It is almost certainly going to be a memory issue.
In fact earlier today Firefox made my 32G windows 11 device mostly
useless (not a complete lockup for anything but firefox, but
everything else was horribly slow).
I have had to kill firefox on multiple different websites and multiple
different m
On Mon, 27 Nov 2023, Michael Hennebry wrote:
On Sat, 25 Nov 2023, Roger Heflin wrote:
Hardware issues do not typically leave the machine up (except for
intel/amd throttling down when getting hot, but even that will crash
if it gets bad enough).install kernel-tools and run turbostat it
will
On Sat, 25 Nov 2023, Roger Heflin wrote:
Hardware issues do not typically leave the machine up (except for
intel/amd throttling down when getting hot, but even that will crash
if it gets bad enough).install kernel-tools and run turbostat it
will show the cpu freqs and cpu temps.
My CPU is
Tim:
>> So, come OS install and update times, I tend to open a box, inspect
>> heatsinks, clean it, and reseat all the connections. Having a spare
>> power supply to swap over is handy, too. They don't always age
>> well, especially the bargain basement types.
>
Joe Zeff:
> Have you ever used a
Only if freezing includes the machine crashing.If the machine is
not crashing and it recovers from the freeze without a reboot/power
cycle then we are back to memory/paging being a problem. Note I have
seen swapping act as badly. And it may only be every so often that it
runs out of ram
On 11/25/2023 12:08 AM, Tim via users wrote:
So, come OS install and update times, I tend to open a box, inspect
heatsinks, clean it, and reseat all the connections. Having a spare
power supply to swap over is handy, too. They don't always age well,
especially the bargain basement types.
Have
On Sat, Nov 25, 2023 at 2:08 AM Tim wrote:
>
> On Fri, 2023-11-24 at 21:02 -0500, Jeffrey Walton wrote:
> > You are having far too many problems with too many programs. The
> > common fixes are not helping.
>
> Remembering tales from long ago - how updating an OS often seemed to
> induce faults in
On Fri, 2023-11-24 at 21:02 -0500, Jeffrey Walton wrote:
> You are having far too many problems with too many programs. The
> common fixes are not helping.
Remembering tales from long ago - how updating an OS often seemed to
induce faults in hardware that was apparently working fine before.
There
On Fri, Nov 24, 2023 at 8:57 PM Michael Hennebry
wrote:
>
> chromium is freezing on me now, too.
> journalctl -r -g romium
> does not reveal any errors or warnings.
>
> --
> Michael henne...@mail.cs.ndsu.nodak.edu
> "His longhand was fairly good in his yout
chromium is freezing on me now, too.
journalctl -r -g romium
does not reveal any errors or warnings.
--
Michael henne...@mail.cs.ndsu.nodak.edu
"His longhand was fairly good in his youth, but as he got older it got
smaller, more scribbly, and harder to read; although, like being hanged
On Thu, 23 Nov 2023, Samuel Sieb wrote:
I'm saying it wasn't a memory thing. Here are some example lines that I saw.
They were all together at the time that firefox was stuck.
rtkit-daemon[1090]: Successfully made thread 7825 of process 6769
(/usr/lib64/firefox/firefox) owned by '1000' RT at
On 11/23/23 17:37, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
On 11/23/23 17:12, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
Have you checked the journal? I had this happen on a computer that
definitely wasn't low on memory and the journal had a bunc
On 11/23/23 17:37, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
On 11/23/23 17:12, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
Have you checked the journal? I had this happen on a computer that
definitely wasn't low on memory and the journal had a bunc
On Thu, 23 Nov 2023, Samuel Sieb wrote:
On 11/23/23 17:12, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
Have you checked the journal? I had this happen on a computer that
definitely wasn't low on memory and the journal had a bunch of messages
from firefox about timeouts.
On 11/23/23 17:12, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Samuel Sieb wrote:
Have you checked the journal? I had this happen on a computer that
definitely wasn't low on memory and the journal had a bunch of
messages from firefox about timeouts.
journalctl and then what?
I used "jou
On Thu, 23 Nov 2023, Samuel Sieb wrote:
Have you checked the journal? I had this happen on a computer that
definitely wasn't low on memory and the journal had a bunch of messages from
firefox about timeouts.
journalctl and then what?
--
Michael henne...@mail.cs.ndsu.nodak.edu
"I was just
On 23 Nov 2023 at 18:53, Michael Hennebry wrote:
Date sent: Thu, 23 Nov 2023 18:53:41 -0600 (CST)
From: Michael Hennebry
To: noloa...@gmail.com,
Community support for Fedora users
Subject:Re: firefox keeps freezing on
On 11/23/23 16:53, Michael Hennebry wrote:
On Thu, 23 Nov 2023, Jeffrey Walton wrote:
On Thu, Nov 23, 2023 at 2:21?PM Michael Hennebry
wrote:
By now, I am fairly sure that the reason firefox freezes
on me is neither a lack of memory nor a lack of CPU.
My inference is that it is waiting for s
On Thu, 23 Nov 2023, Jeffrey Walton wrote:
On Thu, Nov 23, 2023 at 2:21?PM Michael Hennebry
wrote:
By now, I am fairly sure that the reason firefox freezes
on me is neither a lack of memory nor a lack of CPU.
My inference is that it is waiting for something.
How do I discover what?
I would
On Thu, Nov 23, 2023 at 2:21 PM Michael Hennebry
wrote:
>
> By now, I am fairly sure that the reason firefox freezes
> on me is neither a lack of memory nor a lack of CPU.
> My inference is that it is waiting for something.
> How do I discover what?
I would investigate the virtual memory system.
By now, I am fairly sure that the reason firefox freezes
on me is neither a lack of memory nor a lack of CPU.
My inference is that it is waiting for something.
How do I discover what?
--
Michael henne...@mail.cs.ndsu.nodak.edu
"I was just thinking about the life of a pumpkin. Grow up in the su
On Fri, 3 Nov 2023, Joe Zeff wrote:
On 11/03/2023 11:50 AM, Michael Hennebry wrote:
210 linkedin.com
146 yahoo.com
88 yahoo.net
63 linkedin.com
Why do you have both an extension and a tab for linkedin.com, and extensions
for both yahoo.com and yahoo.net?
I have more
On Fri, 3 Nov 2023, Roger Heflin wrote:
How much ram does the machine firefox is running on have?
8 G
$ free -h
totalusedfree shared buff/cache available
Mem: 7.7Gi 4.1Gi 882Mi 572Mi 2.7Gi 2.7Gi
Swap: 7.7G
\
On Fri, Nov 3, 2023 at 12:57 PM Michael Hennebry
wrote:
>
> On Fri, 3 Nov 2023, Michael Hennebry wrote:
>
> > here are the top memory entries from about:processes:
> > 872firefox
> > 555weather.com
> > 254imasdk.googleapis.com
> > 210linkedin.com
> > 204Extensions
> > 146
On 11/03/2023 11:50 AM, Michael Hennebry wrote:
210 linkedin.com
146 yahoo.com
88 yahoo.net
63 linkedin.com
Why do you have both an extension and a tab for linkedin.com, and
extensions for both yahoo.com and yahoo.net?
___
use
On Fri, 3 Nov 2023, Michael Hennebry wrote:
here are the top memory entries from about:processes:
872firefox
555weather.com
254imasdk.googleapis.com
210linkedin.com
204Extensions
146yahoo.com
132avrfreaks.net
116googlesyndication.com
88yahoo.net
85hackerra
here are the top memory entries from about:processes:
872firefox
555weather.com
254imasdk.googleapis.com
210linkedin.com
204Extensions
146yahoo.com
132avrfreaks.net
116googlesyndication.com
88yahoo.net
85hackerrank.com
63linkedin.com
37github.com
On Thu, 2023-11-02 at 11:21 -0500, Michael Hennebry wrote:
> Main, google and yahoo mail tabs seem to be taking the most CPU and memory,
> 20% 618MB, 0.6% 411MG and 0.18% 159MB .
> The latter two occasionally flicker to about 20% CPU.
> No smoking gun.
It's well to remember that it can be a cumula
It does seem that about:processes and about:performance seem to be same page.
So yes about:process. When I googled it pointed me to
about:performance so I have been using that without noticing that it
was an alias.
finding and killing/restarting the specific tab has been working for
me for a cou
On Thu, 2 Nov 2023, Roger Heflin wrote:
type this In the address bar: about:performance
I cannot get to about:performance .
'Tis not in the about:about list.
When I type about:performance ,
I get about:memory .
click on the memory column and sort by biggest first.
see what specific web page
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 02:10 PM, Michael Hennebry wrote:
With firefox frozen.
And with it closed? What I'm trying to find out is how much of that is stuff
Firefox needs to keep between sessions and how much of it is session
specific.
885M with firefox closed.
On Wed, Nov 1, 2023 at 11:12 PM Michael Hennebry
wrote:
>
> My firefox on F38 freezes a lot.
> I get "Firefox" is not responding a lot.
> At one time, I thought it was because of too many windows and tabs open.
> I closed several windows.
> Shutting it down and bringing it back up often helped,
>
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 02:10 PM, Michael Hennebry wrote:
With firefox frozen.
And with it closed? What I'm trying to find out is how much of that is stuff
Firefox needs to keep between sessions and how much of it is session
specific.
I'll get back to you on tha
On 11/02/2023 02:10 PM, Michael Hennebry wrote:
With firefox frozen.
And with it closed? What I'm trying to find out is how much of that is
stuff Firefox needs to keep between sessions and how much of it is
session specific.
___
users mailing list
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 01:55 PM, Michael Hennebry wrote:
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 10:21 AM, Michael Hennebry wrote:
/dev/sda7 32G 23G 7.1G 76% /home
If I'm not mistaken, firefox puts its working files both in /tmp and in
your
On 11/02/2023 01:55 PM, Michael Hennebry wrote:
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 10:21 AM, Michael Hennebry wrote:
/dev/sda7 32G 23G 7.1G 76% /home
If I'm not mistaken, firefox puts its working files both in /tmp and
in your home directory. If so, that may be yo
On Thu, 2 Nov 2023, Joe Zeff wrote:
On 11/02/2023 10:21 AM, Michael Hennebry wrote:
/dev/sda7 32G 23G 7.1G 76% /home
If I'm not mistaken, firefox puts its working files both in /tmp and in your
home directory. If so, that may be your problem. Consider installing
Bleachbit and l
Thank you Joe Z, Tim and Richard E.
Firefox just starting freezing.
[hennebry@fedora ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs4.0M 0 4.0M 0% /dev
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 1.6G 1.7M 1.6G 1% /run
/dev/sda331G
yeah...!
I also had the same symptoms... it wasn't good.
firefox-118.0.2.tar.bz2
https://support.mozilla.org/en-US/kb/install-firefox-linux
I manually setup fedora38 and applied it through the link process, and it seems
to have improved,
so I'm using it well.
___
On Wed, 1 Nov 2023 22:12:14 -0500 (CDT)
Michael Hennebry wrote:
> My firefox on F38 freezes a lot.
> I get "Firefox" is not responding a lot.
> At one time, I thought it was because of too many windows and tabs
> open. I closed several windows.
> Shutting it down and bringing it back up often hel
type this In the address bar: about:performance
click on the memory column and sort by biggest first.
see what specific web pages are using excessive ram (usually close to
1gb or more). click on the tab: entryh that sucks and a X will
appear on the far right, and click the X and the specific tab
On 11/02/2023 10:21 AM, Michael Hennebry wrote:
/dev/sda7 32G 23G 7.1G 76% /home
If I'm not mistaken, firefox puts its working files both in /tmp and in
your home directory. If so, that may be your problem. Consider
installing Bleachbit and letting it clean all of the cruft out.
I had firefox continually freezing (Xorg) taking the gui with it.
I then aliased firefox to:
cpulimit -i -l 200 /usr/bin/firefox "$@"
and it stopped taking the rest of the gui with it.
Recently I (had to) switched to Wayland and firefox (with the alias) has
only crashed 3 or 4 times
On Wed, 2023-11-01 at 21:24 -0600, Joe Zeff wrote:
> Firefox can be quite a memory hog, depending on what you're doing. What
> does
>
> free -h
>
> show you, as well as
>
> df
There's an about:memory page in Firefox, an about:performance, an
about:processes and a bunch of other info listed if
On 11/01/2023 09:12 PM, Michael Hennebry wrote:
My firefox on F38 freezes a lot.
I get "Firefox" is not responding a lot.
Firefox can be quite a memory hog, depending on what you're doing. What
does
free -h
show you, as well as
df
You might be running short of memory and/or disk space.
_
My firefox on F38 freezes a lot.
I get "Firefox" is not responding a lot.
At one time, I thought it was because of too many windows and tabs open.
I closed several windows.
Shutting it down and bringing it back up often helped,
but not necessarily for very long.
According to top, firefox freezes e
On 7/22/20 5:58 PM, Jack Craig wrote:
what is the current wisdom on debugging this fedora 32 freeze failure type?
You'll first need to provide some information.
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to u
what is the current wisdom on debugging this fedora 32 freeze failure type?
thx, jackc...
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.f
On 2020-05-06 14:41, Richard England wrote:
On 2020-05-06 12:06, antonio montagnani wrote:
Richard England ha scritto il 06/05/20 alle 21:02:
Steven,
I've checked all the locations I know of and using the techniques
I'm aware of but I don't seem to be able to locate
dnfdragora-1.1.1-6.fc32.no
On 2020-05-06 12:06, antonio montagnani wrote:
Richard England ha scritto il 06/05/20 alle 21:02:
Steven,
I've checked all the locations I know of and using the techniques I'm
aware of but I don't seem to be able to locate
dnfdragora-1.1.1-6.fc32.noarch.rpm All I turn up for F32 is
dnfdrago
On 2020-05-06 12:06, antonio montagnani wrote:
Richard England ha scritto il 06/05/20 alle 21:02:
Steven,
I've checked all the locations I know of and using the techniques I'm
aware of but I don't seem to be able to locate
dnfdragora-1.1.1-6.fc32.noarch.rpm All I turn up for F32 is
dnfdrago
Richard England ha scritto il 06/05/20 alle 21:02:
Steven,
I've checked all the locations I know of and using the techniques I'm
aware of but I don't seem to be able to locate
dnfdragora-1.1.1-6.fc32.noarch.rpm All I turn up for F32 is
dnfdragora-2.0.0-2.fc32.noarch.rpm
When I checked FC31
Steven,
I've checked all the locations I know of and using the techniques I'm
aware of but I don't seem to be able to locate
dnfdragora-1.1.1-6.fc32.noarch.rpm All I turn up for F32 is
dnfdragora-2.0.0-2.fc32.noarch.rpm
When I checked FC31 it only showed dnfdragora-1.1.1-3.fc31.noarch.rpm
On 2020-05-04 04:26, Steven Usdansky via users wrote:
The current version of dnfdragora has been crashing for me for about a week.
Not wanting to investigate further, I downgraded to
dnfdragora-1.1.1-6.fc32.noarch.rpm which still works
___
Thank you
On Mon, 2020-05-04 at 13:40 +0200, Bogusław Augustyniak wrote:
> Yes. It crashes, and isn’t accessible with orca screenreader. On my fedora
> mate I installed gnome-software package. And it works.
Please use standard quoting behaviour in your email software. I'm also
seeing all your messages in b
Bogusław Augustyniak ha scritto il 04/05/20 alle 13:40:
*Yes. It crashes, and isn’t accessible with orca screenreader. On my
fedora mate I installed gnome-software package. And it works.*
___
users mailing list -- users@lists.fedoraproject.org
To uns
Yes. It crashes, and isn’t accessible with orca screenreader. On my fedora mate I installed gnome-software package. And it works.___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fe
The current version of dnfdragora has been crashing for me for about a week.
Not wanting to investigate further, I downgraded to
dnfdragora-1.1.1-6.fc32.noarch.rpm which still works
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe
Before I spend inordinate amounts of time on this, has anyone else
encountered dnfdragora freezing or crashing since upgrading a machine
from f31 to f32? This is when starting it as a normal user.
I have 2 machines that his happens on and one that does not.
On the first machine, if I run
On 2020-04-28 21:31, Tim via users wrote:
Pardon the Top Post
MOOT
It’s here! We’re proud to announce the release of Fedora 32.
Thanks to the hard work of thousands of Fedora community
members and contributors, we’re celebrating yet another
on-time release!
> On Tue, 2020-04-28 at 10:27
Fedora 32 is official, so this discussion can continue on this list.
Anyway, it seems that same issue might be in F31, as the bug reported by
Andre is quite old
Antonio Montagnani
Linux Fedora 32 Workstation
da/from Gmail
Il giorno mar 28 apr 2020 alle ore 15:31 Tim via users <
users@lists.fedor
On Tue, 2020-04-28 at 10:27 +, Andre Robatino wrote:
> I'm not certain, but I thought it was considered okay to discuss a
> Beta version of an upcoming release on the users list.
It's generally considered not right. This list is for the current
*release*, the test list is for the not yet rele
I might be thinking of #fedora on IRC. The topic says "Topic for #fedora is:
#Fedora F30, F31, F32 Beta end user support".
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora
I'm not certain, but I thought it was considered okay to discuss a Beta version
of an upcoming release on the users list. Besides, by the time most people read
this thread, F32 will have been officially released (just a few hours from now).
___
users ma
On Tue, 2020-04-28 at 07:02 +0200, antonio montagnani wrote:
> Installed F32 on two machines last sunday; I have experienced freezing
> of the machines and I had to hard reboot, Anyone experiencing same issue??
At the risk of being flamed yet again, I'll point out that the Fedora
T
The machine experiencing the freezes is running the 5.6.6 kernel (the F32
release version), which is also the current stable kernel in F31, so I'd expect
some people running F31 to also be seeing the freezes right now. The previous
F31 kernel was 5.5.17, I don't know if that was affected.
__
furthermore if I use dnfdragora for updating it crashes immediately :-(
Antonio Montagnani
Linux Fedora 32 Workstation
da/from Gmail
Il giorno mar 28 apr 2020 alle ore 10:34 Andre Robatino <
robat...@fedoraproject.org> ha scritto:
> Oh, and BTW, the reporter of the bug commented that he thought
Oh, and BTW, the reporter of the bug commented that he thought it should be a
32 blocker, but didn't mark it as such. I was noticing similar freezes in my 32
and Rawhide VMs a few weeks ago, but they went away, presumably when the fixes
made it into the kernel.
__
I have experienced freezes shortly after running dnf on one of my machines. It
has nothing to do with GNOME, it happens even in runlevel 3 (multi-user). I
found this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1826091
It claims the problem is fixed with kernel 5.6.7 which is in testing, I
Installed F32 on two machines last sunday; I have experienced freezing
of the machines and I had to hard reboot, Anyone experiencing same issue??
--
Antonio MontagInstalled nani
Linux Fedora 32 (Workstation)
Fujitsu
___
users mailing list -- users
On Sat, 2017-11-25 at 21:56 +, Joakim Forøysund wrote:
> Hi!
> I pulled out my MacBook Pro from back in 2008 and installed F26 on
> it. It worked fine the first couple of days (except from wifi), but
> then the cursor started lagging and freezing up. I can move it slowly
> about
Hi!
I pulled out my MacBook Pro from back in 2008 and installed F26 on it. It
worked fine the first couple of days (except from wifi), but then the cursor
started lagging and freezing up. I can move it slowly about an inch on the
screen before it freezes. Then I can wait a couple of seconds and
On 11/21/2017 09:22 AM, Konstantin Svist wrote:
> Hi,
>
> Since last update I've been seeing freezing up behavior, mostly in the
> xfce4-power-manager.
>
> Specifically, this is the behavior I see when starting it up in command
> line ($ xfce4-power-manager --no-daemo
Hi,
Since last update I've been seeing freezing up behavior, mostly in the
xfce4-power-manager.
Specifically, this is the behavior I see when starting it up in command
line ($ xfce4-power-manager --no-daemon --debug --dump):
https://pastebin.ca/3938185
I can interact with its UI directly
It's interesting the upgrade suggestion because I have been getting this
issue lately-several times-on f25. I have tried several things, this being
the latest:
Kill -9 -1
Don't run this as root though.
P.s. in retrospect I'd try using sigterm on the first try; kill -15 -1
On Mar 24, 2017 4:20 PM,
Allegedly, on or about 24 March 2017, Rick Stevens sent:
> I have Xfce because I could make it look like Gnome2 and still
> customize it to a reasonable extent. I guess MATE is popular with
> Gnome2ites as well (such as Tim), though I've not used it.
If what you're using works, stick with it. Bu
On Fri, 2017-03-24 at 11:43 -0600, Greg Woods wrote:
>
> On Fri, Mar 24, 2017 at 11:28 AM, Rick Stevens
> wrote:
> > Killing gnome-shell will not necessarily free the
> > machine up and make the GUI work as it is a significant component
> > of
> > the desktop
> >
>
> It won't. If you unceremoni
On 03/24/2017 12:18 PM, Joe Zeff wrote:
> On 03/24/2017 12:03 PM, Tim wrote:
>> Likewise. I liked Gnome 2. I don't like Gnome 3, and it's too heavy a
>> workload for my PCs. I've said the same thing about inappropriate
>> tablet interface style. And I don't like KDE. But I went with the MATE
>
On 03/24/2017 12:03 PM, Tim wrote:
Likewise. I liked Gnome 2. I don't like Gnome 3, and it's too heavy a
workload for my PCs. I've said the same thing about inappropriate
tablet interface style. And I don't like KDE. But I went with the MATE
desktop, which is about as close as you can get to
Allegedly, on or about 24 March 2017, Rick Stevens sent:
> I rarely use Gnome3. Last time I spent time with it (granted, it was
> at least a year ago), it looked like it was designed for tablets and I
> don't care for that metaphor on my main systems. I've never gotten
> fond of KDE and I've never
On 03/24/2017 10:28 AM, Rick Stevens wrote:
(putting on my flack jacket and helmet to await the inevitable
onslaught of Gnome3 and KDE lovers hurling grenades and tactical nukes
in my general direction)
Not from me, that's for sure. I bailed on Gnome when I learned what
Gnome3 was going to be
On Fri, Mar 24, 2017 at 11:28 AM, Rick Stevens wrote:
> Killing gnome-shell will not necessarily free the
> machine up and make the GUI work as it is a significant component of
> the desktop
>
It won't. If you unceremoniously kill off gnome-shell, the desktop no
longer works at all.
> and the
On 03/24/2017 02:00 AM, Patrick Dupre wrote:
> Hello,
>
> Since 1 week, when I update my machine (fedora24) by using
> dnf update, during the update, the graphic screen freezes.
> The update end properly.
You really should upgrade to F25, simply because F26 is around the
corner and 6 months after
Hello,
Since 1 week, when I update my machine (fedora24) by using
dnf update, during the update, the graphic screen freezes.
The update end properly.
The only thing that I can do it to open a text terminal.
and restart the machine.
I do not see any wrong, except that there is a process
/usr/bin/gn
On Sat, Feb 25, 2017 at 12:23 PM, Antonio M
wrote:
> I am running a Raspberry Pi2 with Rasbian, Libreelec and Fedora: when I
> switch to Fedora I feel lost
I think it comes down to what you want to use it for. I have F24 running on
a Pi2, and it works quite well as a Bacula storage server. The
I am running a Raspberry Pi2 with Rasbian, Libreelec and Fedora: when I
switch to Fedora I feel lost, I have no idea where the project is and what
developers are working on, so I have no idea what is working and what not
(and it is very disappointing, or am I missing the place to look at??)
Antoni
> On Sat, Feb 25, 2017 at 8:52 AM, wrote:
>
>> Would it be fair to characterize the state of F25 development for ARM as
>> "experimental".
>>
>
> Yes. Even the documentation says that the wifi doesn't work and the audio
> doesn't work. It is obviously still a work in progress. I installed it
> jus
On Sat, Feb 25, 2017 at 8:52 AM, wrote:
> Would it be fair to characterize the state of F25 development for ARM as
> "experimental".
>
Yes. Even the documentation says that the wifi doesn't work and the audio
doesn't work. It is obviously still a work in progress. I installed it just
to prove I
Would it be fair to characterize the state of F25 development for ARM as
"experimental". It's certainly not ready for prime time.
I installed the MATE ARM spin to a 128G Class 10 microSD rated for 85MB/s
reads (not rated for writes). I was delighted to see my RP3 boot up
perfectly to the Anaconda
On Mon, 2015-11-09 at 09:51 -0500, Kevin wrote:
> Hi, my screen freezes on an irregular basis. At first I thought it
> was
> only when going in or out of full screen of a video but yesterday
> even
> trying to open gnome settings can freeze me. When this occurs the
> rest
> of the system continues
I did remove nouveau before installing nvidia and I did try the
rpmfusion pkgs after that with no success. Ill keep an eye on that
bug. Thank you.
Kevin
DON'T PANIC
On Mon, Nov 9, 2015 at 11:01 AM, stan wrote:
> On Mon, 9 Nov 2015 09:51:34 -0500
> Kevin wrote:
>
>> Hi, my screen freezes on an
On Mon, 9 Nov 2015 09:51:34 -0500
Kevin wrote:
> Hi, my screen freezes on an irregular basis. At first I thought it was
> only when going in or out of full screen of a video but yesterday even
> trying to open gnome settings can freeze me. When this occurs the rest
> of the system continues to op
Hi, my screen freezes on an irregular basis. At first I thought it was
only when going in or out of full screen of a video but yesterday even
trying to open gnome settings can freeze me. When this occurs the rest
of the system continues to operate but keyboard and mouse are useless.
After rebooting
Thanks for the many answers to my initial request:
https://lists.fedoraproject.org/pipermail/users/2015-October/465783.html
which I am only reading NOW, in the list archives, because...
I had wrongly flagged my own message and all its replies as spam :-(
(long story for another day).
Anyway: I
On 21Oct2015 09:20, Tom Horsley wrote:
On Wed, 21 Oct 2015 12:19:55 +1100
Cameron Simpson wrote:
Is your connection essentially for purposes of port forwards?
Yep. My script has also evolved over time and may be similar.
I saw some very strange behavior sometimes though where it acted
like t
Sergiu Mihuleac wrote:
> Did you fond out what causes the problem? Because i keep ssh up for days
> even if I close the lid of my laptop up to 8 - 10 hours the pipe still
> doesn't gets broken. You should tall with your ISP see if there is
> something that he does, or do you have dynamic ip?
> On
Did you fond out what causes the problem? Because i keep ssh up for days
even if I close the lid of my laptop up to 8 - 10 hours the pipe still
doesn't gets broken. You should tall with your ISP see if there is
something that he does, or do you have dynamic ip?
On Oct 21, 2015 6:11 PM, "Neal Becker
Tom Horsley wrote:
> On Wed, 21 Oct 2015 10:46:52 -0400
> Neal Becker wrote:
>
>> vpn (openvpn over udp)
>
> The VPN that the MIS department supports at work runs
> six times slower than a forwarded ssh connection so the
> only thing I ever use VPN for is getting my ssh forwarding
> going if it
On Wed, 21 Oct 2015 10:46:52 -0400
Neal Becker wrote:
> vpn (openvpn over udp)
The VPN that the MIS department supports at work runs
six times slower than a forwarded ssh connection so the
only thing I ever use VPN for is getting my ssh forwarding
going if it happens to die in some way that doesn
Tom Horsley wrote:
> On Wed, 21 Oct 2015 12:19:55 +1100
> Cameron Simpson wrote:
>
>> Is your connection essentially for purposes of port forwards?
>
> Yep. My script has also evolved over time and may be similar.
>
> I saw some very strange behavior sometimes though where it acted
> like the c
1 - 100 of 158 matches
Mail list logo
