb wifi dongle for f27

On 18 January 2018 at 21:41, JD wrote: > > > Well, plugging it in, and running dmesg, I see > > [371723.353041] usb 4-1: new high-speed USB device number 27 using ehci-pci > [371723.865025] usb 4-1: device not accepting address 27, error -71 > [371724.160043] usb 8-1: new full-speed USB device num

Re: usb wifi dongle for f27

My dmesg shows: [78982.428363] usb 3-4: new high-speed USB device number 3 using xhci_hcd [78982.555490] usb 3-4: New USB device found, idVendor=0bda, idProduct=8178 [78982.555497] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [78982.01] usb 3-4: Product: USB WLAN [78982.55

Re: usb wifi dongle for f27

On 01/15/2018 09:45 AM, Joost wrote: My tp-link TL-WN823N works on F27 out-of-the-box. It's 2.4GHz only and costs about 13 €. On Sun, Jan 14, 2018 at 8:20 PM, JD > wrote: On 01/14/2018 10:42 AM, Tom Horsley wrote: On Sun, 14 Jan 2018 10:11:57 -0700

Re: usb wifi dongle for f27

Thanx. Will try it. On 01/15/2018 09:45 AM, Joost wrote: tp-link TL-WN823N ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org

Re: usb wifi dongle for f27

My tp-link TL-WN823N works on F27 out-of-the-box. It's 2.4GHz only and costs about 13 €. On Sun, Jan 14, 2018 at 8:20 PM, JD wrote: > > > On 01/14/2018 10:42 AM, Tom Horsley wrote: > >> On Sun, 14 Jan 2018 10:11:57 -0700 >> JD wrote: >> >> Could you or someone list some chipsets (even legacy one

Re: usb wifi dongle for f27

On 01/14/2018 10:42 AM, Tom Horsley wrote: On Sun, 14 Jan 2018 10:11:57 -0700 JD wrote: Could you or someone list some chipsets (even legacy ones) that are very likely fully supported by f27 distribution iso right out of the box.\ Well, I've got this one in my F27 desktop at work providing w

Re: usb wifi dongle for f27

On 01/14/2018 11:06 AM, fred roller wrote: On Sun, Jan 14, 2018 at 12:42 PM, Tom Horsley > wrote: On Sun, 14 Jan 2018 10:11:57 -0700 JD wrote: > Could you or someone list some chipsets (even legacy ones) > that are very likely fully supported b

Re: usb wifi dongle for f27

On Sun, Jan 14, 2018 at 12:42 PM, Tom Horsley wrote: > On Sun, 14 Jan 2018 10:11:57 -0700 > JD wrote: > > > Could you or someone list some chipsets (even legacy ones) > > that are very likely fully supported by f27 distribution iso > > right out of the box.\ > > Well, I've got this one in my F27

Re: usb wifi dongle for f27

On Sun, 14 Jan 2018 10:11:57 -0700 JD wrote: > Could you or someone list some chipsets (even legacy ones) > that are very likely fully supported by f27 distribution iso > right out of the box.\ Well, I've got this one in my F27 desktop at work providing wifi for my phone and tablet acting as an a

Re: usb wifi dongle for f27

On 01/14/2018 10:06 AM, Tom Horsley wrote: On Sun, 14 Jan 2018 09:39:27 -0700 JD wrote: Which chipset will work for a usb wifi dongle without having to go through the rigmarole of finding proprietary drivers and firmware? The odds are good that any random dongle will work OK. Things have

Re: usb wifi dongle for f27

On Sun, 14 Jan 2018 09:39:27 -0700 JD wrote: > Which chipset will work for a usb wifi dongle without having to go > through the rigmarole of finding proprietary drivers and firmware? The odds are good that any random dongle will work OK. Things have gotten a lot better than they used to b

usb wifi dongle for f27

Which chipset will work for a usb wifi dongle without having to go through the rigmarole of finding proprietary drivers and firmware? I would like it to work right out of the box, without having to first run updates. Thanx! ___ users mailing list

Re: Networkmanager Refuses to use my Dlink DWA-192 USB Wifi Device in F24 [Resolved]

aware of the naming conventions for the device identifiers, so I was not aware that wlp4s6 was not my USB wifi adapter. So I have been trying all this time to get the 5GHz channel working on wlp4s6 because of this misunderstanding when in reality that device doesn't have a 5 GHz channel. The

Re: Networkmanager Refuses to use my Dlink DWA-192 USB Wifi Device in F24 [Resolved]

I was not aware of >>> the naming conventions for the device identifiers, so I was not aware >>> that wlp4s6 was not my USB wifi adapter. So I have been trying all this >>> time to get the 5GHz channel working on wlp4s6 because of this >>> misunderstanding when i

Re: Networkmanager Refuses to use my Dlink DWA-192 USB Wifi Device in F24 [Resolved]

wlp4s6 was not my USB wifi adapter. So I have been trying all this time to get the 5GHz channel working on wlp4s6 because of this misunderstanding when in reality that device doesn't have a 5 GHz channel. The whole reason for my USB wifi adapter not being used was because I needed to downloa

Re: Networkmanager Refuses to use my Dlink DWA-192 USB Wifi Device in F24 [Resolved]

s not my USB wifi adapter. So I have been trying all this > time to get the 5GHz channel working on wlp4s6 because of this > misunderstanding when in reality that device doesn't have a 5 GHz channel. > The whole reason for my USB wifi adapter not being used was because I > needed to

Re: Networkmanager Refuses to use my Dlink DWA-192 USB Wifi Device in F24 [Resolved]

hat works, I'm not sure where to go. You can contact me off-list if you want further help as this topic's been going on for a while and I'm sure others are getting tired of it. It has subsequently turned out that wlp4s6 was an old pci wifi card that I still had in my machine that I t

Re: Networkmanager Will not Start the Network at Boot Time on 5Ghz Channel on USB Wifi Adapter

On 06.02.2017 11:33, poma wrote: > On 05.02.2017 21:45, Stephen Morris wrote: >> On 05/02/2017 00:28, poma wrote: >>> ping >> Sorry, I'm a little confused by what this response means? >> > > Destination message Unreachable > > https://lists.fedoraproject.org/archives/list/users@lists.fedoraprojec

Re: Networkmanager Will not Start the Network at Boot Time on 5Ghz Channel on USB Wifi Adapter

On 05.02.2017 21:45, Stephen Morris wrote: > On 05/02/2017 00:28, poma wrote: >> ping > Sorry, I'm a little confused by what this response means? > Destination message Unreachable https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/thread/IS7D5ZEP2JBGGMG2AH4Q7PHQEALWGY4D/

Re: Networkmanager Will not Start the Network at Boot Time on 5Ghz Channel on USB Wifi Adapter

On 05/02/2017 00:28, poma wrote: ping Sorry, I'm a little confused by what this response means? regards, Steve ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org _

Re: Networkmanager Will not Start the Network at Boot Time on 5Ghz Channel on USB Wifi Adapter

ping ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org

Networkmanager Will not Start the Network at Boot Time on 5Ghz Channel on USB Wifi Adapter

Hi, Following compiling the kernel driver for an rtl8814au chipset to get networking working on my DWA-192 usb wifi adapter, I have found that if I configure Networkmanager to use the 5Ghz channel and set the option "Automatically connect when available" which sets "ONB

Re: Fedora 25 USB WiFi plug and play recommendations

On 3/2/17 8:58 pm, cen wrote: Hello Any recommendations from community which USB WiFi card to buy that just works with F25? I have BCM4352 but need UEFI (Win10 dual boot) so it's unusable. Again, plug&play, no messing around with kernel and drivers. I have a Dlink DWA-192 usb wif

Fedora 25 USB WiFi plug and play recommendations

Hello Any recommendations from community which USB WiFi card to buy that just works with F25? I have BCM4352 but need UEFI (Win10 dual boot) so it's unusable. Again, plug&play, no messing around with kernel and drivers. ___ users mai

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 21/01/2017 10:21, Rick Stevens wrote: On 01/20/2017 02:39 PM, Stephen Morris wrote: On 20/01/2017 08:42, Rick Stevens wrote: On 01/19/2017 12:40 PM, Stephen Morris wrote: On 19/1/17 6:15 pm, Joe Zeff wrote: On 01/18/2017 11:53 PM, Stephen Morris wrote: I've checked the KEY_MGMT value and

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/20/2017 02:39 PM, Stephen Morris wrote: > On 20/01/2017 08:42, Rick Stevens wrote: >> On 01/19/2017 12:40 PM, Stephen Morris wrote: >>> On 19/1/17 6:15 pm, Joe Zeff wrote: On 01/18/2017 11:53 PM, Stephen Morris wrote: > I've checked the KEY_MGMT value and it matches the entry in the

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 20/01/2017 08:42, Rick Stevens wrote: On 01/19/2017 12:40 PM, Stephen Morris wrote: On 19/1/17 6:15 pm, Joe Zeff wrote: On 01/18/2017 11:53 PM, Stephen Morris wrote: I've checked the KEY_MGMT value and it matches the entry in the associated keys file. I've also added the two WPA_ALLOW keys

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/19/2017 12:40 PM, Stephen Morris wrote: > On 19/1/17 6:15 pm, Joe Zeff wrote: >> On 01/18/2017 11:53 PM, Stephen Morris wrote: >>> I've checked the KEY_MGMT value and it matches the entry in the >>> associated keys file. >>> I've also added the two WPA_ALLOW keys but they have made no differe

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 19/1/17 6:15 pm, Joe Zeff wrote: On 01/18/2017 11:53 PM, Stephen Morris wrote: I've checked the KEY_MGMT value and it matches the entry in the associated keys file. I've also added the two WPA_ALLOW keys but they have made no difference to NM acknowledging that the device can be connected to.

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/18/2017 11:53 PM, Stephen Morris wrote: I've checked the KEY_MGMT value and it matches the entry in the associated keys file. I've also added the two WPA_ALLOW keys but they have made no difference to NM acknowledging that the device can be connected to. Do you have any way of testing the

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 19/1/17 10:22 am, Rick Stevens wrote: On 01/18/2017 01:21 PM, Stephen Morris wrote: On 19/1/17 3:43 am, Rick Stevens wrote: On 01/18/2017 01:54 AM, Stephen Morris wrote: On 18/1/17 7:44 am, Terry Polzin wrote: In my experience, you won't get any further than lsusb "seeing" the device if yo

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/18/2017 01:21 PM, Stephen Morris wrote: > On 19/1/17 3:43 am, Rick Stevens wrote: >> On 01/18/2017 01:54 AM, Stephen Morris wrote: >>> On 18/1/17 7:44 am, Terry Polzin wrote: In my experience, you won't get any further than lsusb "seeing" the device if you haven't the firmware. It

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 19/1/17 3:43 am, Rick Stevens wrote: On 01/18/2017 01:54 AM, Stephen Morris wrote: On 18/1/17 7:44 am, Terry Polzin wrote: In my experience, you won't get any further than lsusb "seeing" the device if you haven't the firmware. It may be blacklisted. How do I determine if it or wifi has bee

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/18/2017 01:54 AM, Stephen Morris wrote: > On 18/1/17 7:44 am, Terry Polzin wrote: >> In my experience, you won't get any further than lsusb "seeing" the >> device if you haven't the firmware. It may be blacklisted. > How do I determine if it or wifi has been blacklisted? On reflecting on > t

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 18/1/17 7:44 am, Terry Polzin wrote: In my experience, you won't get any further than lsusb "seeing" the device if you haven't the firmware. It may be blacklisted. How do I determine if it or wifi has been blacklisted? On reflecting on this issue there is a possibility that I may have manual

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

tem so it gets loaded even if the system can't automatically associate that device with that driver. The only difference between the last time I used the wifi device (which was probably 6 months ago, I've been using an ethernet 'Home Plug' device) and now is that I have put on

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

ot; only returns "up" >> interfaces. If you want to see ALL of them, you must use "ifconfig -a". >> >> Now, with all that being said, if you don't have an appropriate driver >> or firmware for the device, the "iw dev" or "ifconf

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

In my experience, you won't get any further than lsusb "seeing" the device if you haven't the firmware. It may be blacklisted. On Tue, Jan 17, 2017 at 4:20 PM, Stephen Morris wrote: > On 18/1/17 6:50 am, Terry Polzin wrote: > >> Is the device firmware getting loaded? >> > Thanks Terry. At the m

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 18/1/17 6:50 am, Terry Polzin wrote: Is the device firmware getting loaded? Thanks Terry. At the moment I'm not sure. This device used to work so I am assuming the firmware is being loaded, but at the moment I'm not sure if the firmware extensions package has been uninstalled for some reason

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

The only difference between the last time I used the wifi device (which was probably 6 months ago, I've been using an ethernet 'Home Plug' device) and now is that I have put on multiple system upgrades for F24, plus at the moment I don't know whether the issue is NetworkManag

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

Is the device firmware getting loaded? On Tue, Jan 17, 2017 at 3:38 PM, Stephen Morris wrote: > On 17/1/17 7:49 am, Rick Stevens wrote: > >> On 01/16/2017 12:22 PM, Joe Zeff wrote: >> >>> On 01/16/2017 12:17 PM, Stephen Morris wrote: >>> I am using kde at the moment and I have cut and paste

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 17/1/17 7:49 am, Rick Stevens wrote: On 01/16/2017 12:22 PM, Joe Zeff wrote: On 01/16/2017 12:17 PM, Stephen Morris wrote: I am using kde at the moment and I have cut and pasted the wifi password back into the Networkmanager definition, and had the new password stored in Kwallet, but Network

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/16/2017 12:22 PM, Joe Zeff wrote: > On 01/16/2017 12:17 PM, Stephen Morris wrote: >> I am using kde at the moment and I have cut and pasted the wifi password >> back into the Networkmanager definition, and had the new password stored >> in Kwallet, but Networkmanager still refuses to recogniz

Re: Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

On 01/16/2017 12:17 PM, Stephen Morris wrote: I am using kde at the moment and I have cut and pasted the wifi password back into the Networkmanager definition, and had the new password stored in Kwallet, but Networkmanager still refuses to recognize that the device is a device it can connect to.

Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

Hi, Some time ago I was using this device on the 2.4GHz channel (Linux has always refused to use the 5GHz channel, I say Linux, because Ubuntu has always refused to use the 5GHz channel as Fedora has always refused to) and when it was working it was via the ATH9K driver. I switched t

Re: Is this usb wifi plug supported?

On 29.05.2015 20:06, jd1008 wrote: > > I finally received the item. > I plugged it in and kernel recognizes it as: > [ 174.952769] usb 2-2: USB disconnect, device number 3 > [ 192.344054] usb 2-2: new high-speed USB device number 5 using ehci-pci > [ 192.473984] usb 2-2: New USB device found, i

Re: Is this usb wifi plug supported?

On 05/30/2015 01:35 AM, Heinz Diehl wrote: lsusb -v -d 0e8d:7610 Bus 002 Device 004: ID 0e8d:7610 MediaTek Inc. Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass0 (Defined at Interface level) bDeviceSubClass

Re: Is this usb wifi plug supported?

On 30.05.2015, jd1008 wrote: > I will be getting back to the vendor and try to get my money back. Before you do, would you mind posting the output of lsusb -v -d 0e8d:7610 and the last ~15 lines of the "dmesg" output after plugging in the device and having done a "dmesg --clear" prior to tha

Re: Is this usb wifi plug supported?

On 05/29/2015 03:06 PM, Heinz Diehl wrote: On 29.05.2015, jd1008 wrote: [ 192.473984] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7610 This is the RT2860 chipset, and not an RT55xx. AFAIK, it's not yet supported. Trying to compile the vendor's support for the chipset you site

Re: Is this usb wifi plug supported?

On 05/29/2015 03:06 PM, Heinz Diehl wrote: On 29.05.2015, jd1008 wrote: [ 192.473984] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7610 This is the RT2860 chipset, and not an RT55xx. AFAIK, it's not yet supported. What a total bummer!!! I will be getting back to the vendor and

Re: Is this usb wifi plug supported?

On 29.05.2015, jd1008 wrote: > [ 192.473984] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7610 This is the RT2860 chipset, and not an RT55xx. AFAIK, it's not yet supported. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://a

Re: SV: Re: Is this usb wifi plug supported?

On 05/29/2015 12:49 PM, jd1008 wrote: On 05/29/2015 12:25 PM, birger wrote: Can you find any hints here? This describes installing the vendor driver. The usb vendor and product ids are the same, so yours ought to be the same as this. http://superuser.com/questions/738096/how-to-install-me

Re: SV: Re: Is this usb wifi plug supported?

On 05/29/2015 12:25 PM, birger wrote: Can you find any hints here? This describes installing the vendor driver. The usb vendor and product ids are the same, so yours ought to be the same as this. http://superuser.com/questions/738096/how-to-install-mediatek-mt7610u-rt2860-driver Maintainin

SV: Re: Is this usb wifi plug supported?

Can you find any hints here? This describes installing the vendor driver. The usb vendor and product ids are the same, so yours ought to be the same as this. http://superuser.com/questions/738096/how-to-install-mediatek-mt7610u-rt2860-driver Maintaining a driver manually sucks, but it may help un

Re: Is this usb wifi plug supported?

I finally received the item. I plugged it in and kernel recognizes it as: [ 174.952769] usb 2-2: USB disconnect, device number 3 [ 192.344054] usb 2-2: new high-speed USB device number 5 using ehci-pci [ 192.473984] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7610 [ 192.473989] us

Re: Is this usb wifi plug supported?

On 05/17/2015 01:08 AM, poma wrote: On 17.05.2015 05:00, jd1008 wrote: On 05/14/2015 09:04 AM, poma wrote: On 14.05.2015 05:09, jd1008 wrote: I am considering buying such a plug. It is described as: Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter Features: 100% Br

Re: Is this usb wifi plug supported?

On 17.05.2015 05:00, jd1008 wrote: > > On 05/14/2015 09:04 AM, poma wrote: >> On 14.05.2015 05:09, jd1008 wrote: >>> I am considering buying such a plug. >>> It is described as: >>> Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter >>> Features: >>> 100% Brand New and Hig

Re: Is this usb wifi plug supported?

On 05/14/2015 09:04 AM, poma wrote: On 14.05.2015 05:09, jd1008 wrote: I am considering buying such a plug. It is described as: Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter Features: 100% Brand New and High Quality This AC600 dual band adapter delivers powerful wi

Re: Is this usb wifi plug supported?

On 14.05.2015 05:09, jd1008 wrote: > I am considering buying such a plug. > It is described as: > Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter > Features: > 100% Brand New and High Quality > This AC600 dual band adapter delivers powerful wireless AC technology to your

SV: Is this usb wifi plug supported?

Impossible to say without knowing which chip set it uses. And manufacturers sometimes don't tell you that because they want to be able to switch if a different chip becomes cheaper. With kind regards Birger jd1008 skrev >I am considering buying such a plug. >It is described as: >Mini

Re: Is this usb wifi plug supported?

On 14.05.2015, Erik P. Olsen wrote: > The OP hasn't bought it yet :) Hell, you're right! Sorry :-) -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproj

Re: Is this usb wifi plug supported?

On 2015-05-14 at 08:07:43 Heinz Diehl wrote: > On 14.05.2015, jd1008 wrote: > > > Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB > > Adapter > > Can you please post the output of "lsusb -v" for this adapter? > The OP hasn't bought it yet :) -- Regards Erik P. Olsen --

Re: Is this usb wifi plug supported?

On 14.05.2015, jd1008 wrote: > Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter Can you please post the output of "lsusb -v" for this adapter? -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproje

Is this usb wifi plug supported?

I am considering buying such a plug. It is described as: Mini AC600 High Performance 2.4GHz 5GHz Dual Band WiFi Wireless USB Adapter Features: 100% Brand New and High Quality This AC600 dual band adapter delivers powerful wireless AC technology to your desktop or notebook computer. Simply plug the

Re: C/C++ Compiler Invalidly Turning Warnings into Errors? - Realtek RTL8811AU USB WiFi

On 01/19/2015 08:02 AM, poma wrote: On 18.01.2015 20:45, Stephen Morris wrote: On 01/17/2015 08:07 PM, poma wrote: On 17.01.2015 04:02, Stephen Morris wrote: On 01/16/2015 08:38 AM, Stephen Morris wrote: On 01/15/2015 11:46 PM, poma wrote: On 15.01.2015 08:50, Stephen Morris wrote: I have a

Re: C/C++ Compiler Invalidly Turning Warnings into Errors? - Realtek RTL8811AU USB WiFi

On 18.01.2015 20:45, Stephen Morris wrote: > On 01/17/2015 08:07 PM, poma wrote: >> On 17.01.2015 04:02, Stephen Morris wrote: >>> On 01/16/2015 08:38 AM, Stephen Morris wrote: On 01/15/2015 11:46 PM, poma wrote: > On 15.01.2015 08:50, Stephen Morris wrote: >> I have a driver for a wif

Re: C/C++ Compiler Invalidly Turning Warnings into Errors? - Realtek RTL8811AU USB WiFi

On 01/17/2015 08:07 PM, poma wrote: On 17.01.2015 04:02, Stephen Morris wrote: On 01/16/2015 08:38 AM, Stephen Morris wrote: On 01/15/2015 11:46 PM, poma wrote: On 15.01.2015 08:50, Stephen Morris wrote: I have a driver for a wifi usb device that I need to compile because there are no drivers

  1   2   >