d I get several errors about some of the servers
> not available (but I see the ivy cache being loaded with some stuffs). I
> tried with and without Windows Firewall turned on.
> The output will always be BUILD FAILED:
>
> F:\COEProjects\plugins\liferay-plugins-sdk-6.2\portlets&g
tried with and without Windows Firewall turned on.
The output will always be BUILD FAILED:
F:\COEProjects\plugins\liferay-plugins-sdk-6.2\portlets>create.bat
hello-world "
Hello World"
Buildfile: F:\COEProjects\plugins\liferay-plugins-sdk-6.2\portlets\build.xml
[ivy:resolve] :
eploy BUILD FAILED
I can do execute svn ls for heppc1 as well
$ svn ls
https://heppc1/svn/LCG/Quattor/Templates/tags/glite3.1-20080129/tags
2008/
2009/
2010/
2011/
2012/
The address which I get in the error message can be different heppc1 and
heppc1.ft.uam.es
BUILD FAILED
/home/pardo/workspace/t
Don't use heppc1 _anywhere_. Replace every instance with the full domain name.
heppc1 might be a local DNS convenience, or it might be in your /etc/hosts.
Just don't use it.
It IS an access problem. The error message is very specific about that.
Peter West
"Take my yoke upon you, and learn fro
rd which I prodused by command htpasswd -nm sofia on the same svn
server (random symbols $apr)
Sofia
On 07/27/2012 01:58 PM, Sofia Sayzhenkova wrote:
Hello all,
I have a problem during "ant -debug --noconfig deploy".
BUILD FAILED
/home/sofia/workspace/trunk/quattor.build.xm
rechtliche Bindungswirkung.
Aufgrund der leichten Manipulierbarkeit von E-Mails koennen wir keine Haftung
fuer den Inhalt uebernehmen.
> Date: Tue, 31 Jul 2012 17:32:20 +0200
> From: ssayz...@cern.ch
> To: user@ant.apache.org
> Subject: Re: ant deploy BUILD FAILED
>
> I can do
I can do execute svn ls for heppc1 as well
$ svn ls
https://heppc1/svn/LCG/Quattor/Templates/tags/glite3.1-20080129/tags
2008/
2009/
2010/
2011/
2012/
The address which I get in the error message can be different heppc1 and
heppc1.ft.uam.es
BUILD FAILED
/home/pardo/workspace/trunk5
Your authentication problem is with a different address:
https://heppc1/svn/LCG/Quattor/Templates/tags/glite3.1-20080129/tags/
Note the server is heppc1, not heppc1.ft.uam.es
The bogus address is probably specified somewhere in your build file.
Peter West
"Take my yoke upon you, and learn from
Hello Peter and Stefan,
thank you for your response.
I don't know how I can answer in the same thread, because I didn't
receive the emails.
Does the command "ant deploy" need additional rights on the svn server
unlike for example "svn commit" and "svn ls"?
I can execute svn ls without any
On 2012-07-27, Sofia Sayzhenkova wrote:
> Hello all,
> I have a problem during "ant -debug --noconfig deploy".
> BUILD FAILED
> /home/sofia/workspace/trunk/quattor.build.xml:340: Error getting
> information about SVN branch
> https://heppc1/svn/LCG/Quattor/Templates
How are you authenticating to the SVN repository?
Peter West
"Come to me, all who labour and are heavy burdened, and I will give you rest."
On 27/07/2012, at 9:58 PM, Sofia Sayzhenkova wrote:
> Hello all,
>
> I have a problem during "ant -debug --noconfig deploy&quo
Hello all,
I have a problem during "ant -debug --noconfig deploy".
BUILD FAILED
/home/sofia/workspace/trunk/quattor.build.xml:340: Error getting
information about SVN branch
https://heppc1/svn/LCG/Quattor/Templates/tags/glite3.1-20080129/tags/:
svn: Authentication required f
well, I still have the same problem while trying to compile
apache-tomcat-7.0.22 sources
...
BUILD FAILED
/media/sda7/inst/java/jars/j2ee/servlets/apache-tomcat-7.0.22-src/build.xml:2211:
The following error occurred while executing this line:
/media/sda7/inst/java/jars/j2ee/servlets/apache
3707 Sep 9 19:14 build-src.xml
> drwxr-x--- 2 knoppix knoppix 4096 Sep 6 19:37 deps
> drwxr-x--- 4 knoppix knoppix 4096 Sep 9 19:20 doc
> drwxr-x--- 2 knoppix knoppix 4096 Sep 9 19:18 lib
> drwxr-x--- 2 knoppix knoppix 4096 Sep 6 19:37 manifest
> drwxr-x--- 3 knoppix knoppix 4096
/usr/lib/jvm/java-6-openjdk/lib/tools.jar
Buildfile: build.xml does not exist!
Build failed
$ ant --help | grep buildfile
-buildfile use given buildfile
-find(s)earch for buildfile towards the root of
$ ant -buildfile build-src.xml
Unable to locate tools.jar. Expected to
os:
init-no-m2:
init-cache:
-setup-temp-cache:
-fetch-netrexx:
BUILD FAILED
/users1/arun/apache-ant-1.8.2/fetch.xml:319: The following error occurred while executing this line:
/users1/arun/apache-ant-1.8.2/fetch.xml:144: error during FTP transfer: java.net.ConnectException: Connection timed
typing url wrong? can you make sure with this build.xml file and i am
sending web.xml file also and here it is
http://www.nabble.com/file/p25821146/web.xml web.xml
waiting for your replies...
srinivas2828 wrote:
>
> thats great and got one more problem got this message
> BUILD FAILE
thats great and got one more problem got this message
BUILD FAILED
/home/miriyala/Desktop/myapp/build.xml:380: The content of elements must
consist of well-formed character data or markup.
Francis Galiegue-4 wrote:
>
> On Fri, Oct 9, 2009 at 14:40, srinivas2828 wrote:
>>
>&
On Fri, Oct 9, 2009 at 14:40, srinivas2828 wrote:
>
> tomcat path is /opt/apache-tomcat-5.5.27 only
>
Well then what Whatty said: spelling mistake. You wrote /op instead of /opt.
--
Francis Galiegue
ONE2TEAM
Ingénieur système
Mob : +33 (0) 683 877 875
Tel : +33 (0) 178 945 552
f...@one2team.co
am trying to buld webapplication when i typed "ant" command in
>>>> terminal got message which says
>>>> miriy...@vaio:~/Desktop/myapp$ ant
>>>> Buildfile: build.xml
>>>>
>>>> prepare:
>>>>
>>>> compile:
>>&
.27/common/endorsed
>>
>>
>> srinivas2828 wrote:
>>>
>>> I am trying to buld webapplication when i typed "ant" command in
>>> terminal got message which says
>>> miriy...@vaio:~/Desktop/myapp$ ant
>>> Buildfile: build.xml
>
sktop/myapp$ ant
>> Buildfile: build.xml
>>
>> prepare:
>>
>> compile:
>> [javac] Compiling 1 source file to
>> /home/miriyala/Desktop/myapp/build/WEB-INF/classes
>>
>> BUILD FAILED
>> /home/miriyala/Desktop/myapp/build.xml:288:
>&g
uld webapplication when i typed "ant" command in terminal
> got message which says
> miriy...@vaio:~/Desktop/myapp$ ant
> Buildfile: build.xml
>
> prepare:
>
> compile:
> [javac] Compiling 1 source file to
> /home/miriyala/Desktop/myapp/build/WEB-INF/classes
&
I am trying to buld webapplication when i typed "ant" command in terminal got
message which says
miriy...@vaio:~/Desktop/myapp$ ant
Buildfile: build.xml
prepare:
compile:
[javac] Compiling 1 source file to
/home/miriyala/Desktop/myapp/build/WEB-INF/classes
BUILD FAILED
/hom
gt; clean-all:
> [echo] tolven: c:\tolvendev\tolven\build.xml
> clean:
> [echo] tolvenInstaller: c:\tolvendev\tolven\installer\build.xml
> tolvenWS-clean:
> BUILD FAILED c:\tolvendev\tolven\build.xml:173: Basedir
>c:\tolvendev\tolven\${tolven.home}\tolvenClient does not exis
--- On Tue, 9/15/09, Stefan Bodewig wrote:
From: Stefan Bodewig
Subject: Re: Build Failed on Vista: File Not Found Error
To: user@ant.apache.org
Date: Tuesday, September 15, 2009, 6:18 AM
On 2009-09-14, Ismail Jibrin wrote:
> I am trying to build Tolven projects on Eclipse but got
On 2009-09-14, Ismail Jibrin wrote:
> I am trying to build Tolven projects on Eclipse but got the following
> error.
> BUILD FAILEDc:\tolvendev\tolven\build.xml:173: Basedir
> c:\tolvendev\tolven\${tolven.home}\tolvenClient does not exist
> I know the file c:\tolvendev\tolven\${tolven.home}\to
I am trying to build Tolven projects on Eclipse but got the following error.
BUILD FAILEDc:\tolvendev\tolven\build.xml:173: Basedir
c:\tolvendev\tolven\${tolven.home}\tolvenClient does not exist
I know the file c:\tolvendev\tolven\${tolven.home}\tolvenClient exists and
there is no free space in t
The BUILD FAILED messages are not printed during the call to task "test2",
but after "test2" exits due to an error. They are part of the output from
Ant and not the task itself.
If you want the BUILD FAILED output, you need to first capture the output of
Ant and not of a s
ore the line numbers):
test1:
test2:
BUILD FAILED
C:\work\WS\build\build.xml:4580: The following error occurred while
executing this line:
C:\work\WS\build\build.xml:4586: Only antlib URIs can be located from the
URI alone,not the URI
But the contents of mylog.txt is just:
test2:
What have you set for the default target in the build file ?
2008/11/11 Mark Salter <[EMAIL PROTECTED]>
> ilango_g wrote:
> > Yes, I am. Actually, I do not see a "dist" in the targets tab.
> I wonder where else it is appearing then. Is your build.xml very long,
> can you post it somewhere and p
ilango_g wrote:
> Yes, I am. Actually, I do not see a "dist" in the targets tab.
I wonder where else it is appearing then. Is your build.xml very long,
can you post it somewhere and post a link to it? Perhaps on www.cl1p.net
or similar?
> Is it possible to simply run Ant from the Eclipse for th
ration?
>
> --
> Mark
>
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
--
View this message in context:
http://www.nabble.com/B
ilango_g wrote:
> Hi
> I have written and used an Ant build.xml from Eclipse Europa to create and
> deploy a WAR file into JBoss 5 CR 2.
> As far as I know there are no references to the target "dist" in my
> build.xml. So I am confused why it is complaining about "dist".
So a find for text 'dist'
ers\ilango\workspace\CustomService3\dist
[war] Building war:
C:\Users\ilango\workspace\CustomService3\dist\CustomService3.war
[move] Moving 1 file to C:\JBoss5\jboss-5.0.0.CR2\server\default\deploy
BUILD FAILED
Target "dist" does not exist in the project "CustomService3&quo
uot;web/WEB-INF/web.xml">
>
>
>
>
>
>
>
>
>
>
> The build failed because:
> BUILD FAILED
> build-custom.xml:51: The following error occurred while executing this
> lin
Hello,
I am trying to package a WAR with some xml in the WEB-INF folder.
The build failed because:
BUILD FAILED
build-custom.xml:51: The following error
On Wed, 2007-05-02 at 16:07 -0700, jasonn1234 wrote:
> /Users/jason1234/Desktop/enterprisejava/HelloWorld/build.xml:76:
You could open this file and see how the destination directory is
arrived at.
Looking at this : http://ant.apache.org/manual/CoreTasks/copy.html
may help you understand how a 'c
error:
***
BUILD FAILED
/Users/jason1234/Desktop/enterprisejava/HelloWorld/build.xml:76: Failed to
copy /Users/jason1234/Desktop/enterprisejava/HelloWorld/HelloWorld.ear to
/usr/local/jboss/JBoss-2.4.4_Jetty-3.1.3-1/jboss/deploy/HelloWorld.ear due
to /usr/local/jboss/JBoss-2.4.4_Jetty-3.1.3-1
sages like
build.xml does not exist!
Build failed
You need a build.xml to invoke ANT.
HTH
-Prashant
vmanthi wrote:
I had my apache-ant-1.6.2 and completed setting varaibles
ANT_HOME
PATH
but when I run basic ant command like ant -version at CMD
getting messages like(copied from the CMD, no ma
I had my apache-ant-1.6.2 and completed setting varaibles
ANT_HOME
PATH
but when I run basic ant command like ant -version at CMD
getting messages like(copied from the CMD, no manipulation)
build.xml does not exist!
Build failed
Clue: I logged off and logged in as a different user(with my
class RDBMServices (maybe being
instantiated)?
Is there maybe some code generation step that needs to occur prior to
javac compilation?
Timothy Haroutunian wrote:
Hello,
I am trying to compile uPortal and I am getting a build failed error. I am
getting the following error:
[javac
Hello,
I am trying to compile uPortal and I am getting a build failed error. I am
getting the following error:
[javac]
/usr/local/uPortal/source/org/jasig/portal/RDBMServices.java:559:
org.jasig.portal.RDBMServices.GenericDataSource is not abstract and does not
override abstract method
is the error message I am getting,
> can anybody offer any advice
> BUILD FAILED
> C:\Documents and Settings\sub\My Documents\cvstrial\build.xml:8: The
> processing
> instruction target matching "[xX][mM][lL]" is not allowed.
>
> ---
What does your build.xml look like?
Regards,
Gisbert Amm
Suzana Barreto wrote:
Hi, my build file which previously worked is now failing to build - no
changes to the file were made. This is the error message I am getting,
can anybody offer any advice
BUILD FAILED
C:\Documents and Settings\sub
Hi, my build file which previously worked is now failing to build - no
changes to the file were made. This is the error message I am getting,
can anybody offer any advice
BUILD FAILED
C:\Documents and Settings\sub\My Documents\cvstrial\build.xml:8: The
processing
instruction target matching
t.apache.org
>Betreff: how to BUILD FAILED when tests failed
>
>Hi,
>
>I am using the following lines for testing:
>
>
>description="run all tests">
> failureproperty="junit_test_failed" forkmode="perBatch"&g
Hi,
I am using the following lines for testing:
How can I make my build to 'BUILD FAILED' and still execute the targets after
test:test since
Hi everybody, I am getting errors when compiled using ant, OS is 2003, I
checked all the config and system variables, every thing looks fine . This
is the error I m getting when trying to build
Buildfile: build.xml
BUILD FAILED
C:\plumtree_ui_source\portalui\6.0.x\ptwebui\build.xml:13: The
Thank you very much, it started working :-)
-Original Message-
From: James Abley [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 01, 2005 12:50 PM
To: Ant Users List
Subject: Re: Ant "Build Failed" for uninstall target
I think your url attribute on the undeploy elemen
stall It is giving me some HTML dump on
> my command line and at the end it is saying BUILD FAILED. But When I
> check with Admin pages WAR files is uninstalled. What could be the
> problem with Script. Here I am pasting the script I am using.
>
>
>
>
>
>
>
>
&g
Hi
I am facing a variety problem with ANT. I have written an ant Script
which Installs me a WAR file into Tomcat. I have one more Task to
uninstall also. When I use uninstall It is giving me some HTML dump on
my command line and at the end it is saying BUILD FAILED. But When I
Just set up the fileset ...
Jan
>-Ursprüngliche Nachricht-
>Von: Rebhan, Gilbert [mailto:[EMAIL PROTECTED]
>Gesendet: Mittwoch, 17. August 2005 16:20
>An: user@ant.apache.org
>Betreff: Ensure Build Failed if fileset contains no jars
>
>
&g
Question : The script should fail, if there are no jars beyond the
toplevel directory.
How to get a Build Failed when there are only empty folders ?
Regards, Gilbert
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands
Rebhan, Gilbert wrote:
Hi,
posting here, as i think that is an ant problem
i have a problem with my publisher, with a
CruiseControl workflow like that =
bootstrapper = get the latest Buildfiles for the project
build = starting a wrapper antscript that calls the buildscript
publisher = sendin
Hi,
posting here, as i think that is an ant problem
i have a problem with my publisher, with a
CruiseControl workflow like that =
bootstrapper = get the latest Buildfiles for the project
build = starting a wrapper antscript that calls the buildscript
publisher = sending mails, moving/copying
]
Gesendet: Mittwoch, 3. Dezember 2003 14:11
An: [EMAIL PROTECTED]
Betreff: BUILD FAILED
BUILD FAILED
file:C:/Ant/bin/build.xml:34: no source files and no packages have been
specified.
Build file contains;
-
Ant -version runs ok from c:/Ant/bin
Scratching my head why it cant
BUILD FAILED
file:C:/Ant/bin/build.xml:34: no source files and no packages have been specified.
Build file contains;
-
Ant -version runs ok from c:/Ant/bin
Scratching my head why it cant find the source and packages?
Ant 1.5.4
JDK j2sdk1.4.1_06
thanks in
58 matches
Mail list logo
